Get Started

Getting started has never been easier. Select a category from the pull down or search for more information. This list is pulled from our Blog, Video, and Tips areas. Looking for products? Check out our Start-Up Kits.

Help! My Patterns Are Growing...

My panels always grow, even though I use pattern shears. Should the pieces, once cut and ground, fit in the white part of the pattern leaving the black lines to represent lead or foil? That is exactly where the pieces should fit. But as you have found out, sometimes thats easier said than done. Lets take a look at all the places your pieces can grow 1) Making a copy of your pattern for cutting out pattern pieces. First, determine if the line width on your pattern is appropriate for copper foil or lead. When tracing the pattern, try a few different felt pens until you find one that is the appropriate width for the technique you are using. The wrong width pen may cause the pattern pieces to be either too big, or too small. A good way to determine the appropriate width is to make some test cuts

Nov 05, 2010

Stained Glass Start Up Kit Unboxing

Its Back 2 School Season. For all of our glass enthusiasts, make sure you are equipping yourselves with the essentials in our all-in-one stained glass start up kits. Stained Glass Start Up Kit https //www.delphiglass.com/tools-supplies/tool-kits/stained-glass-start-up-kit

Does using a wider foil on my project make it stronger?

Does using a wider foil on my project make it stronger? Your project may be a little bit stronger with a wider foil since a wider solder line will tend to keep a seam from bending or flexing more than a narrower one. However, its not enough of a difference to be a major consideration in choosing a foil width for your project. The more likely reasons for choosing one foil width over another are as a design feature. You may want wider or narrower solder lines in certain areas of your project. to account for thicker or thinner glass. Youll need to choose an appropriate width of foil to have your solder line remain a consistent width. If you think strength or structure is a problem, some reinforcing other than just a wider foil is going to be necessary. For minor reinforcing, ask your supplier for a reinforcing strip.

Oct 28, 2010

Question & Answer | Delphi Live

Join in as Roy and Val answer some common questions when it comes to different topics such as fusing and stained glass best practices.

Tiffany Lamps: You Can Do It!

Thanks to a wide assortment of patterns, molds and instruction, its easy for hobbyists to make Tiffany style lampshades. We should mention right away that when we refer to Tiffany Style Lamps, were talking about lamps that are made on a mold (or form the terms are interchangeable). If a mold isnt needed, the lamp would be considered a Flat Panel Lamp. Making Tiffany style lamps is actually quite similar to making stained glass windows. The main difference is that after youve cut and foiled the pieces for your lamp, you solder them together on a mold, instead of on a flat surface. This is what gives the lamp its rounded shape. Most of the pieces in a Tiffany lamp need to be quite small to conform to the rounded mold. Thats why this type of shade, by its nature, has a considerable number of pieces. Most popular designs

Apr 28, 2011

GST Bevels | Delphi Live

Our annual bevel sale is going now (March 2025 - April 2025) so we think it’s the prefect time to talk about premium GST Bevel Clusters. They have been designing and creating quality bevel clusters for over 30 years. Hear from Roy and Val as they share all the reasons we love creating with these premium clusters. GST Bevels https //www.delphiglass.com/search?searchtext=gst%20bevel

How to Use Two Pieces of Mirror Back-To-Back

Can I use two pieces of mirror back to back in a window so it will look nice from both sides? Yes, you can. Like any pieces of mirror you use in a panel, youll want to use a sealant of some kind (ask your supplier for a recommendation) on the edges and back side of each piece before placing them back to back. The sealant is used to help prevent black rot a discoloring of the mirror caused when something nasty, most likely the flux, gets between the mirrored surface and the glass itself. The sealant is applied after youve cut and ground each piece of mirror to its final shape. Once the mirrors are cut and sealed, hold them back to back and wrap a wide foil (probably 3/8 if youre using 1/8 thick mirror) around the edge of both pieces together. You now have a piece thats

Mar 16, 2011

Delphi Superior Foil | Delphi Live

Introducing Delphi Superior Foil. During this Facebook Live Roy and Val are talking about foiling basics. Learn why you would use a color backing, what sizes to use and more. Superior Foil https //www.delphiglass.com/search?searchtext=superior%20foil

Delphi Purchaser Inspires Veterans Day Sale

Pam Peters, one of Delphis purchasers, shared the happy news this week that her niece just returned home from the Iraq War. An unexpected and exciting twist was that her nieces husband was also sent home, reuniting the couple with family and friends. 1st Lt. Platoon Leader Crystal Sklodowski and 1st Lt. Platoon Leader Tom Sklodowski (pictured top left) met during Army training and married on May 15, 2010. They both arrived safely home on Nov. 7, just in time to celebrate Veterans Day. In honor of all the courageous veterans that have served our country, Delphi has discounted the Patriotic Engraved Bevel for a limited time, Nov. 10 through Nov. 17, or while supplies last. This God Bless America bevel makes a beautiful addition to any patriotic stained glass project. Download our free project guide. Wed like to take a moment to thank our military and their families, and

Nov 09, 2011

Using a Solder Wick

Use to easily wick away excess solder and achieve the perfect solder lines. Can also be used to remove a piece thats already soldered in place, as shown in action image. Simply flux both project and solder wick, then place wick over desired area, heat with soldering iron and watch the wick absorb the excess solder while sliding it out of the solder line. Ideal for removing solder for stained glass repairs or for simply cleaning up messy solder lines. 5 foot strip packaged in convenient dispenser roll for tangle-free storage.

7 Holiday Projects Under 3 Hours Each

If youre looking to share some homemade love this holiday season, but dont have a lot of time, consider making one of these easy art glass projects. They take fewer than 3 hours to complete, and you can download the project guides for free. Purse Hangers Wine Bottle Stoppers Gingerbread Cottage Night Light Opaline Striker Frit Balls Bowl Fused Game Set Box Monogrammed Mens Accessory Set Keepsake Necklaces Which project is your favorite? Tell us in the comments section below, and well pick one person to receive a free purse hanger on Wednesday, Nov. 30. Gingerbread cottage night light made by artist Julie Haan.

Nov 28, 2011

Reinforcing Stained Glass Windows

Reinforcement is necessary on larger windows. As a rule of thumb, a window more than three square feet should be reinforced. Either reinforcing bar or rod may be used for support. Be sure to consider this when designing the window so that the reinforcement does not intrude or compromise the design of the finished work. In either case the reinforcement is soldered to the back of the panel in one of two ways. The bar should be pre-tinned before use. You will solder the bar in several places at intersecting lines on the window. Rough the areas to be soldered on the bar with steel wool. Apply flux and coat the areas with solder. Doing this will make soldering the bar to the window much easier. Place the bar on edge and solder to the window in the predetermined areas. When using rod, a length of pre-tinned wire is first

May 20, 2012

Tiny Angel Kit | Delphi Live

During this Facebook Live Roy and Daisy walk you through our latest projects created with our exclusive Angel Bevel Kit. Tiny Angel Bevel Kit https //www.delphiglass.com/bevel-clusters/religious-holiday/tiny-angels-bevel-panel-kit

Top 10 Most Popular Art Glass Products of 2012...so far

2012 is looking like a banner year for art glass. To give you an idea of what your fellow artists are creating, weve compiled a list of our top 10 most popular products since January. Among the most notable trends of 2012 are fused jewelry and bottle art. In particular, artists are loving Colour de Verres round bead molds and our wide selection holey molds. We are also seeing a growing interest in bottle art. Bottle art is everywhere on social networks and in our artist gallery. Artists have dedicated entire Pinterest pin boards to Bottle Art (Delphi included). Number one on our list is the Craig Mitchell Smith 7-Piece Floral and Foliage mold. Customers are loving its quality and versatility, and Craig is becoming quite the celebrity. Check out the list for other notable favorites. Whats your favorite product so far this year? 1. Craig Mitchell Smith Floral and

Mar 06, 2012

Sandblasting | Delphi Live

During this Facebook Live Roy and Val talk about sandblasting and show you how it’s done. Plus how to use it for stained glass, fusing and more. Sandblaster Cabinet with Gun https //www.delphiglass.com/sandblasting/sandblasters/sandblasting-cabinet-with-gun

Art Glass: A New Pastime in China

For the last few years, Dan Daniels, founder of Delphi Glass, has had his eye on China. With its rich art history and growing middle class, the country offers a new opportunity for the largest art glass retailer in America. In the United States, art glass, like woodworking or quilting, is a popular pastime. But until recently, China didnt have the luxury of pastimes. Ten or even five years ago, the Chinese didnt have the time or money to take on a hobby, Daniels said. Now thats starting to change. As a result of economic development, leisure-time activities are becoming more and more common in China. People are spending free time with their families, playing outside or visiting the mall. But there are no big box craft stores offering paper crafts, jewelry or sewing supplies in China. The craft industry as we know it in the U.S. is simply non-existent.

Mar 20, 2012

Studio Pro Table Lamp Kit | Delphi Live

Roy and Daisy will walk you through the process of creating lampshades for the Studio Pro Table Lamp Kit. We will be showing it done using fused glass as well as stained glass. Shop the lamp https //shorturl.at/p4Mii Download Daisys Patterns https //shorturl.at/fzDQw

Light Up our Blog Series: Katalin Szabo

Katalin Szabo completed a 9,000 piece jigsaw puzzle about a year ago, and found herself bored by completion. The puzzle lacked the creativity Szabo was seeking. Her husband suggested she learn the art of stained glass and now shes hooked. This was her first stained glass lampshade (we were impressed to say the least). Szabo says she made all the mistakes possible in the process of making her lamp, but learned a lot in the process. What did you learn in the process of making your first lamp? Tell us in the comments section below, and on Friday, May 11, well pick one person to receive Making Stained Glass Lamps book, complete with full-sized patterns.

May 07, 2012

Creating with Studio One Pre-Cut Kits: Step-By-Step | Delphi Live

We have received feedback requesting step-by-step instructions on creating with the Studio One Pre-Cut Kits. So during our Facebook Live Roy and Daisy walk you through the process. Pre-Cut Kits https //www.delphiglass.com/stained-glass-supplies/pre-cut-kits/

5 New Items Just Announced in Stained Glass News

Heres our list of 5 Favorite New Items from the May 2012 edition of Stained Glass News. 1. Hot, Hot, Hot by Christine Stewart Celebrated glass artist Christine Stewart brings us a long-anticipated new title. In her signature mosaic style she serves up 18 projects ranging from fused glass dinnerware to stunning mosaic wall art created with fused inclusions. 2. Inspired by Frankye Cartner and Suzy Huber This stained glass pattern portfolio contains 16 designs for panels in a variety of themes. Each project includes recommendations for using wire, bevels or other accents, and a suggested enlargement size. Projects are certain to provide a fun challenge for beginners and intermediate artists alike. 3. Assembling 3D art just got easier with Handy Wedges These simple non-slip foam rubber blocks offer the perfect solution when you find yourself in need of another set of hands. The triangular shape lends itself to

May 14, 2012

Glass Showroom Tour - Stained Glass Edition

Take a tour of our stained glass section in our Lansing creativity showroom.

Stained Glass News Extends Their Contest

Extra. Extra. Read All About It Stained Glass News has Extended the Deadline to Enter the 25th Anniversary Contest Creating glass art is rewarding. Designing glass art that is stylish and functional is even better. What could make it even more amazing? Winning huge prizes just for sharing your project. Stained Glass News has just announced that the entry deadline for their 25th Anniversary Contest has been extended through February 28th, 2013. You get 8 incredible extra weeks to dream up new designs and send your submissions. Get more details about this contest in our Contest Announcement blog post, or get the contest rules and entry form to enter today.

Jan 04, 2013

Creating Stained Glass with Paper & Fabric | Delphi Live

Roy and Daisy will walk you through the process of fun ways to incorporate fabric and paper into your stained glass project. Supplies used https //www.delphiglass.com/search/FBLive071724

National Book Lover's Day Gives Me an Excuse to Celebrate

National Book Lovers Day is a lesser known holiday - much to my disappointment. Its celebrated on August 9th every year. I love books. I love books so much that in my house, every day is Book Lovers Day. Im hoping youll join me in celebrating for this one day at least though. A book is a gift you can open again and again. Garrison Keillor A home without books is like a room without windows. Horace Mann Books have always held a special place in my heart. They open up a world of new possibilities to me. Each time I come back to a book, I bring fresh experiences and perspective to it, which lets me take something new away from it. Art books are no different. In addition to the bones of the process, the invaluable instruction that they present, they offer an opportunity to dream and create.

Aug 07, 2013

Adding Zinc and Handy Hangers to Round Panels | Delphi Live

Learn from Roy and Daisy how to create a zinc frame to round and oval panels. Plus, see how to add Handy Hangers to them. Zinc Came https //www.delphiglass.com/search?searchtext=zinc%20came%20 Pliers https //www.delphiglass.com/search?searchtext=pliers

Stained Glass News November 2013 Edition

Heres our list of 5 Favorite New Items from the November 2013 edition of Stained Glass News. In addition to information packed articles, every issue of Stained Glass News features the newest items for glass artists. Read on to learn more about these exciting supplies. 1. Papyros Kiln Shelf Release Paper in Precut 13 Rounds Time seems to be in short supply these days, especially during the busy holiday season. Save time and say goodbye to wasted shelf paper with Papyros Precuts. The convenient 13 round pieces are die-cut to fit your 14 16 kiln, so youll never be stuck trimming shelf paper when youd rather be cutting glass and creating. Each piece offers the full benefits of this favorite kiln liner it holds up, often for several firings, and clean up is a snap. At Delphi, you can find Papyros

Nov 11, 2013

Studio Pro Smoke Absorber

Hear from our stained glass expert Roy why he loves the Studio Pro Smoke Absorber. Were sure it will be your favorite too.

Kokomo Glass: The Oldest Glass Manufacturer in America

According to historian Paul Crist who wrote An Early History of Kokomo Opalescent Glass Company in 1998, the stories behind the company sound more like the makings of a soap opera than a business plan. But despite the companys somewhat fractured past, Kokomo has upheld its reputation for exceptional glass products. Since 1888, it has been producing some of the finest glass in the world, and remains the oldest manufactory in America of its kind. Charles Edward Henry opened Kokomo Glass Factory in Kokomo, Indiana after he managed to negotiate a free factory site and cheap gas rates with community leaders. The once agriculturally based town was booming with business opportunities thanks to the discovery of natural gas. Glass production began on Nov. 13, 1888. The company specialized in colored opalescent glass, which at the time was a relatively new product. The superintendent and chemist of the company, Henrys business

Aug 12, 2010

Creating Stained Glass Mirrors

In this Facebook live video we are talking about creating a stained glass mirror. Roy and Val walk you through of process of cutting your mirror, sealing it, creating the boarder and assembly. Shop supplies shown in this video. https //www.delphiglass.com/search/FBLive031324

Peacock Lamp Lights Up Our Blog

Choosing a winner for the Light Up Our Blog contest was virtually impossible. With more than 30 unbelievable entries, how could we choose just one? Ultimately this peacock gem stole our hearts. Daisy C. from Tucker, GA will receive a Flower Power premium glass pack from Uroboros. You can read her story below. Well be featuring many other entries on our blog and in our catalogs in the future, so check back frequently and thanks to everyone who entered the contest. View other entries on Facebook or view a slideshow of entries. I am Daisy Comer. I leave in Tucker, GA. I have been working with Stained Glass for about 10 yrs. I started with class at Colonial Stained Glass in Marietta, GA. Donna and Susan taught me well. My shop is in my sunroom on the back of my townhouse. It is a nice setting and I love working

Mar 05, 2012

Copper Foil Overlay | Delphi Live

In this video we are talking about copper foil overlay for stained glass. Roy and Daisy walk you through of process with tips and tricks along with a how-to demo. Hakko Soldering Iron https //www.delphiglass.com/soldering-supplies/soldering-irons-tips/hakko-fx-601-soldering-iron Copper Foil https //www.delphiglass.com/search?searchtext=Copper%20foil Copper Backed Foil Sheet https //www.delphiglass.com/copper-foil-supplies/copper-foil/edco-copper-backed-foil-sheet Glass Pro Flux https //www.delphiglass.com/soldering-supplies/flux-finishing-chemicals/glass-pro-flux-4-oz

Spring into Inspiration!

As the weather starts to warm up, everything around us begins to blossom again. The flowers bloom, the trees start to turn green again and the birds come back to sing for us. It all means that spring is here. Now is the time to embrace this beautiful season where nature seems to be calling us back out into the wild. When you think of spring, what comes to mind first? Is it flowers? Or birds? Perhaps it is a beautiful landscape that’s lit up by the lingering sun that now sets later in the evening. Whatever it is, all you need to do to find inspiration to create something spectacular is open your door and walk out into the world. But if birds and flowers aren’t your idea of the perfect theme for your next stained glass, fused glass, mosaic or glass jewelry project, you’ll have to dig deeper.

Mar 30, 2016

Stained Glass Boxes & Hinges | Delphi Live

Want to create your own custom stained glass box? Roy and Val show you how to construct, assemble and work with the tubes and rods. Stained Glass Boxes book https //rb.gy/v3xntt Box Supplies https //tinyurl.com/2p9npf8a

Holiday Gift Ideas for the Stained Glass Artist

There are only 52 days left until Christmas. Have you started your holiday shopping yet? If not, Delphi has you covered with some bright and shiny ideas for the stained glass artist in your life. Here are some we think will be very well received if you tuck them under your tree. 1. Stained Glass A stained glass artist can never have too much glass to work with. We carry a huge selection of stained glass. Why not order some new and exciting colors for your favorite stained glass artist? Try something different like the Van Gogh glass that is almost too pretty to cut. Plus with glass packs and sample sets, your recipient will get a gorgeous array of glass to work with in one fabulous package. 2. Studio Pro Caddy If you’re stained glass artist has tools all over the place in their studio, perhaps a Studio Pro

Nov 03, 2016

Lead Came | Delphi Live

Learn about lead came basics. Roy and Daisy will walk you through of process as well as show a few demos. Lead Came https //www.delphiglass.com/search?searchtext=lead%20came%20 Panel Vise https //www.delphiglass.com/tools-supplies/assembly-tools/panel-vise Lead Stretcher https //www.delphiglass.com/lead-came-supplies/came-saws-tools/lead-stretcher

Holiday Gift Ideas for the Stained Glass Artist

Nov 03, 2016

Creating with Bullseye Holly Berry Glass | Delphi Live

Roy and Val will show you how to cut it and use it for both fusing and stained glass. Bullseye Holly Berry https //www.delphiglass.com/bullseye-glass/fracture-streamers/bullseye-fracture-streamers-holly-berry-on-clear-90-coe Dichroic Flakes https //www.delphiglass.com/search?searchtext=dichroic%20flakes Rapid Fuse https //www.delphiglass.com/fusing-supplies/chemicals/bullseye-glastac-gel-fusing-adhesive-4-oz Boron Spray https //www.delphiglass.com/fusing-supplies/fiber-paper-shelf-wash/zyp-boron-nitride-mold-release-13-oz

Holiday Gift Ideas for the Stained Glass Artist

Nov 03, 2016

Working with Patinas | Delphi Live

Dive into using patinas on stained glass projects. Roy and Val will show you how to use each as well and tips and tricks. Novacan Patina for Lead and Solder https //www.delphiglass.com/soldering-supplies/flux-finishing-chemicals/novacan-black-patina-for-lead-and-solder-8-oz

Holiday Gift Ideas for the Stained Glass Artist

Nov 03, 2016

Stained Glass Spinners | Delphi Live

Roy, Daisy and Val show you how we created our spinners as well as assembling plus tips and tricks. Came Notcher https //www.delphiglass.com/lead-came-supplies/came-saws-tools/90-degree-notcher Patina Buddy https //www.delphiglass.com/soldering-supplies/flux-finishing-chemicals/patina-buddy Came Hangers https //www.delphiglass.com/search?searchtext=hangers

How to Sign Up for Delphi Classes

Now that we’re into the New Year, perhaps you’ve made a few resolutions regarding your glass art. Maybe you’ve vowed to learn a new technique or delve deeper into the glass art of your choice. Whatever the case may be, Delphi has many classes scheduled for this year and you can be a part of them. Not sure how to sign up for a class at Delphi? Just click here to get right to our classes home page. Once there, you can browse classes by craft. There are classes for stained glass, mosaics, fusing, jewelry and flameworking. In this section, you can also look up special store events to see what’s happening at Delphi or you can choose to search by guest instructor if there’s an artist you’d most like to have the chance to learn from. One of the best tools is the class calendar. It gives

Jan 06, 2017

Weller 80 Watt Soldering Iron with LED Halo Ring

We love the light ring on this soldering iron. Order yours https //www.delphiglass.com/soldering-supplies/soldering-irons-tips/weller-80-watt-soldering-iron-with-led-halo-ring

Think Spring Thoughts

While it’s true that the groundhog predicted 6 more weeks of winter and most of the country is blanketed in snow, you can cheer up knowing that spring is right around the corner. When you find yourself trapped indoors due to the freezing temperatures and piles of snow, you can warm up with toasty thoughts of the upcoming spring season. Let those spring thoughts fuel your creativity and passion for art glass. There’s no limit to what you can create with fused glass, stained glass, mosaics, and glass jewelry. Let the world of spring be your inspiration. Spring is when the land wakes up again, with blooming flowers and trees that grow back their leaves and show their first signs of fruit. Spring is when animals come out from the hollows and explore the world anew. It’s a tremendous time of rebirth from the ground up. Don’t

Feb 09, 2017