.jpg)
.jpg)
Casting Supplies
| $49.95 USD |
High temperature shelf and mold primer is designed to handle higher temperatures. Create flawless castings, avoid glass sticking to molds. Recommended kiln wash for casting molds including premium Colour de Verre casting molds. Applies smoothly for clean removal of your casting. Powder, requires mixing before use. Includes directions (listed below). 5 pound container. Directions: Mix 1 part powder to 5 parts water. Mix thoroughly. Apply evenly to shelf with soft bristle brush 4 or more times. Cure primed shelf or mold at 550°F for 20 minutes. Remove used primer by vacuum, brush or damp sponge. Note: Mixed solution will precipitate to bottom of container. Shake vigorously. Use the included marbles to assist with the mixing process.
High temperature shelf and mold primer is designed to handle higher temperatures. Create flawless castings, avoid glass sticking to molds. Recommended kiln wash for casting molds including premium Colour de Verre casting molds. Applies smoothly for clean removal of your casting. Powder, requires mixing before use. Includes directions (listed below). 5 pound container. Directions: Mix 1 part powder to 5 parts water. Mix thoroughly. Apply evenly to shelf with soft bristle brush 4 or more times. Cure primed shelf or mold at 550°F for 20 minutes. Remove used primer by vacuum, brush or damp sponge. Note: Mixed solution will precipitate to bottom of container. Shake vigorously. Use the included marbles to assist with the mixing process.
Whether casting an entire project, embellishments for a larger project or creating fabulous custom jewelry Delphi offers a mold for every project! Delphi tip: When casting glass be sure to use a high-temp mold release such as Primo Primer or MR-97.
