Delphi and Covid-19

The safety of our customers, vendors, and employees is our #1 priority. As a result, our retail store and call center are closed and there may be shipping delays.

1/4" Black Lined Foil - 1.0 Mil

1/4 Black Lined Foil - 1.0 mil 188274_1 thumbnail image 188274_2 thumbnail image 188274_3 thumbnail image
See all images and other views
1/4 Black Lined Foil - 1.0 mil
Price $11.95
Your Savings: - $2.50
Your Price: $9.45 USD   (21% Off)
Item# 425684
In Stock Usually ships in 1 to 2 business days.
Check Out Related Media
Art Glass TV

Product Features

  • Easy to apply copper foil tape for stained glass art
  • Black core hides the appearance of foil on transparent glass
  • Built-in dispenser keeps roll orderly
  • 1/4" width good for slightly thicker glass

Product Description

Studio Pro Black Lined Copper Foil will attach securely to glass edges and corners to provide a smooth, uniform solder bead. Built-in plastic dispenser keeps rolls orderly. 1/4" width is useful for slightly thicker glass. Standard 1.0 millimeter thickness. 108 foot rolls.

When To Use:
Black-lined copper foil has an internal black core to help hide the appearance of the foil. Use on clear, non-opalescent glass and mirror.

Santa project pattern by Dodge Studio Designs. Artist: Jenny Neat. From Delphi's Online Artist Gallery.

Customer Reviews

5 out of 5 stars
5 star  
   4
4 star
   0
3 star
   0
2 star
   0
1 star
   0
See all 4 customer reviews
Write a customer review

Product Images from Customers

Be the first to share product images with other customers
[+] Add a Product Image
5 out of 5 stars
  •  
By on
Pros :
Cons :
Was this review helpful to you?  
5 out of 5 stars
  •  
By on
Pros :
Cons :
Was this review helpful to you?  
5 out of 5 stars
  •   Copper Foil
By on
Pros : This is a great foil. It is thick, sturdy and consistent. Also has good adhesive.
Cons : I can't think of a con.
Was this review helpful to you?  

See all 4 customer reviews
Related Content
The Correct Way to Mitre Lead for Diamonds
Sep 13, 2010
Can you please tell me the correct way to mitre the lead for diamonds? Diamonds can be tricky. This diagram shows the way we would go about cutting the lead for a diamond. We find the easiest way to decide where to mitre the lead is by drawing lines on the diamond connecting the opposite points. Then, put a piece of lead on the glass and extend that line onto the lead. Now remove the lead and cut it where you marked. Replace it on the glass, lining it up where it belongs and mark the other end of that piece of lead. Cut it, replace it, and continue until all of the pieces of lead are cut. Reprinted with permission from Stained Glass News. All rights reserved.
Cutting a Pattern Properly
Oct 12, 2010
When cutting out a pattern, where do you cut? With the proper scissors, is it on the line or left or right of the line? If, by proper scissors, you mean the three-bladed pattern shears, you want to cut by placing the center blade of the shears right on pattern line. The two outside blades will then cut the pattern on either side of the center blade. This removes a small strip of paper between each of the pattern pieces. You need to make sure youre using the right shears for the method of construction youve decided to use. Foil shears allow for two thicknesses of copper foil. Lead shears have a thicker center blade which allows for the heart of lead came. If you are using regular scissors (that dont have the extra blade) you will need to cut twice, once on each side of the line, for your
Help! My Patterns Are Growing...
Nov 05, 2010
My panels always grow, even though I use pattern shears. Should the pieces, once cut and ground, fit in the white part of the pattern leaving the black lines to represent lead or foil? That is exactly where the pieces should fit. But as you have found out, sometimes thats easier said than done. Lets take a look at all the places your pieces can grow 1) Making a copy of your pattern for cutting out pattern pieces. First, determine if the line width on your pattern is appropriate for copper foil or lead. When tracing the pattern, try a few different felt pens until you find one that is the appropriate width for the technique you are using. The wrong width pen may cause the pattern pieces to be either too big, or too small. A good way to determine the appropriate width is to make some test cuts
See more related content