7/32" Copper Lined Foil - 1.0 Mil

7/32 Copper Lined Foil - 1.0 mil 188271_1 thumbnail image 188271_2 thumbnail image 188271_3 thumbnail image
See all images and other views
7/32 Copper Lined Foil - 1.0 mil
$8.95 USD
Buy 3 or more for $7.65 each
Item# 425681
In Stock Usually ships in 1 to 2 business days.
Check Out Related Media
Art Glass TV

Product Features

  • Easy to apply copper foil tape for stained glass art
  • Built-in dispenser keeps roll orderly
  • Standard 7/32" width good for most stained glass projects

Product Description

Studio Pro Copper Foil will attach securely to glass edges and corners to provide a smooth, uniform solder bead. Built-in plastic dispenser keeps rolls orderly. Standard 7/32" width and 1.0 millimeter thickness. 108 foot rolls.

Project created by artist Carrie Knickerbocker. From Delphi's Online Artist Gallery.

Customer Reviews

4.5 out of 5 stars
5 star  
   5
4 star
   0
3 star
   0
2 star
   0
1 star
   1
See all 6 customer reviews
Write a customer review

Product Images from Customers

Be the first to share product images with other customers
[+] Add a Product Image
5 out of 5 stars
  •   Foil
By on
Pros : Good product plenty of tackiness, nice thickness, nice price
Cons :
Was this review helpful to you?  
1 of 2 people found this review helpful
1 out of 5 stars
  •   Jules
By on
Pros :
Cons : I have found some of these tapes to be old. When I go to use it, flex it, then add low heat to it it comes away from the glass. Even after careful recleaning, new fluxing.
Was this review helpful to you?  
2 of 3 people found this review helpful
5 out of 5 stars
  •   Great Stuff
By on
Pros : Works great! Especially with my foiler.
Cons : None yet.
Was this review helpful to you?  
1 of 2 people found this review helpful

See all 6 customer reviews
Related Content
How to Choose the Right Copper Foil for Your Works of Art
Oct 16, 2017
When creating stained glass art, the size and type of foil can be tricky. For newcomers to this type of glass art, many questions arise as to which copper foil is the right one to use. Fortunately, Delphi Glass has some handy tips to help you make the right choice every time. 1. Foil width You might be inclined to select foil that creates skinny lines, however they are not as strong. That’s because you can’t apply as much solder. For most projects, you’ll find 7/32” copper foil will be suitable, however if you vary the width of the foil it will add more depth. If you’re using thicker glass, 1/4" foil will create a seam of normal width. But if you want special effects, take a razor knife and trim the copper foil after you apply it to the glass. Creating distance in your piece can be done
Protecting Stained Glass from the Elements
Aug 09, 2010
I want to make some copper foil and lead projects for use outside. How do I protect them from the elements? If you construct your project using the lead technique, there isnt anything else you need to do. The cementing process weatherproofs the project. If you use the copper foil technique, you will want to make sure that there is something to prevent the copper foil from pulling away from the outer edges of the project when it gets wet. This can be accomplished by using a rigid metal channel (zinc, copper or brass) or by soldering a reinforcing wire around the perimeter of the piece. Another thing you should consider is using mosaic techniques. Either the direct or indirect methods are great for outdoor projects. Your supplier will have information on these techniques if you are unfamiliar with them. Whatever technique you choose to employ, it is best to
What is Tinning?
Aug 13, 2010
In my reading I keep seeing mentions of tinning. What is it, and how do I do it? Tinning is the term used to describe the action of putting a thin coat of solder over something else, for instance copper foil, a brass vase cap, or a soldering iron tip. One reason may be to protect the metal from the air, which is usually in reference to a soldering iron tip. The other purpose may be to color the metal underneath, which we’ll address here. You may have seen it suggested that you tin all exposed copper foil on the surface of a panel before running a solder bead. (You will need to apply flux before tinning and again before running the bead.) Some people feel that this allows them to run the final bead more easily because all of the foil edges are already covered. Other people prefer to
See more related content