Approx. Material Cost: $20-$50 (Prices will vary depending on glass and came selected)
Experience Required: None
Type of Class: Demonstration and hands-on project
Class Description: Students will be taught the lead came method of stained glass, including safety, types of glass, patterns, cutting, grinding, cutting cames, soldering, cleaning, and framing. Tools and materials are extra. NOTE: You may want to bring a snack/ lunch for an optional lunch break.
Safety: Please do not work with lead or solder if you are expecting. Do not wear sandals if cutting or handling glass. Safety Glasses are required, provided if needed
Tools & Materials Included: Use of our grinders and saws, glass cutting and soldering tools, lead came, plywood layout board (for class use)
Additional Tools & Materials: Glass for your project - cathedral or wispy only, you may want to purchase extra glass - contact store staff for more info if needed.
Came - #5604 3/8 in. zinc
Optional Tools & Materials: Beginner Lead Start-Up Kit (item #4061) or the equivalent tools (glass cutter, breaking pliers, soldering iron, lead nippers, glazing hammer, horseshoe nails, lead knife) Or: #4060 Ultimate Lead Tool Kit or equivalent (lead nippers, glazing hammer, horse shoe nails, lead knife) and Deluxe Stained Glass Tool Kit (#69100) or equivalent (glass cutter, breaking pliers, soldering iron)
#2404 Fid, if your kit does not have one
NOTE: Students should purchase a kit or tools, glass and came before the day of the class if possible. Please ask for free class pattern when selecting glass.
Pros : I'm 77 yrs old and have never had a craft class in my adult life. I took an all-day class in colored glass with came. It was truly challenging for me but my very competent and patient teacher saw me through to the end - even though she had to extend her time in order for me to complete my project. I brought home a beautiful piece of art to my wife.
Pros : All materials except glass were provided. Participants are able to take home a complete project. Instructor has a lot of knowledge.
Students should bring a few rags to dry off glass pieces after using grinding machine. Paper towels and tissues were available. Rags also do a much better job of shining up the glass piece after removing the first layer of cement.
Cons : Instructor did not know that their were six students, only set up for four. Website showed the class was full, so either manager or instructor was ill informed. This led to people not having the handouts til over an hour in the class, materials were not distributed and a general sense of disorganization. Initial instructions should be written down for instructors: 1. inform students where bathrooms are, 2. ask students to put on a name tag that should already be at station, 3. go over project, steps that will be completed, 4. ask students how much experience they each have do you know which students may need extra assistance, 5. inform students that a half hour lunch break will be given, 6. The table was not preset, the instructor should be set up before students arrive.
Materials in the individual student boxes were not complete. Pencils were missing, permanent markers were dried up. Previous instructors should be held accountable.
Other Thoughts : Pictures should be taken of the completed student projects so future students can get ideas. It is overwhelming in the glass shop when purchasing your glass. If you see a color scheme in a project you want, it would be faster to select the colors.
Pros : Knowledgeable instructor, and plenty of time to work
Cons : As a beginning class, it would have been EXTREMELY helpful to have a few minutes of soldering practice before having to solder my piece. Never done it before, and my lack of experience really cheapened the look of my piece. Very disappointed in that aspect.
The cement we used was old and I'm not sure it will set properly.
Wasn't told (either on the website, or in-store when I shopped for glass the week before class) that there were 3 pattern choices. Would have been nice to know beforehand. I might have made other choices.
Pros : Great class! Steena, the instructor, explained each segment of the lead came process with great detail. The pace and steps to completing the final product was perfect. I did not feel rushed in the end. Each student left with a beautiful completed project. Thank you for your patience Steena, 90 Cutting came at 45 and 90 have become easier.
Pros : I learned a lot from this class was able to complete the project by the end of the day which is critical to be able to experience all the key steps in lead came. I didn't feel rushed at all, and appreciated having the entire day to learn this. Steena did a great job and her depth of knowledge/experience came through in her ability to answer all the questions. We had 6 in the class, but she was able to get to everyone for individual help. I am really glad I took the class and feel confident in my newfound lead came abilities. Just need to get at it. Thanks
Cons : We got off to a bit of a slow start since there was a mixup in the number of people Steena was told would be there and the number who were there, but it worked out fine.
Other Thoughts : The patterns were pretty boring. It would have been nice to have something simple enough to be completed in a day, yet something that I could hang on a window.