get started : platter /

Get Started

Getting started has never been easier. Select a category from the pull down or search for more information. This list is pulled from our Blog, Video, and Tips areas. Looking for products? Check out our Start-Up Kits.

Beginner's Notes: Achieve a Stained Glass Look in Fusing

Beginner's Notes: Achieve a Stained Glass Look in Fusing I saw a free stained glass pattern in the Delphi newsletter that I just loved. I knew if I made it into a stained glass panel, I wouldnt be able to eat off of it. So I set out to create a fused glass platter instead. My husband and I decided to cut all the pattern pieces by hand (thinking about it later, I would have used my Delphi Taurus 3 glass saw). We sandwiched all the fusible pieces between two sheets of transparent 96 COE glass. In the end, I didnt have the heart to slump it into its mold. I made a channel on each side with fiber paper foam and transparent glass, to hang it with.(I have learned to double the channels for the wire loop.) There were some bubbles due to our handcutting and gaps, so the second fusing got rid of some of those. During

Beginner's Notes: Making Glass Feathers

Beginner's Notes: Making Glass Feathers The Feathers of the Phoenix Plate is the most complex plate I have made so far.Making the glass feathers and fusing the plate is an 8-step process. It starts with a glass brick that is fused from layers of transparent and opal glass dammed between four kiln bricks. The brick is then sawed in half and bookended, then fused again. After fusing, the brick is sawed into thin slices with a round diamond bladed Taurus 3 glass saw. The slices are again bookended together and fused with a piece of clear glass on top. All the glass feathers turn out beautifully and never look the same. They can be used in jewelry and plates. The feathers are laid out on a black piece of opal glass and fused flat. Then a transparent piece of glass is placed on top, and the plate undergoes another 12-hour fusing. The last step

MSU Pre-cut Art Glass Lets Fans be Crafty

MSU Pre-cut Art Glass Lets Fans be Crafty At the height of an undefeated season for MSU (and a big win over University of Michigan) Delphi’s new Licensed Pre-cut Glass Emblems couldn’t come at a better time. For the past 38 years, the Lansing-based company has supplied glass artists with high quality art glass supplies and education. But they haven’t been able to offer pre-cut glass mascots and logos until now. These exclusive pre-cuts are designed to make it easy for people, even those with no previous art glass experience, to create MSU-themed projects like garden stepping stones, serving platters, wall art and fashion accessories. Delphi currently carries two designs, the MSU Spartan “S” logo and Spartan Helmet mascot emblem. Sizes range from 1/2 inch to 6 inches. Pre-cuts are available in either aventurine green, a dark green with metallic sparkle, or solid white. Both colors are lead-free and food safe. All glass is tested 96 COE compatible

Fused Glass Paintings by Lula Torgersen

Fused Glass Paintings by Lula Torgersen How did you get started in glass? Glass is a fascinating medium. I was living as an ex-pat in Denmark in 2001 when I had the luck of finding a fusing glass course. I fell in love with the technique immediately. I pursued further classes and a masters since, trying to achieve more. Im also a self learner, I love to study and work on my own. Since then I never stopped looking for ways to improve myself in this beautiful art. Why glass? The first time I went to Murano, Italy, back in 1986 I had the chance to visit glass studios and was astonished by the way the artists worked with the powders and heat. Due to its unique properties, glass continues to be an intriguing material that can reflect, transmit or absorb light. It creates a surprise element which brings eclectic interest to a space without