get started : ring saw

Get Started

Getting started has never been easier. Select a category from the pull down or search for more information. This list is pulled from our Blog, Video, and Tips areas. Looking for products? Check out our Start-Up Kits.

The Right Stuff: Make the Cut with the Taurus 3 Ring Saw

The Right Stuff: Make the Cut with the Taurus 3 Ring Saw Every artist that works with glass knows how important it is to have the right tools. Without them, we’d never be able to bring our visions to life. When cutting glass for a project, a quality cutter is essential. Gemini Saw Company has thought of what we need when cutting glass with the Taurus 3 Ring Saw. Improving on former models, this ring saw has a 1/5 HP motor and is so lightweight at just 14 lbs., you can take it anywhere. Plus, the saw part snap outs of the water bath, turning it into a hand-held saw. It has its own water so it can easily be used as a portable saw. But perhaps the best feature of all is the round diamond bit blade. It’s a 5-3/4” multi-directional blade which means you can cut seamlessly in any direction you choose. The greater blade exposure means more precise cuts.

Demo & Install: Semi-Auto Tray from Taurus

Demo & Install: Semi-Auto Tray from Taurus In this video Dane show you how to install and use the Semi-Automatic Floating Tray for the Taurus 3 Ring Saw. Make precision cuts with ease using the semi-automatic floating tray. This spring-loaded tray fits the Taurus 3 saw (sold separately) and features an adjustable tension knob allowing it to cut with just the right amount of pressure depending on what you are cutting. The magnetic angles make it possible to cut both 90° and 45° cuts. The floating tray comes with a special worksurface that replaces the standard Taurus 3 worksurface. Simply pull the automatic tray back, place your piece between the magnetic angles and then let go. It does the hard work of cutting for you. Ideal for production work, or just giving you a little extra muscle so you arent straining to apply pressure. Can cut pieces up to 5-1/4 long. Must be used with the Slicer Blade (#57109 sold separately). ---- Semi Auto Tray https //www.delphiglass.com/glass-tools/ring-saws/semi-automatic-floating-tray-for-taurus-3-ring-saw Gemini Slicer Blade https //www.delphiglass.com/glass-tools/ring-saws/taurus-3-slicer-blade-kit

Where the Sidewalk Begins: Delphi Glass Sidewalk Sale is Back!

Where the Sidewalk Begins: Delphi Glass Sidewalk Sale is Back! Every year, Delphi Glass holds a special one-day only Sidewalk Sale at Delphi’s Lansing Creativity Center. This year, save the date for Saturday, July 29, 2017. From 10am to 5pm, you can come in and get incredible savings in-store only. Visit Delphi Glass in Lansing to save 50% or even more on the power tools you need to bring your creative glass art ideas to life. Kilns, grinders, ring saws, band saws, and just about every other tool you use will all be marked with the best savings of the year. The savings are only available by coming into the Lansing location so it’s worth the trip to save on one-of-a-kind items, closeouts, discontinued products, and a selection of sheet glass too. You can get everything you need to be creative for even less than before which means you’ll be able to create more than you can imagine.

Taurus 3 Ring Saw Review & Demonstration

Taurus 3 Ring Saw Review & Demonstration The Taurus Ring Saw is an excellent glass cutting tool for making multi-directional cuts. Watch as Delphi Glass store associate Danielle Wagner reviews and demonstrates how to use the Taurus 3 Ring Saw.

Making Pendants and Purse Hangers with the Screen Melt Set

Making Pendants and Purse Hangers with the Screen Melt Set Im always looking for ways to use my scrap, so I decided to give the round screen melt set a try. I had mixed feelings about it, because I made the mistake of not following the fusing schedule, and tried to wing it with my pre-programmed kiln. Despite the error of my ways, I ended up with some very pretty glass using two colors of opal art glass scraps. With my screen melt complete, I used a Sharpie pen to trace out my images, and began cutting them with my Taurus 3 Ring Saw. Once I finished the shapes, I put the pendants and purse hangars back in my skutt Firebox 14 kiln, for a fire polish on the slow tack fuse. Some got bails, some wire wrapping, and the others were epoxied to purse hangers. Looking back, If you follow the Delphi directions labeled as users manual in the

How to Clean the Taurus 3 Ring Saw

How to Clean the Taurus 3 Ring Saw Watch this demonstration by Gemini on how to clean the Taurus 3 Ring Saw. http //www.delphiglass.com/glass-tools/ring-saws/taurus-3-ring-saw

Master Beveler Kent Lauer to Teach at Delphi

Master Beveler Kent Lauer to Teach at Delphi For more than 30 years, Kent Lauer has been working with glass. His passion lies with beveled glass in particular, and hes made a great impact on the craft with his cutting-edge (no pun intended) techniques. Living in Southern California, Kent has had the opportunity to work on custom glass for Hollywood stars, movies and commercials. He has written articles for Glass Craftsman magazine and Glass Patterns Quarterly. In addition, hes been teaching his techniques to students around the country for more than 25 years. Delphi is proud to have him teach at its Lansing Creativity Center next month. If you live in the Michigan area, or are planning to travel there this summer, we encourage you to look into taking Kents Faceted Dichroic Glass Pendants class. In this class, students make beautiful, faceted dichroic glass pendants and learn awesome cold working techniques. The brand new hands-on class covers all

How to Set Up The Taurus 3 Ring Saw

How to Set Up The Taurus 3 Ring Saw Watch this demonstration on how to set up the Taurus 3 Ring Saw. http //www.delphiglass.com/glass-tools/ring-saws/taurus-3-ring-saw

Donna Sarafis: Basics of Fusing Part 2

Donna Sarafis: Basics of Fusing Part 2 Part 2 of a 2 part series on the basics of glass fusing. In this weeks article Donna gives advice on indispensable tools for beginner glass fusers. In the beginning, I used one larger tool, and that was a Super Star Grinder. It is still running, running, running. Others have come, and some have gone, but this one is still here. For smaller cold working projects, diamond hand pads do a nice job. The next cutting tool that I bought was a saw. My Taurus 3 Ring Saw has worked extremely well for me, and I love what I can do with it that I couldnt do before, but I worked for 2 years before I purchased this nifty item. As for cutters and breakers, I have many, but for me, the Silberschnitt breaker pliers are a must for small (1/4) strip breaking.....saves so much glass. I use both

How to Use the Gryphon Zephyr Ring Saw

How to Use the Gryphon Zephyr Ring Saw Learn how to use the Gryphon Zephyr Ring Saw to cut glass, tile or stone. Achieve cuts that would be impossible to do by hand. DelphiGlass.com offers thousands of supplies for glass crafters. Click on the link to see the tool demonstrated in this video http //www.delphiglass.com/glass-tools/ring-saws/zephyr-ring-saw

Turning Photos into Glass Projects

Turning Photos into Glass Projects My husband and I recently met a spectacular couple, a genuine cowgirl and cowboy. Besides being fortunate enough to purchase a very sweet horse from them, we are proud to be able to call them our friends. While at their home I learned that her one of her best friends, her horse, had passed away the previous year. Yoda had carried her though years on the Rainbow Riders drill flag team, taken her to reigning championships, and safety along countless miles of trails. I wanted to do something special for her, and also try something new for me. I remembered seeing an article in the Delphi newsletter about making fused glass silhouettes from a photograph. While at her home I snuck a picture of her and Yoda sliding to victory, on my cell phone. I downloaded the picture and adjusted it to an appropriate size for a 10 by 10

Marian Stevens: From Website Developer to Glass Artist

Marian Stevens: From Website Developer to Glass Artist How did you get started in glass? I have always admired stained glass but never thought I would have the patience for it. It seemed like the process was daunting. I am the webmistress for my Fremont Harley Owners Group Chapter and a lady in the Chapter created a glass panel to honor another members wife who had passed. I mentioned to her that Id always thought about doing stained glass but figured it was too hard. She offered to come teach me and change my mind. Last April, she did just that. It is labor intensive - but as a website developer Ive developed the patience for intricate things. Why glass? Im a very visual person, have always been artistic, and love vivid colors. Ever since I was little, I remember my mom washing out empty noxema bottles (cobalt blue) so I could hold them up to the light.

How to: Create Faux Opals with Glass

How to: Create Faux Opals with Glass Before I was fortunate enough to own a kiln, I used to experiment with all kinds of polymer clay using recipes for faux gemstones. It was fun and inexpensive. While giving a fused glass lesson the other day, I said, Hey, lets try to make some faux opals. So, we crushed up some green and orange, clear backed dichroic glass (from the Uroboros Magic Box), and mixed in a tiny bit of crushed opaque white glass. We cut two transparent ovals, covered them with Bullseye Glastac Firing Glue, and sprinkled on the frit. We added another layer of glue and piled up some more frit. The beauty of this glue is that you can use as much as you want. I love it for holding the frit on the edges of bowls and glass. The fired pieces looked like opal cabochons. To make the cabochons more opaque, I used my

Simple Solutions to Glass Art Pet Peeves

Simple Solutions to Glass Art Pet Peeves Here at Delphi, we love a good reason to celebrate. With the Holiday Season still looming weeks away, we were feeling anxious for a bit of excitement now. The good news? There are lots of lesser known holidays scattered throughout the year if you only look for them. (September includes a favorite of ours; National Talk Like a Pirate Day.) We needed another zany mood boost to get us through Thats how we found this gem Its National Pet Peeve Week. In honor of this holiday we thought long and hard about what really gets under our skin and pushes our buttons while working on projects. Check out our top glass art pet peeves, and the simple solutions sure to put a smile back on your face. Pet Peeve Disappearing Marker Lines Solution Mark Stay II saves the day. Just wipe

ZN Stained Glass: Capturing Creativity

ZN Stained Glass: Capturing Creativity Think of it this way youre attempting to capture something that doesnt actually exist. A mythical creature that can change shape, even meaning at any given time; and youre expected to do it, again and again, over and over, til the end of time. Sounds all kinds of easy, right? Its actually about as easy as it sounds. Creativity is the mythical creature, Im the person thats supposed to capture it. Thats my life as an artist. More specifically, a stained glass artist. My love of glass started at a very young age--the exact age doesnt matter--but I know I was short enough to be patted on the top of my curly head by hundreds of people while they called me small boy since I was too painfully shy to introduce myself. I was dragged through hundreds of cathedrals and museums here and abroad. I saw the works of