Shop By Category
get started : studio pro,studio pro

Get Started

Getting started has never been easier. Select a category from the pull down or search for more information. This list is pulled from our Blog, Video, Project, and Tips areas. Looking for products? Check out our Start-Up Kits.

Featured Artist: Kerry Collett

Featured Artist: Kerry Collett How and when did you get started in glass art? I saw an article about Kristin Frantzen-Orr along with a step by step example of how to do one of her famous floral beads. I talked about it so much my husband bought me a beginning torch set for the following Christmas. Once I got the kiln and the duel fuel torch, I just kept experimenting and growing from there. Kristin is still my idol and I keep telling myself that one day I will do nice, clean floral beads like hers. Your jewelry, vases, plates etc. are all beautiful. I especially love the geologic nature of your Copper Reactive dish, its so unique. Can you tell us a little about how you achieved that look? The base glass is Bullseye Steel Blue Opal (000146) and it reacts all on its own. I used clear stringers and broke up chunks

The Importance of Packaging

The Importance of Packaging We tell ourselves not to judge a book by its cover, but the simple truth is, we are attracted to whats attractive. On a recent hunt for a birthday present for my mother, I came across several beautiful handbags in several different boutiques. What ultimately influenced my final purchase decision was the complimentary gift-wrapping offered by one of the storeowners. The handbag itself wasnt any prettier or better quality than the others I was considering, but the packaging was beautiful. Brightly colored tissue, a big sturdy box, quality wrapping paper and an oversized hand-tied bow. No, it wasnt sealed with a kiss, rather a large gold embossed sticker with the boutique name and logo (theres nothing wrong with a little discreet self-promotion). Here are a few tips for better packaging-it might just buy you your next customer. 1. Show your customers what theyll get. The boutique I mentioned earlier had

Learning the Hard Way

Learning the Hard Way Delphi merchandiser Kayleigh McGrath recently shared some photos from her early days at Delphi. She was playing around with different colors and textures of glass and learning the hard way that there are limits to what you can do (and cant do) in fusing. The first image shows what happened when Kayleigh layered dichroic glass, coating to coating. The base is 90 COE dichroic rainbow pixi stix on black, (Delphi item 921714) and the top is an old texture we dont carry any more (cyan red radium on clear.) The second image is of a piece Kayleigh loved so much she impatiently removed it from the kiln when it was still too hot (havent we all done this. ) As you can see, it suffered thermal shock. This was made with the same 90 COE pixi stix on black for the base and capped with Delphi item U630090 90 COE

Dealer Spotlight: Abstract Stained Glass

Dealer Spotlight: Abstract Stained Glass When John Falibota of Girard, Ohio, told his wife he was going to take a stained glass class, she couldnt stop laughing. John had a life-long fear of cut glass. If a glass broke in the house, he wouldnt go near it for fear of cutting himself. But over time his fear subsided, and in 1984 he and his wife, Marlene, started attending craft shows and eventually opened their very own stained glass store in 1999. Their 1,200 sg. ft. store provided classes and supplies as well as fulfilled custom orders. Seven years later, they moved to an even larger store (2,375 sq. ft.) and added imported blown glass and Russian glass animals to their inventory. Due to the tough economic climate, John and Marlene recently moved again to a smaller store (1,600 sq. ft.). They dropped the imported glass and returned to their roots-teaching, supplies and custom work. They

4 Ways to Stop Procrastinating Today

4 Ways to Stop Procrastinating Today Chances are, right now, in reading this blog post, youre avoiding an overdue task. I too was avoiding a laundry list of work-related tasks in writing this. Procrastination is a part of life, and its certainly always been a part of mine. As a teenager, my parents would accuse me of putting off everything from piano practice to math homework. Id vehemently deny their charges hissing back, I work better under pressure. The truth was, I often felt overwhelmed, under-productive and anxious. Over the years, Ive been able to combat my avoidance issues using 4 tools. The trick is constantly reminding myself of these actions, because they do not come naturally to me. 1. Just Say No. I say yes to everything. Need someone to head up that event? Sure. Want me to design 12 posters for the Car Wash? No problem. Take your kid to daycare? Of course.

Featured Artist: Cheryl Syminink

Featured Artist: Cheryl Syminink Its clear from all of your pieces that you love working with bright colors. Where do you get your love for color? I just love color. Without color, life can be dull. Color helps to create mood, passion, emotion and can bring out the best in people. How would you describe your artistic style? I believe that my style can be categorized as beachy. I love the beach and surfing, but I also love the woods and nature, so sometimes its nature inspired. You have done several beautiful mosaics and stained glass panels, and I also understand you do some fused glass work and bead making. Whats your favorite medium and why? I love making mosaics because thats what led me to glass in the first place. I go through spurts though. Ill make a whole bunch of mosaics and then make beads in between. Then Ill switch it up

A Beginner's Trip to Lansing: I'm a Fake

A Beginner's Trip to Lansing: I'm a Fake I admit it. Im a fake. When Delphi hired me to be the Social Media/PR Specialist, I was looking for a reprieve from my graphic design job at a small local magazine. I longed for a more creative outlet. A place where I could learn new things, write about them and interact with others. Delphi was a perfect fit. Only problem was I didnt know a thing about art glass. Id witnessed my mother, a botanical illustrator and painter, create a few large-scale stained glass patterns for her friend (a real stained glass artist), and that was the extent of my experience with the craft. I knew nothing of fusing or sandblasting or lampworking. My experience with mosaics extended no further than my fifth-grade Tessellation project. I felt worthless. I started researching online, talking to Delphi experts and interacting with artists on Facebook and Twitter. I was learning a lot,

Featured Artist: Kexin Wen

Featured Artist: Kexin Wen When and how did you get started in stained glass? Ive been interested in stained glass for as long as I can remember. As a child, I would sit in churches and watch the (often) biblical depictions come to life when a stray ray of sunlight cast its illumination our way. Sun shadows dancing. I dabbled in many media over the years, trying to find an outlet for some of the visions careening inside, but none of them took. Drawing, painting - even watercolours - no amount of professional training could guide my hand in a satisfactory way. But then there was the glass. I lived abroad for a few years, and wound my way through Europe on my way back to the States when I finished my Peace Corps Service. My last international destination was Paris, where one of my closest friends lives as an organist. Two beautiful autumn

Ring of Fire Artist Challenge Pushes the Limits of Creativity

Ring of Fire Artist Challenge  Pushes the Limits of Creativity Delphi Glass and ArtFire, the premier marketplace for handmade crafts, announce a new online art contest. The Ring of Fire Artist Challenge is open to all artisans. Entries are being accepted now. Contest ends June 30 and winners announced July 9, 2010. Following its annual festivities for National Art Glass Month, Delphi has organized another online event with the help of its partner ArtFire. The first annual Ring of Fire Artist Challenge is designed for all artisans of all crafts and abilities, inviting them to use common art supplies in new and creative ways. Artisans are asked to choose one or more items from the 10 products that make up the Ring of Fire. These items range from patterned dichroic glass and fine silver wire to mosaic tiles made entirely from recycled glass. Winners are chosen by popular vote and jury based on technical skill and creativity. A beginners category

Recycle Your Old Art Glass-Make Your Own Frit

Recycle Your Old Art Glass-Make Your Own Frit You can make frit from leftover glass pieces in a few different ways. First, if you have a torch, simply heat your piece of scrap in the flame until it gets red but not drippy. Then drop it into a bowl of water (wearing protective eyewear, of course) and watch as the glass breaks into tiny little pieces. You could also choose to use a Frit Piston. Place compatible glass scraps into the frit piston, insert the upper plunger into the tube and plunge. The nice thing about the piston is that it allows you to create frit in any size you want. Another, perhaps less refined, way to create frit is to wrap your glass in a towel, grab a hammer and have at it. (This works especially well if you’ve had a bad week at work. ) You can also try a good old-fashioned mortar and pestle. This

Master Beveler Kent Lauer to Teach at Delphi

Master Beveler Kent Lauer to Teach at Delphi For more than 30 years, Kent Lauer has been working with glass. His passion lies with beveled glass in particular, and hes made a great impact on the craft with his cutting-edge (no pun intended) techniques. Living in Southern California, Kent has had the opportunity to work on custom glass for Hollywood stars, movies and commercials. He has written articles for Glass Craftsman magazine and Glass Patterns Quarterly. In addition, hes been teaching his techniques to students around the country for more than 25 years. Delphi is proud to have him teach at its Lansing Creativity Center next month. If you live in the Michigan area, or are planning to travel there this summer, we encourage you to look into taking Kents Faceted Dichroic Glass Pendants class. In this class, students make beautiful, faceted dichroic glass pendants and learn awesome cold working techniques. The brand new hands-on class covers all

Household Items You Can Use As Tools

Household Items You Can Use As Tools From our Facebook fans, here are a few household items that can be used as tools in art glass creation. Some great ideas here. Hairspray for gluing (the non-aerosol kind, the cheaper, the better. ) Olive oil for your glass cutter The spoony straw from a slush puppie for pouring small amounts of frit Butter knives for bead making Chinese take out containers for storing smaller pieces of fusable glass. They are rectangular and stack well with a clear lid. Also, the soup containers to store frit (each size of frit in its own container stacked within the others of like color and only the top one needs a lid, and they are clear) Glass yogurt pots for storing frit and other bits Plastic containers that tubs of crystal light comes in for storing smaller pieces of glass. I also save the tubs for mixing glue/water, frit and water, paint,

Cutting Mosaic Backgrounds

Cutting Mosaic Backgrounds 1. Make the glass strips as wide as youd like your mosaic chunks to be. Strips about 1/2 to 3/4 usually work well. 2. Snip small pieces off the strip. Aiming your mosaic cutter straight across the strip will produce squares and rectangles. Aiming the cutter at an angle (the same angle each time you cut) will give you diamonds. A combination of aiming straight across the strip and at alternating angles will produce triangles. 3. Once youve aimed the cutter, just squeeze the handles until a piece of glass breaks off. Or, you can snip pieces off a larger piece of glass. Cut near the edge and work towards the middle. This will produce random moon shaped pieces, which you can use to fill in small areas of background. They also make nice leaves.

Holding Small Pieces In Place While You Solder

Holding Small Pieces In Place While You Solder 1. Make sure that your pieces are clean and dry. Cut a piece of clear contact paper, remove the backing and lay it sticky-side-up over the pattern. 2. This is a perfect way to hold cut glass, globs, jewels, or marbles in place for tack soldering. As you can see in the photo, you can even move the sheet around and, if you are careful, you shouldn’t disturb the glass at all. 3. Tack solder the pieces to each other as you normally would. Then, remove the contact paper and finish soldering the front before turning the project over and soldering the back. Reprinted with permission from Stained Glass News. All rights reserved.

Regular Solder vs. Lead-Free Solder

Regular Solder vs. Lead-Free Solder I have some questions about Lead-Free Solder. Does it tarnish over time? Can you use patina on it? Does it flow like regular solder? Is it better than regular solder? We are sure that you arent the only one with these questions. Lets start with the question of whether or not its better than regular solder. Since the harm from lead is caused by ingestion, any project that will come in contact with food or food containers should be made with lead-free solder. In addition, anything that is handled, like jewelry or kaleidoscopes, should be made with lead-free solder. Hands have a terrible habit of making it into the mouth before they get washed. So, yes it is better than regular solder in these situations. As far as working with solder, you should be diligent about cleaning your hands after touching any solder. Dont eat, drink, smoke, or do anything

Working with Stained Glass on a Schedule

Working with Stained Glass on a Schedule My time is limited and I can only work in 2-4 hour intervals. Are there any preventative steps that I should take to assure that my work will be in good shape when I return? Many hobbyists find themselves in the same position, and this is a very good question. We cant cover every possible scenario, but hopefully we can help. Obviously, there are areas where it wont make any difference if you get interrupted. For instance, pattern prep, glass cutting, fitting, and grinding. However, if you do find that you need to stop in the middle of applying copper foil, youll need to think about how long it will be until you can resume the job. If it will only be a few days, there isnt anything special that youll need to do. But if it will be longer than that (or you live in a particularly humid area),

Dear Delphi: What's Hot in Jewelry Now?

Dear Delphi: What's Hot in Jewelry Now? Do you have a question or comment? Please contact us at DearDelphi@delphiglass.com Dear Delphi, I am a stay at home Mom who loves jewelry. I am looking at different ideas on how to make some extra income and not be away from my two daughters. I have some basic skills but I am more interested in what is hot on the fashion scene. Can you help? Thanks for asking, and we think we have some great ideas and simple solutions for you.The big looks today involve color and metal. Some examples of metal that have become extremely popular are fine and medium gauge wires in sliver and sterling. These wires are used as hooks, shapes and handmade intricate designs. The openness of the wire and delicate sheen of the silver or sterling will give enough bling to your designs.I recommend the book Totally Twisted. It is an outstanding reference

Trend Report Part I-Sea and Sky for Interiors

Trend Report Part I-Sea and Sky for Interiors This season will showcase a greater emphasis on blues and greens. This is a clear and clean pallet that embodies a sensation of open spaces. It suggests a new beginning, symbolizing growth and a feeling of hope. Here are the shades to watch for Pale Blue A clean and clear blue, suggesting sky, air and energy. It feels pure, breathable and induces a feeling of contentment. True Green A symobl of growth; a fresh color that goes with anything, just look outside at the grass. A flexible color. Works well with existing 2000s colors, and can be treated as classic or contemporary. A very balanced and restful shade. Turq Green A soothing and calming color. A hint of spark and invigoration to the eye. A wow color that can make you feel like youre escaping to a beautiful tropical destination. Pale Blue Green A light watercolor. Very airy; gives

Guest Instructor Jan Schrader Demystifies Mica Powder

Guest Instructor Jan Schrader Demystifies Mica Powder Imagine creating waterfalls that actually shimmer or night stars that really twinkle. Delphi is bringing in guest instructor Janet Schrader to show students at the Lansing Creativity Center how to do just that. Janet will show students how to achieve different textures, colors and effects with mica powder. Mica can be used to liven up Christmas ornaments, jewelry, mixed media projects and more. Each student will make a pendant and several samples to take home. Class will be held Thursday, Jun 24th from 6 00 pm - 9 00 pm. Glass Artist Janet Schrader lives outside Olympia WA where she has been doing glass since 1979. She has won both local and national competitions for her stained glass and jewelry designs. Always wanting to find something exciting and different to do with glass kept Janet creating and developing new designs and one-of-a-kind works of art. The same desire for something

Using Finger Fids for Foiling

Using Finger Fids for Foiling Foiling and crimping. Most glass people either hate it or love it. Its one of those jobs that just has to get done one way or the other. Foiling glass is a no brainer, and the technique can be mastered in a matter of minutes, but crimpingwell , lets just say that it has its variations. One method that I picked up from the productions shop I first worked in has always proved to be the quickest and most efficient Finger fids. Whats a finger fid? What youll need 1. Masking tape 2. Your fingers Step One Extend the thumb, index and middle fingers of the hand you usually crimp your foil with; or if you use a fid, the hand you usually hold your fid with. Step Two Cut about ten short strips of masking tape approximately 3 long. Step Three Beginning with any one of your fingers, wrap

Tiffany Art Exhibition Showcases Objects in New Ways

Tiffany Art Exhibition Showcases Objects in New Ways The Flint Institute of Arts (FIA) is currently hosting Tiffany Lamps Articles of Utility, Objects of Art - a celebration of Louis Comfort Tiffanys artistic contributions. According to the FIA website, the exhibition offers more than 40 stunning objects in an array of colors, sizes and decorative styles featured in five sections exploring themes of fabrication, design inspiration and changing lighting technologies. The show also includes tools, materials and photographs demonstrating how objects were designed and made. Tiffany is known for his stained glass windows and lamps, but he also created glass mosaics, blown glass pieces, ceramics, jewelry and metalwork. The first Tiffany Glass Company was incorporated 1885, which later became known as Tiffany Studios. His company concentrated on stained glass windows and lamps, but designed a myriad of other interior decorations. Tiffany Lamps Articles of Utility, Objects of Art Johnson and Rabiah Galleries 5.23.10 - 8.15.10 www.flintarts.org Community leaders

Celebrate America- A New Pattern from Glass Patterns Quarterly

Celebrate America- A New Pattern from Glass Patterns Quarterly Every summer around the Fourth of July, I cant help but get nostalgic about all things Americana- apple pie, front porch swings, popsicles, and cuddling up in one of grandmas quilts after a long day in the sun. Theres something so comforting about the colors and smells of the summer season. When I first saw this pattern, it brought back even more red, white and blue memories, and I thought it was worth sharing. Heres the patriotic pattern courtesy of our creativity partners at Glass Patterns Quarterly. Enjoy your summer. Design by Pat Stanley. Fabrication by Dave Burnett. Visit www.GlassPatterns.com to order a back issue, or subscribe to their magazine to get their latest designs sent right to your door.

Grind Glass Without a Glass Grinder

Grind Glass Without a Glass Grinder I love my glass grinder. In fact, I have a couple of them. But I dont grind every piece of glass that I cut. For me, its not necessary. If you can cut accurately, and by accurately I mean no bigger or smaller than your pattern, you may be able to cut down on your projects time by trying out a tool that Ive come to love and rely upon, my grinding stone. A grinding stone, or abrasive stone harks to an earlier day in the history of glass cutting, but still has its value when used in conjunction with good solid, glass scoring and breaking technique. In the pre-grinder days, these stones were de rigueur for the well equipped glazier and to put it simply, they got the job done. Learning to use the stone will take about thirty seconds of training; implementing it can save you hours.

Bedazzled Earrings: A Microwave Fusing Project

Bedazzled Earrings: A Microwave Fusing Project By Rita Levine Skill Level 2 (Adult 1-5 1 being the easiest, 5 being most difficult) Time to Complete 45 Minutes Materials Fuseworks Kiln Fuseworks Kiln Paper Fuseworks Glass Cutter Wheeled Glass Nippers Ruler Westrim pearl assortment Sterling Silver Plated Square Cabochon Mini Links - Delphi 85435 2 hat pins Earring wires Scrap fusing glass 90 COE Chain-nose pliers Round-nose pliers Instructions 1. Place white glass on a clean flat cutting surface with the smooth side of the glass facing towards you. 2. Start on an edge of the glass holding the cutter firmly in one hand. Keep the cutter perpendicular to the glass. Push the cutter gently and evenly across the glass. Decrease pressure slightly as you reach the opposite edge of the glass; lift the cutter off the glass at the end. 3. Breaking the score line can be done with breaking pliers. Hold the glass in

Teaching Tips for the Classroom

Teaching Tips for the Classroom We each have our own unique style of presentation and interaction with our attending students. That being said, I believe that there is a set of principles relating to the teaching process that might be useful to review and clarify so that they are readily available for future reference. Advance Planning You and your students will benefit if you ask them to bring either images or actual samples of their work. You will need to identify the point where each one is in his or her career so that you can work to move them forward from that point. Each will be different, and the more informed you are, the better youll be able to serve their needs. Do this as early in the class as possible, if not before. I also find it helpful to communicate via e-mail prior to starting the class with an encouraging note. Check