get started : taurus ring

Get Started

Getting started has never been easier. Select a category from the pull down or search for more information. This list is pulled from our Blog, Video, and Tips areas. Looking for products? Check out our Start-Up Kits.

Taurus 3 Ring Saw Review & Demonstration

Taurus 3 Ring Saw Review & Demonstration The Taurus Ring Saw is an excellent glass cutting tool for making multi-directional cuts. Watch as Delphi Glass store associate Danielle Wagner reviews and demonstrates how to use the Taurus 3 Ring Saw.

The Right Stuff: Make the Cut with the Taurus 3 Ring Saw

The Right Stuff: Make the Cut with the Taurus 3 Ring Saw Every artist that works with glass knows how important it is to have the right tools. Without them, we’d never be able to bring our visions to life. When cutting glass for a project, a quality cutter is essential. Gemini Saw Company has thought of what we need when cutting glass with the Taurus 3 Ring Saw. Improving on former models, this ring saw has a 1/5 HP motor and is so lightweight at just 14 lbs., you can take it anywhere. Plus, the saw part snap outs of the water bath, turning it into a hand-held saw. It has its own water so it can easily be used as a portable saw. But perhaps the best feature of all is the round diamond bit blade. It’s a 5-3/4” multi-directional blade which means you can cut seamlessly in any direction you choose. The greater blade exposure means more precise cuts.

Making Pendants and Purse Hangers with the Screen Melt Set

Making Pendants and Purse Hangers with the Screen Melt Set Im always looking for ways to use my scrap, so I decided to give the round screen melt set a try. I had mixed feelings about it, because I made the mistake of not following the fusing schedule, and tried to wing it with my pre-programmed kiln. Despite the error of my ways, I ended up with some very pretty glass using two colors of opal art glass scraps. With my screen melt complete, I used a Sharpie pen to trace out my images, and began cutting them with my Taurus 3 Ring Saw. Once I finished the shapes, I put the pendants and purse hangars back in my skutt Firebox 14 kiln, for a fire polish on the slow tack fuse. Some got bails, some wire wrapping, and the others were epoxied to purse hangers. Looking back, If you follow the Delphi directions labeled as users manual in the

Turning Photos into Glass Projects

Turning Photos into Glass Projects My husband and I recently met a spectacular couple, a genuine cowgirl and cowboy. Besides being fortunate enough to purchase a very sweet horse from them, we are proud to be able to call them our friends. While at their home I learned that her one of her best friends, her horse, had passed away the previous year. Yoda had carried her though years on the Rainbow Riders drill flag team, taken her to reigning championships, and safety along countless miles of trails. I wanted to do something special for her, and also try something new for me. I remembered seeing an article in the Delphi newsletter about making fused glass silhouettes from a photograph. While at her home I snuck a picture of her and Yoda sliding to victory, on my cell phone. I downloaded the picture and adjusted it to an appropriate size for a 10 by 10

Donna Sarafis: Basics of Fusing Part 2

Donna Sarafis: Basics of Fusing Part 2 Part 2 of a 2 part series on the basics of glass fusing. In this weeks article Donna gives advice on indispensable tools for beginner glass fusers. In the beginning, I used one larger tool, and that was a Super Star Grinder. It is still running, running, running. Others have come, and some have gone, but this one is still here. For smaller cold working projects, diamond hand pads do a nice job. The next cutting tool that I bought was a saw. My Taurus 3 Ring Saw has worked extremely well for me, and I love what I can do with it that I couldnt do before, but I worked for 2 years before I purchased this nifty item. As for cutters and breakers, I have many, but for me, the Silberschnitt breaker pliers are a must for small (1/4) strip breaking.....saves so much glass. I use both