customer service Questions on this item?
Click here to chat.
[x]

Stained Glass Start-Up Kit

Price $349.95
Your Savings: - $30.00
Your Price: $319.95 USD
Item# 6980A
In Stock Usually ships in 1 to 2 business days.

Product Features

  • Includes the tools, glass and instructions you need to help you create beautiful stained glass projects
  • Top quality tools make it easy to get fantastic results from cutting to shaping and soldering
  • A great way to try out a new craft


Product Description

exclusive Getting Started in Stained Glass is Simple with the Start-Up Kit!
We've taken some of our favorite tools and supplies for getting started in stained glass, and put them all in one ready-to-go start up kit, for maximum savings and convenience. Perfect for the beginner that wants quality tools to fit their workshop and budget. A Delphi Exclusive

Start making beautiful stained glass projects right away. Top quality tools make it easy to get fantastic results from cutting to shaping and soldering.

Kit Includes:

  • Gryphette glass grinder
  • Weller 100 watt soldering iron with built-in temperature controller
  • 8 Piece stained glass pack, 8" x 8" each
  • Supercutter dry wheel glass cutter
  • Running pliers
  • Breaker/grozer pliers
  • 60/40 Solder
  • Copper foil
  • Safety flux and brush
  • Burnisher
  • Metallic marker
  • Safety glasses
  • Pattern
Note: Product selection may vary based on availability. Photo is just one example, quality will remain the same.

Project created by artist Frankie Beckwith, vegetable panel by artist Olivia Vavroch from Delphi's Online Artist Gallery, Family Tree panel by artist Mary Ann Chicoski from Delphi's Online Artist Gallery. 

Customer Reviews

4.5 out of 5 stars
5 star  
  5
4 star
  2
3 star
  0
2 star
  0
1 star
  0
See all 7 customer reviews
Write a customer review

Product Images from Customers

Be the first to share product images with other customers
5 out of 5 stars
  •  
By on
Pros :
Cons :
Was this review helpful to you?  
2 of 7 people found this review helpful
5 out of 5 stars
  •  
By on
Pros :
Cons :
Was this review helpful to you?  
2 of 8 people found this review helpful
5 out of 5 stars
  •   Excellent!
By on
Pros : After doing a lot of research I went with this kit for my first experience doing stained glass. I added a few other items separately but this was still the best value rather than pricing out individually. Excellent customer service with all my questions prior to purchasing and videos helped with proper handling of tools and techniques.
Cons : Minimal instructions for the grinder but Easy to find online and to use!
Was this review helpful to you?  
9 of 18 people found this review helpful

See all 7 customer reviews
Related Content
Jun 24, 2010
1. Make the glass strips as wide as youd like your mosaic chunks to be. Strips about 1/2 to 3/4 usually work well. 2. Snip small pieces off the strip. Aiming your mosaic cutter straight across the strip will produce squares and rectangles. Aiming the cutter at an angle (the same angle each time you cut) will give you diamonds. A combination of aiming straight across the strip and at alternating angles will produce triangles. 3. Once youve aimed the cutter, just squeeze the handles until a piece of glass breaks off. Or, you can snip pieces off a larger piece of glass. Cut near the edge and work towards the middle. This will produce random moon shaped pieces, which you can use to fill in small areas of background. They also make nice leaves.
May 20, 2012
Reinforcement is necessary on larger windows. As a rule of thumb, a window more than three square feet should be reinforced. Either reinforcing bar or rod may be used for support. Be sure to consider this when designing the window so that the reinforcement does not intrude or compromise the design of the finished work. In either case the reinforcement is soldered to the back of the panel in one of two ways. The bar should be pre-tinned before use. You will solder the bar in several places at intersecting lines on the window. Rough the areas to be soldered on the bar with steel wool. Apply flux and coat the areas with solder. Doing this will make soldering the bar to the window much easier. Place the bar on edge and solder to the window in the predetermined areas. When using rod, a length of pre-tinned wire is first
Jun 07, 2010
1. Make sure that your pieces are clean and dry. Cut a piece of clear contact paper, remove the backing and lay it sticky-side-up over the pattern. 2. This is a perfect way to hold cut glass, globs, jewels, or marbles in place for tack soldering. As you can see in the photo, you can even move the sheet around and, if you are careful, you shouldn’t disturb the glass at all. 3. Tack solder the pieces to each other as you normally would. Then, remove the contact paper and finish soldering the front before turning the project over and soldering the back. Reprinted with permission from Stained Glass News. All rights reserved.