215 Titles Found
  • 300x200
    Tiffany Lamp Method #FacebookLive

    In this Facebook Live video Roy and Val how you how to use lamp forms, talk about glass selection as well as the creating process. Link to supplies. https://www.delphiglass.com/stained-glass-supplies/lamp-supplies/

  • 300x200
    Life Cycle Of An Order

    Have you ever wondered what happens after you place your order? Here is a look behind the scenes. #LifeCycleOfAnOrder #DelphiGlassOrders #BTS #OrderProcess

  • 300x200
    Cutting Glass Sheets Down

    Ever wonder how we cut down all the glass? Roy is here to show you how. #GlassCutting #Scoring #GlassArtist

  • 300x200
    3D Stacked Glass Trees 2 Ways #FacebookLive

    In this Facebook Live video Roy and Val will show you how to create 3d stacked trees 2 ways. Watch them cut and stack these fun trees as well as share a fusing schedule. Supplies we used today. https://www.delphiglass.com/search/FBLiveStackedTrees Firing Schedules Tack Fuse Ramp Temperature Hold Segment 1 300°F/hr (149°C) 1000°F (538°C) 20 minutes Segment 2 300°F/hr 1270°F (687°C) 5 minutes Segment 3 9999 or Full 900° F (482°C)* 1-1/2 hours * Annealing temperature for 90 COE glass is 900° F (482°C). Annealing temperature for 96 COE glass is 950° F (510°C).

  • 300x200
    What's to Love About the The Grinder Cookie

    Hear from Delphi experts a few reasons we love the The Grinder Cookie.

  • 300x200
    What's to Love About the The Grinder 2

    Hear from Delphi experts a few reasons we love the The Grinder 2.

  • 300x200
    What's to Love About the Glastar Circle Strip Cutter

    Hear from Delphi experts a few reasons we love the Glastar Circle Strip Cutter

  • 300x200
    What's to Love About the Studio Pro LED Light Pad

    Hear from Delphi experts a few reasons we love the Studio Pro LED Light Pad.

  • 300x200
    What's to Love About the Diamond Elite Bandsaw

    Hear from Delphi experts a few reasons we love the Diamond Elite Bandsaw.

  • 300x200
    Youghiogheny Cream Of The Crop Unboxing Video

    Take a look inside our Youghiogheny Cream Of The Crop Artisan Factory Glass Pack box. Buy yours here. https://bit.ly/3bgMGlT #StainedGlass #Unboxing #DelphiExclusive

  • 300x200
    Fusing Holiday Projects with Roy and Val #FacebookLive

    In this Facebook Live video Roy and Val will show you how to use pre-cuts, decals and scraps to create fun pieces to use in your own décor or to give as gifts. Perfect for a quick weekend project. Supplies we used today. Holiday Pre-Cuts and Decals: https://www.delphiglass.com/seasonal/christmas-winter-holidays/ 90 COE Dichroic Noodles: https://www.delphiglass.com/dichroic-90-coe/noodles-stringers-90-coe/ https://www.delphiglass.com/dichroic-90-coe/dichroic-accents-90-coe/ 90 COE Dichroic Frit: https://www.delphiglass.com/dichroic-90-coe/dichroic-frit-90-coe/ 96 COE Dichroic Noodles: https://www.delphiglass.com/dichroic-96-coe/dichroic-accents-96-coe/ 96 COE Dichroic Frit: https://www.delphiglass.com/dichroic-96-coe/dichroic-frit-96-coe/ Bails: https://www.delphiglass.com/jewelry-findings/bails-clasps/ Glue: https://www.delphiglass.com/mosaic-supplies/glues-chemicals/rapidfuse-all-purpose-adhesive Firing Schedules Tack/Contour Fuse Ramp Temperature Hold Segment 1 300°F/hr (149°C) 1000°F (538°C) 15 minutes Segment 2 300°F/hr 1370°F (743°C) 10 min Segment 3 9999 or Full 900° F (482°C)* 30 min * Annealing temperature for 90 COE glass is 900° F (482°C). Annealing temperature for 96 COE glass is 950° F (510°C). Fast Full Fuse - Snowflakes Ramp Temperature Hold Segment 1 9999 or Full 1500° F (815°C)* 20 min Segment 3 9999 or Full 0° F

  • 300x200
    Learn How to Use Mosaic Mesh #FacebookLive

    In this Facebook Live video Roy shows how to use mosaic mesh along with supplies and best adhesives for your project. Link to supplies we used in this video. https://bit.ly/3EIg02g

  • 300x200
    Sculptural Borosilicate Pumpkin with Val #FacebookLive

    In this Facebook Live video Val shares her process and demonstrates how to make a small sculptural pumpkin on the torch. Below are the list of supplies used and annealing schedule so you too can create your own. Supplies we used today. Tools: https://www.delphiglass.com/search/FBLivePumpkin090821 Frit: https://www.delphiglass.com/borosilicate/frit-sample-packs/ Annealing Firing Schedule: 1050°F for 20 minutes and allow to cool until in the annealer until it reaches room temperature.

  • 300x200
    Fused Holiday Night Lights #FacebookLive

    In this Facebook Live video Roy shares our process, supplies used along with firing schedules so you too can create your own. Supplies we used today. Night light supplies: https://www.delphiglass.com/dimensi.../night-light-supplies/ Glues: https://www.delphiglass.com/search/Adheasive Fall and Halloween Pre-Cuts: https://www.delphiglass.com/search/FBLivePreCuts Slumping Mold: https://www.delphiglass.com/.../night-light-mold-2-pack Firing Schedules Tack Fuse Ramp Temperature Hold Segment 1 300°F/hr (149°C) 1000°F (538°C) 15 minutes Segment 2 300°F/hr 1370°F (743°C) 10 min Segment 3 9999 or Full 900° F (482°C)* 30 min * Annealing temperature for 90 COE glass is 900° F (482°C). Annealing temperature for 96 COE glass is 950° F (510°C). Mold Slump Ramp Temperature Hold Segment 1 300°F/hr 1000°F 15 min Segment 2 300°F/hr 1250°F (677°C) 10 min Segment 3 9999 or Full 900°F* 30 min Rounded Accents Ramp Temperature Hold Segment 1 9999 or Full 1500°F 10-30 min* *depends on size of pieces

  • 300x200
    Kiln Controllers and How to Program Them #FacebookLive

    In this Facebook Live video Roy and Val talk about the various types of kiln controllers and how to program them. Firing Schedules Full Fuse Ramp Temperature Hold Segment 1 300°F/hr (149°C) 1000°F (538°C) 15 minutes Segment 2 300°F/hr 1225°F (663°C) 15 min Segment 3 300°F/hr 1450°F (788°C) 10 min Segment 4 9999 or Full 900° F (482°C)* 30 min * Annealing temperature for 90 COE glass is 900° F (482°C). Annealing temperature for 96 COE glass is 950° F (510°C). Slump Ramp Temperature Hold Segment 1 300°F/hr 1000°F 15 min Segment 2 300°F/hr 1250°F (677°C) 10 min Segment 3 9999 or Full 900°F* 30 min

  • 300x200
    Soldering Your Stained Glass Panel #FacebookLive

    In this video we are covering all things soldering. This Facebook Live video Roy and Val cover hold to hold your iron, what solder to use and more!

  • 300x200
    Finishing Your Stained Glass Project #FacebookLive

    In this video we are covering all things finishing for your stained glass project. This Facebook Live video Roy and Val cover adding zinc came from start to finish. Adding jump rings specifically how to attach and secure them. As well as showing you various patinas and finally framing using wood framing stock.

  • 300x200
    Foiling and Fitting #FacebookLive

    In this video we are covering getting the right fit for your project and foiling. Learn all about the various types of foils, thickness and backing color and why that makes a difference for your stained glass project with Roy and Val from our Facebook Live.

  • 300x200
    Getting To Know Your Grinder #FacebookLive

    Learn all about grinder basics such as maintenance, changing bits as well as tips and tricks when grinding with Roy and Val from our Facebook Live.

  • 300x200
    Cutting Hand Rolled Glass #FacebookLive

    Learn how to cut hand rolled glass from Roy and Val from our Facebook Live.


::::