Published: August 20, 2010
Learn how to program your kiln for the initial firing. Instructions on programming Jen-Ken kilns with Delphi EZ-Pro™ digital controllers. http://bit.ly/mTpgxV
Expert Tip: These videos are not meant to replace the information in your instructional manual.
DelphiGlass.com offers over 30,000 specialty supplies for glass fusing and other creative arts. To see all our glass kilns currently using the Delphi Ez-Pro kiln controller, please follow this link: http://www.delphiglass.com/search/delphi%20ez-pro?source=sm
Delphi Glass has been making it easy to be creative since 1972. If you have any questions about the products Delphi carries, or want expert advice on a craft, please ask us! Visit DelphiGlass.com online, or call our toll-free Project Helpline at 800-821-9450.
We are ready for fall and what better way to get ready than casting leaves. Roy and Val will show a variety of casting molds and how fire them and use them.
Below are the firing schedules we used in this video.
Thin Lighter Fuse
Segment rate temp hold
1 400°/hr 1000° 30 mins
2 400°/hr 1400° 15 mins
3 9999 900° 1 hour
Full Fuse with Full Molds
Segment rate temp hold
1 400°/hr 1000° 40 mins
2 400°/hr 1450° 15mins
3 9999 900° 1 hour
Slump Over Fiber Blanket
Segment rate temp hold
1 250°/hr 1000° 30 mins
2 300°/hr 1200° 20 mins
3 9999 900° 1 hour
When we need a picture, you get an unboxing! Today we are opening the Bullseye Mega 45lb Fusible Glass Pack. #BullseyeGlass #Opal #Transparent #Iridized #Collage #Fusible #KilnFormed
We are talking about slumping with drop rings. Roy and Val talk about firing schedules, glass thickness and firing schedules. They also show how to create your own custom drop ring molds.
We often get asked “How do you measure your molds for your glass?“. So we will be talking about just that! Roy and Val show a variety of molds and how we figure out what size glass you’ll need.
Take advantage of our expertise.
Glass Cutting Basics Video 1: https://rb.gy/2sdiy1
Basics of Cutting a Curve Video 2: https://rb.gy/2zrpxs
Glass Cutting Tools: https://rb.gy/hu0vow
Roy and Val as they talk about different ways to use them.
Listed below are the firing schedules we used.
Ramp / Temperature / Hold Time
Roy's Firing Schedule:
Segment 1: 300 / 1000 / 40 mins
Segment 2: 200 / 1225 / 1 hour 30 mins
Segment 3: 150 / 1470 / 12 mins
Segment 4: 9999 (FULL) / 900 / 1 hour 30 mins
Val's Firing Schedule:
Segment 1: 250 / 1000 / 1 hour
Segment 2: 200 / 1225 / 1 hour
Segment 3: 250 / 1440 / 14 mins
Segment 4: 9999 (FULL) / 900 / 1 hour 30 mins
In this video we are talking about glass painting with Glassline Pens. Roy and Val as they show you how to use them and how to incorporate them into more than just fused projects.
Have you heard of photo fusing paper? If not, Roy and Val will tell you all about it. How to use it. What is the best glass to use with it and how to fire it.
Hear from Chris from Hot Shot on what distinguishes their kilns from the rest on the market. #CoolTouchTechnology #HugYourHotShot #Kiln #Fusing #FusedGlass #Kilnformed #GlassArtist
Roy and Val show you the Hot Shot Clamshell Kiln With TAP Controller featuring cool touch technology. #FacebookLive #LearnFromDelphiExperts #Fusing #NewKiln #GlassFusing #GlassArtists #BeCreative
ezBJQmi6jXs::How-to-Program-the-Delphi-EZPro-Kiln-3Button-Controller--Delphi-Glass::How to Program the Delphi EZPro Kiln 3Button Controller Delphi Glass