customer service Questions on this item?
Click here to chat.
[x]

Stained Glass Start-Up Kit

Price $439.95
Your Savings: - $60.00
Your Price: $379.95 USD
We're sorry, discount coupons do not apply to this item.
Item# 6980A   In Stock

Product Features

  • Includes the tools and glass you need to help you create beautiful stained glass projects
  • Top quality tools make it easy to get fantastic results from cutting to shaping and soldering
  • A great way to try out a new craft


Product Description

exclusive Getting Started in Stained Glass is Simple with the Start-Up Kit!
We've taken some of our favorite tools and supplies for getting started in stained glass, and put them all in one ready-to-go start up kit, for maximum savings and convenience. Perfect for the beginner that wants quality tools to fit their workshop and budget. A Delphi Exclusive

Start making beautiful stained glass projects right away. Top quality tools make it easy to get fantastic results from cutting to shaping and soldering.

Kit Includes:

  • Gryphette glass grinder
  • Weller 100 watt soldering iron with built-in temperature controller
  • 6 Piece stained glass pack, 6" x 6" each
  • Supercutter dry wheel glass cutter
  • Running pliers
  • Breaker/grozer pliers
  • 60/40 Solder
  • Copper foil
  • Safety flux and brush
  • Burnisher
  • Metallic marker
  • Safety glasses
  • Pattern
Note: Product selection may vary based on availability. Photo is just one example, quality will remain the same.

Customer Reviews

4.7 out of 5 stars
5 star  
  7
4 star
  3
3 star
  0
2 star
  0
1 star
  0
See all 10 customer reviews
Write a customer review

Product Images from Customers

Be the first to share product images with other customers
5 out of 5 stars
  •  
By on
Pros :
Cons :
Was this review helpful to you?  
4 out of 5 stars
  •   Just go for it!
By on
Pros : Nearly everything you need to start up the hobby
Cons : Replaced the soldering iron for a temperature controlled one
Other Thoughts : There's always more equipment/tools to purchase for stained glass, it seems but it's FUN to shop for! I highly recommend purchasing this if you're looking to dive into stained glass.
Was this review helpful to you?  
8 of 9 people found this review helpful
5 out of 5 stars
  •   Go For It
By on
Pros : As a newbie, this was a great kit for getting started
Cons :
Was this review helpful to you?  
9 of 18 people found this review helpful

See all 10 customer reviews
Related Content
Jun 07, 2010
1. Make sure that your pieces are clean and dry. Cut a piece of clear contact paper, remove the backing and lay it sticky-side-up over the pattern. 2. This is a perfect way to hold cut glass, globs, jewels, or marbles in place for tack soldering. As you can see in the photo, you can even move the sheet around and, if you are careful, you shouldn’t disturb the glass at all. 3. Tack solder the pieces to each other as you normally would. Then, remove the contact paper and finish soldering the front before turning the project over and soldering the back. Reprinted with permission from Stained Glass News. All rights reserved.
May 20, 2012
Reinforcement is necessary on larger windows. As a rule of thumb, a window more than three square feet should be reinforced. Either reinforcing bar or rod may be used for support. Be sure to consider this when designing the window so that the reinforcement does not intrude or compromise the design of the finished work. In either case the reinforcement is soldered to the back of the panel in one of two ways. The bar should be pre-tinned before use. You will solder the bar in several places at intersecting lines on the window. Rough the areas to be soldered on the bar with steel wool. Apply flux and coat the areas with solder. Doing this will make soldering the bar to the window much easier. Place the bar on edge and solder to the window in the predetermined areas. When using rod, a length of pre-tinned wire is first
May 05, 2010
I have some questions about Lead-Free Solder. Does it tarnish over time? Can you use patina on it? Does it flow like regular solder? Is it better than regular solder? We are sure that you arent the only one with these questions. Lets start with the question of whether or not its better than regular solder. Since the harm from lead is caused by ingestion, any project that will come in contact with food or food containers should be made with lead-free solder. In addition, anything that is handled, like jewelry or kaleidoscopes, should be made with lead-free solder. Hands have a terrible habit of making it into the mouth before they get washed. So, yes it is better than regular solder in these situations. As far as working with solder, you should be diligent about cleaning your hands after touching any solder. Dont eat, drink, smoke, or do anything

4 Stars and Above

Soldering Starter Kit
$129.95 $109.95
16% off
Premium Stained Glass Start-Up Kit
$499.95 $429.95
15% off
Deluxe Stained Glass Tool Kit
$277.95 $239.95
$38.00 off
Lead Upgrade Kit
$209.95 $169.95
20% off

You may also like

The Grinder
$399.95 $359.95
$40.00 off
Ultimate Stained Glass Start-Up Kit
$629.95 $539.95
15% off
Diamond Elite Band Saw
$739.95 $599.95
19% off
Kokomo Colt Case Glass Pack
$849.95 $699.95
18% off
Breda Glass Nippers
$119.95 $99.95
17% off
Taurus 3 Ring Saw
$819.95 $709.95
$110.00 off
Ultimate Cutters Mate Starter Kit
$599.95 $549.95
$50.00 off