1. Clean glass and cut into rectangles. Arrange one clear piece on top of one white piece. Cut a wavy blue opal piece of glass for bottom of water.

2. Trim black fish decals to fit tropical fish pre-cuts. Soak in warm water for 30 seconds. Slowly place decal onto pre-cuts, making sure no folding or bubbles occur and let dry.

3. Arrange fish precuts onto base glass. Use Glastac to glue firesticks and frit balls in place prior to fusing.

4. Allow glue to dry thoroughly and fire using the tack fuse schedule provided.

5. Remove glass nightlight from the kiln when cool.

6. Using E6000 or silicone adhesive, attach Screw-On Night Light Clip to the back of your glass.