Pros
They are easy to use and manipulate to whatever size I want.

Cons
You really are none that I can see.

Other Thoughts
This was a good buy and I would highly recommend them.

Pros
This product always strengthens my projects. Doesn't pull away like foil. Lasts a long time.

Cons

Other Thoughts

Pros
If you use MR97 and the proper fill (don't overfill) this mold yields lovely pendants and earrings.

Cons
Does not work well with kiln wash. Use MR 97, but I find this to be true for all the molds with posts.

Other Thoughts

Pros
Good sturdy paper. I was easily able to get two full fuses out of each sheet.

Cons
The roll is a pain in the neck, especially if you have a small studio like I do. The paper curls (this is a major problem is you have small light weight pieces) and has to be worked a little before it will lie flat in the kiln. I started pre-cutting sheets, laying them upside down on a flat surface and weighting them to get the curl out. Although I will buy the paper again I won't buy the roll again.

Other Thoughts
The rolls could be a little more user friendly, like put measure marks on the back and a serrated edge on the box.

Pros
All of the pieces are just beautiful They exceeded my expectations. Very nice variety.

Cons
None

Other Thoughts
I am just beginning to use stained glass in my mosaics and this is a great pack to start with. In the pack I received the lavender piece is a deep, beautiful purple.

Pros
This is the best flux for stained glass. It stays put on your foil and zinc. Love it!

Cons
None

Other Thoughts

Pros
What was I waiting for? This is sooo simple to use and makes the best circles in such a short amount of time. I'm planning whole panels filled with circle motifs now--I used to have to cut them by hand or use my saw--so slow!

Cons
Pricey but soooooo worth it!

Other Thoughts
Wish it came with instructions (weird how so few glass supplies actually come with any instruction manuals--or if they do a lot of them are very unclear...) but I found out how to use it from Delphi videos.

Pros
Goes together well in any pattern I need. Can be used for back splash, cutting surface etc.

Cons

Other Thoughts
We are using some under our mosaic panels as we work to catch any stray shards--what an improvement--so many fewer nicks and cuts! (We use large clear plastic tubs with clear lids taped half-on to actually cut/nip the glass in, then use the grid surface to lay out the panel on.) Makes for a neater, safer glass shop!

Pros
Loved the first ones I ordered so much, I bought a bunch more in all the colors offered!

Cons
Use extra care when grinding edges(use finest bit) and soldering(use mirror back sealant) Well worth the extra effort!

Other Thoughts

Pros
I got the whole line of these tiles for doing mosaic work--we love them! The colors are beautiful and the textured pattern in each tile is a whole world in itself closeup and adds a lustrous quality to my work. The patterns are very organic as well, so you can use these for trees, leaves, etc. They're useful in any work that is not meant to be see-through, but they're mirror-like finish makes them add pop and life to your work.

Cons
Back finish needs a bit of extra care when grinding edges (use FINE bit) and soldering (use Mirror sealant)

Other Thoughts
I also highly recommend the Van Gogh sheet glass--just remember to use a fine diamond bit when you sand edges and use mirror backing spray so the flux doesn't damage the tiles. It's well worth the extra effort to get the rich, elegant feel from this glass in your work.

Pros
Makes my color choices so much easier, and it fits nicely in my smaller studio. Works great!

Cons

Other Thoughts
I also use it to lay my cut pieces together on so I can get a peek at how the finished panel will look in sunlight--only works for small panels, though.

Pros
Love to use this to add needed strength in larger copper foil panels. Easy to use.

Cons

Other Thoughts

Pros
Works great when you turn up the solder temp and take your time to make smooth lines. Healthier alternative to lead when you've got kids around.

Cons
Costs more than lead solder.

Other Thoughts

Pros
Handy to have around when you want a quick fix for burrs etc and don't want or need to use the big grinder--just remember to use it with water!

Cons

Other Thoughts

Pros
Keeps glass organized and free from chipping or scratching. Two to three sheets of 3mm glass fit between each stake.

Cons
Some of the holes are hard to inset metal dowels

Other Thoughts
I bought a second one.