Shop By Category
Final Hours - Save on the Taurus 3 and Max 10
community : product reviews
 
Product Reviews
1
...
497
498
499
...
605
Ponytail Holders - 5 Pack by Catharyn on February 19, 2011 4 stars
Pros
Sturdy, quality, easy to use
Cons
Price
Other Thoughts
I really enjoy these. I fastened a dichro cab with E6000 two weeks ago, been wearing it ever since and it's held up nicely. I too wish they came in larger amounts and wish they were a tad cheaper.

Beginning Fritography DVD by Classical on February 18, 2011 4 stars
Pros
DVD is very thorough and enjoyable
Cons
When the same action is repeated over and over, such as spreading frit, we did not need to see every application
Other Thoughts

Fireworks Mastering The Glass Bead - DVD by Deborah M on February 17, 2011 4 stars
Pros
Very clear, concise and the video is photographed so you can really see what is happening on the mandrel. It's a good basic introduction.
Cons
Other Thoughts

Spectrum Crystal Opal by [email protected] on February 16, 2011 5 stars
Pros
I use this glass to print silk screened images. It is flat as paper and when lit from behind makes a nice even white glow.
Cons
would like it if the price was lower, other than that it is perfect
Other Thoughts

Large Celtic Cross Bevel Cluster by airecastle on February 14, 2011 5 stars
Pros
Quality bevel kit, easy to use, fits well, not difficult.
Cons
No Cons
Other Thoughts
I use a Sun-Burst background with lead-lines that run through the square tips of the ends of the cross, plus other Sun-Burst lines to balance the piece and create "pop", as home interior decorators like to say. Add a row of 1" rectangular bevels and another row of complimentary color & texture glass and you have a mid-sized masterpiece. This is a great project to create as a gift.

Super Unobtainium Borocolour 1/4 lb Bundle - 33 COE by giapet on February 12, 2011 5 stars
Pros
love this color
Cons
prices here are always HIGHER than everywhere else.
Other Thoughts

3/4" Ultra Fine Twofers Grinder Bits - 2 Pack by pcwilliams on February 8, 2011 5 stars
Pros
Very good for grinding dichroic. Doesn't chip the dichroic. Also great for mosaics and for fusing as other grinder bits chip the glass.
Cons
None.
Other Thoughts

Pink with White Core Filigrana Single Rod - 104 COE by Emma-Jane F on February 8, 2011 5 stars
Pros
Just started out in flameworking and this rod is easy to work and I got great results with the basic starter kit equipment.
Cons
None that I've found so far.
Other Thoughts

1/4 Lb Decal Pattern Dichroic Combo Scrap - 96 COE by twilliford on February 5, 2011 5 stars
Pros
Larger pieces than I expected- great when you need variety
Cons
Other Thoughts

Gryphette Grinder by Amie J on February 4, 2011 5 stars
Pros
Easy to assemble, easy to use
Cons
none
Other Thoughts
A great little grinder for the money. Seems well made and was easy to assemble. The motor is strong and makes easy work of grinding imperfections out of my fused glass pieces. I have no problem holding even the smallest jewelry pieces I make up to the grinding bit -- smooth, rotating action!

Jewelry Twofers Grinder Bits - 2 Pack by Amie J on February 4, 2011 5 stars
Pros
Easy to use, easy to install, perfectly smooth groove
Cons
none
Other Thoughts
I bought these for my Gryphette Grinder so I could make grooves in my fused glass pendants for wire wrapping. These work perfect!

5/64" Round U Hobby Lead Came – 15 lb Spool by Di4134 on February 4, 2011 5 stars
Pros
I really like this on a roll. I have it on a spool holder on my work bench. I would recommend this to anyone.
Cons
I wish this product came in a non-lead alternative for other art projects
Other Thoughts

Spectrum Clear Artique by xrgt on February 2, 2011 5 stars
Pros
looks like thin fishing lines thrown on a flat surface and glass poured over it simulating the roweling effect of antique glass. Have used it for several windows and cabinets as it allows someone to see moderately clearly through it without being too distorting. Yet it gives the look looks of old antique glass... A nice effect for background glass to the pattern in windows and cabinets. The surface look of the striations still gives a visual 'barrier'. Like others have said, it cuts easily, breaks along scribe-line easily. It also grinds easily. I've not tried to cut it with a saw yet, but find no reason it should not cut well.
Cons
So far I've found none.. I have used it on 4 major window projects and two cabinet projects.
Other Thoughts

Studio Pro Band Saw Replacement Blade by pgcrawley on February 2, 2011 5 stars
Pros
Have had my 3000XL for 5 years now and have used this blade consistently except for one time! The cheaper blade lasted about 1/4 as long as the premium blade. I have never had a premium blade break and by the time I am finished with it, there isn't any coating on it!
Cons
Wish it lasted longer!
Other Thoughts

Diamond Tech Core Drill Bit Set by Keith P on February 1, 2011 4 stars
Pros
I have used the smallest one and have not had any bad issues. Cuts well.
Cons
Glass core can be a little difficult to remove from bit.
Other Thoughts

Glassline Pen Assortment by tanyabrennan (top contributor) on January 31, 2011 5 stars
Pros
Glassline pens are great to use for fine detail. Recommended to fire at 1500, however, I have also fired them as low as 1375 and I have been pleased. This kit has so many great colors. I purchased the kit for the colors you can not purchase individually (for me, brown & grey). However, I ended up loving some of the others that I had not considered. The price is also better for the kit and a set of tips are included.
Cons
Some of the colors can be thicker and therefore more difficult to apply. I find that frustrating. Be sure to shake the colors VERY well before using. They can be very watery also. I always test on a piece of paper before applying to my work. Also, check your piece before firing to look for smudges & cracking if applied to thick. These can be corrected by "scratching" them off with a toothpick. It is easier than trying to wipe off small mistakes when the glassline is still wet.
Other Thoughts
I suggest firing a tester with all of the colors on it to use for future review. It is very helpful to see the "true" color after firing. I would also suggest purchasing extra tips with this kit. I love working with the tips for precision. I "plug" my tips with straight pins with the colored balls on them. Great way to keep them sealed with the tips still on. I clean my tips by letting them dry out, scraping them out with toothpick and then soaking in nail polish remover to get out the final residue. Works great!

1
...
497
498
499
...
605