Free Honeycomb Project Guide

  • Simple shapes are quick and easy to cut
  • Create with color and light! Glass shows radiant color when illuminated

  • 8" x 16" Kokomo Yellow Transparent Flemish (#K216LLF-MD)
  • 8" x 16" Kokomo Light Amber Transparent Flemish (#K182F-MD)
  • 8" x 16" Kokomo Pale Amber Transparent Flemish (#K183F-MD)
  • Bumble Bee Fusible Pre-Cut - 90 COE (#30315)
  • Ultimate Fuser's Glass Cutting Station (#52408)
  • Mastercraft 60/40 solder (#3000)
  • 7/32” copper backed foil – 1.0mm (#42825)
  • Super Brite Copper Patina (#5506)
  • Basic stained glass tools
Step 1
Step 2
1. Cut the glass into hexagons using the provided pattern.
2. Arrange the hexagon shapes into the size and shape of your choosing.
Delphi Tip: Take a picture of your pattern so that it's easier to put back into place once foiled.
Step 3
Step 4
3. Foil each piece using a copper backed foil.
4. Arrange the now foiled shapes back into your original pattern. Apply flux to the area before soldering.
Step 5
Step 6
5. Solder all joints and edges on both sides. Tin all outer edges.
6. Clean off all residual flux. Using a brush, work the copper patina over the solder.
Step 7
Step 8
7. Tack solder the bee.
Delphi Tip: The bee and the honeycomb panel should be patinated separately before tack soldering.This ensures all solder lines are fully patinated.
8. Enjoy.