Where do you see the Art Glass Industry and Oceanside Glass in 10 years?

We are ready for fall and what better way to get ready than casting leaves. Roy and Val will show a variety of casting molds and how fire them and use them. Below are the firing schedules we used in this video. Thin Lighter Fuse Segment rate temp hold 1 400°/hr 1000° 30 mins 2 400°/hr 1400° 15 mins 3 9999 900° 1 hour Full Fuse with Full Molds Segment rate temp hold 1 400°/hr 1000° 40 mins 2 400°/hr 1450° 15mins 3 9999 900° 1 hour Slump Over Fiber Blanket Segment rate temp hold 1 250°/hr 1000° 30 mins 2 300°/hr 1200° 20 mins 3 9999 900° 1 hour

Watch a glass showroom tour with Val and Roy who will show you about the different manufacturers, types of fusible glass.

When we need a picture, you get an unboxing! Today we are opening the Bullseye Mega 45lb Fusible Glass Pack. #BullseyeGlass #Opal #Transparent #Iridized #Collage #Fusible #KilnFormed

We are talking about slumping with drop rings. Roy and Val talk about firing schedules, glass thickness and firing schedules. They also show how to create your own custom drop ring molds.

We are talking about draping glass over fusing forms. Learn how to measure, create a base and more!

Shop our showroom for all the colors. https://www.delphiglass.com/bullseye-90-coe-glass/delphi-superior-glass-90-coe/

See how tRoy and Val comb designs in glass when the temperature is approximately 1650 - 1750 degrees Fahrenheit.

Shop our showroom. https://www.delphiglass.com/bullseye-90-coe-glass/delphi-superior-glass-90-coe/

We often get asked “How do you measure your molds for your glass?“. So we will be talking about just that! Roy and Val show a variety of molds and how we figure out what size glass you’ll need.

Take advantage of our expertise. Glass Cutting Basics Video 1: https://rb.gy/2sdiy1 Basics of Cutting a Curve Video 2: https://rb.gy/2zrpxs Glass Cutting Tools: https://rb.gy/hu0vow

Roy and Val as they talk about different ways to use them. Listed below are the firing schedules we used. Ramp / Temperature / Hold Time Roy's Firing Schedule: Segment 1: 300 / 1000 / 40 mins Segment 2: 200 / 1225 / 1 hour 30 mins Segment 3: 150 / 1470 / 12 mins Segment 4: 9999 (FULL) / 900 / 1 hour 30 mins Val's Firing Schedule: Segment 1: 250 / 1000 / 1 hour Segment 2: 200 / 1225 / 1 hour Segment 3: 250 / 1440 / 14 mins Segment 4: 9999 (FULL) / 900 / 1 hour 30 mins

In this video we are talking about glass painting with Glassline Pens. Roy and Val as they show you how to use them and how to incorporate them into more than just fused projects.

Roy and Val will show you how to cut it and use it for both fusing and stained glass.

In this video we are talking about how to use color slide to add colorful imagery to your artwork.

Have you heard of photo fusing paper? If not, Roy and Val will tell you all about it. How to use it. What is the best glass to use with it and how to fire it.

Hear from Chris from Hot Shot on what distinguishes their kilns from the rest on the market. #CoolTouchTechnology #HugYourHotShot #Kiln #Fusing #FusedGlass #Kilnformed #GlassArtist

Roy and Val show you the Hot Shot Clamshell Kiln With TAP Controller featuring cool touch technology. #FacebookLive #LearnFromDelphiExperts #Fusing #NewKiln #GlassFusing #GlassArtists #BeCreative

Look at this beauty!

Hot off the lehr - Oceanside Emerald Green Opal - 96 COE Video courtesy of Oceanside Glass & Tile.

Do you enjoy your neighbors flowers but don’t have a green thumb yourself? Then this video is for you. Roy and Val are showing you how to create your own glass flowers using Creative Paradise molds. The Fused Glass Flowers Book: https://www.delphiglass.com/books-dvds-software/fusing-books/fused-glass-flowers Hardware Kit: https://www.delphiglass.com/fusing-molds/flower-molds/fused-glass-flowers-hardware-kit Glass Casting Video: https://www.facebook.com/delphiglass/videos/806217927383991 Vitrigraph Video: https://www.facebook.com/delphiglass/videos/297262942455747