Delphi Glass is providing this feature as a convenience to our customers who want to save items to their Amazon Wish List. All Wish List items are still ordered through DelphiGlass.com. You must have an Amazon account to use this feature.
Fires fusible and dichroic glass in as little as 3 minutes
Safe and simple to use
2-3/4" firing chamber
Overall dimensions 4-3/4" dia x 3-1/4" high
Use with any 800-1200 watt microwave with metal interior
Frequently Bought Together
This item: Fuseworks Microwave Kiln by Diamond Tech
Fuse Glass Right in Your Microwave!
Beginners can get started quickly and easily. One of the most affordable kilns on the market, with Fuseworks you'll be making gorgeous glass jewelry, bottle stoppers, drawer knobs and embellishments in no time!
Now you can create custom kiln-fired art without having to invest in a large kiln. Best of all, it works extremely fast. The 2-3/4" internal fusing platform is perfect for fusing jewelry pieces or embellishments in as little as 3 minutes. Lightweight and compact for easy portability and storage. Includes complete instructions. For use with an 800-1200 watt microwave with metal interior. Results may vary based on microwave.
Fuseworks Kiln has been tested safe for use in a household microwave. Manufacturer recommends cleaning the microwave after each use and to begin testing with a shorter time, following manufacturer instructions.
Project images courtesy of Diamond Tech.
Step-By-Step: Dichroic Bracelet Made in the Fuseworks Microwave Kiln
Using Wheeled Glass Nippers #2039, nip dichroic and clear glass into squares.
Cut a piece of Thin Fire paper #7405 to cover the base of kiln.
Place dichroic glass squares, dichroic side up, on paper. Position a clear square on top of each. Cover with lid and fire. Repeat until you have 11 fused cabochons.
Using Triolyse Adhesive #77201, glue cabochons on bracelet disks. Allow to cure.
Pros : For a project I needed opal glass nuggets from 10 to 15 mm (approximately) and the ready-made were not quite good - limited colors do not allow to create "shadowed" realistic effect. With this small kiln I solved my problem easily. Allows to make 3-5 nuggets at a time even with the simplest microwave I used - 650 watts or so.
It's simple, handy, inexpensive and allows to create some small but interesting details for a stained glass project if you need something like a bud or a bee and do not want (or there is just no space) the soldered lines.
Pros : Good for firing small pendants and earrings. Much cheaper than a regular kiln. Also, you do not need a special area for a real kiln. It's also quick and relatively easy once you work out the best way to use it.
Cons : The instructions are poor! They only mention firing on full power. I have found this does not work well. I ruined a lot of glass to start with. I have found that 3-4 minutes on 50% power to slowly warm up the kiln and then 3-4 minutes on 75% power works well. This also depends on whether you are fusing 2 or 3 pieces of glass. It is recommended not to fuse more than 6mm in total. It is also fine to have a quick peek to check how the fusing is going. Some instructions tell you not to peek under any circumstances. The other problem I had initially was that the paper I was provided left the piece with sharp edges and a rough bottom. Now that I use Bullseye thinfire paper I have no problems with this.
Other Thoughts : More detailed instructions would have been really useful. Hope all this helps new people to fusing without the enormous amount of frustrations that I have experienced.
Create this beautiful and simple fused glass pendant right in your home. Just use your Fuseworks microwave kiln and glass. Follow the link below to download and print the free directions directly from your computer screen. Project courtesy of Diamond Tech, design by Jeanne Baruth. Download Free Project Guide Viewing this file requires the use of the Adobe Acrobat Reader. If you do not have Adobe on your system, you may download Adobe Reader free from their website. Many of the supplies you need are available right here at Delphi Glass. See project guide for full list of suggested supplies.
Fusing with Fused Art Decals Create beautiful detailed work like this Ming Fling bracelet by Jeanne Baruth. Fused Art Decals is the easy way to add colorful pictures and designs. Made to work with the Fuseworks Microwave Kiln, they can be fired at very high temperatures. Download the project guide to learn more. Download Instructional Guide Viewing these downloadable files, requires the use of the free Adobe Acrobat Reader. If you do not have the free Adobe Acrobat Reader on your system, you may download it from the Adobe web site.
Heres our list of 5 Favorite New Items from the September 2013 edition of Stained Glass News As always we look forward to receiving our quarterly issue of Stained Glass News. It is always packed with inspiration and highlights of the newest items available for art glass creations. Let us walk you through these exciting new items and see how they can add new dimension and style to your work today. 1. Dichroic Extract Its like glitter, all grown up. Add dichroic to your projects in ways youve previously only dreamed of with this fantastic new product. Its all the dazzle of dichroic, without a backing to limit your applications. With no COE, you can paint it on, sprinkle it, even pick it up in flameworked and blown glass projects. Dichroic Extract is available in all your favorite colors, plus fun sample sets to get started. 2. Fuseworks Gift