Fuseworks Microwave Kiln

$179.95 USD
We're sorry, discount coupons do not apply to this item.
Only 11 left in stock - order soon.
Item# 424849   In Stock

Product Features

  • Fires fusible and dichroic glass in as little as 3 minutes
  • Safe and simple to use
  • 2-3/4" firing chamber
  • Overall dimensions 4-1/2" dia x 3-1/4" high
  • Use with any 800-1200 watt microwave with metal interior
  • Create fun fused art in this mini kiln; kiln is not designed for use with slumping or casting molds


Product Description

Fuse Glass Right in Your Microwave!
Beginners can get started quickly and easily. One of the most affordable kilns on the market, with Fuseworks you'll be making gorgeous glass jewelry, bottle stoppers, drawer knobs and embellishments in no time!

Now you can create custom kiln-fired art without having to invest in a large kiln. Best of all, it works extremely fast. The 2-3/4" internal fusing platform is perfect for fusing jewelry pieces or embellishments in as little as 3 minutes. Lightweight and compact for easy portability and storage. Includes complete instructions. For use with an 800-1200 watt microwave with metal interior. Results may vary based on microwave.

Fuseworks Kiln has been tested safe for use in a household microwave. Manufacturer recommends cleaning the microwave after each use and to begin testing with a shorter time, following manufacturer instructions.

Create fun fused art in this mini kiln; kiln is not designed for use with slumping or casting molds.
 

Step-By-Step: Dichroic Bracelet Made in the Fuseworks Microwave Kiln

 
step 1
Step 1. Using Wheeled Glass Nippers #2039, nip dichroic and clear glass into squares.
 
step 2
Step 2. Cut a piece of Thin Fire paper #7405 to cover the base of kiln.
 
step 3
Step 3: Place dichroic glass squares, dichroic side up, on paper. Position a clear square on top of each. Cover with lid and fire. Repeat until you have 11 fused cabochons.
 
step 4
Step 4. Using adhesive, glue cabochons on bracelet disks. Allow to cure.
 
step 5
Enjoy!
 
 
Project images courtesy of Diamond Tech.
 

Customers Who Bought This Item Also Bought

Product Details

  • Power requirements: For use with an 800-1200 watt microwave with metal interior.
  • Temperature controller: N/A
  • Firing chamber: 2-3/4"
  • Shipping weight: 4 lb.
  • Manufacturer: Fuseworks

Customer Reviews

3.8 out of 5 stars
5 star  
  7
4 star
  1
3 star
  1
2 star
  1
1 star
  2
See all 12 customer reviews
Write a customer review

Product Images from Customers

Be the first to share product images with other customers
4 out of 5 stars
  •   wishing for molds
By on
Pros : I love this little kiln since I mostly wanted to make "eyes" and nuggets of any color. Works beautifully with the thin fire paper. Have been having a ball with it.
Cons : Now wishing I had the $ to buy a larger kiln since there aren't any molds. Didn't care for the fiber paper or instructions.
Was this review helpful to you?  
12 of 19 people found this review helpful
5 out of 5 stars
  •   It's doings what's it supposed to do
By on
Pros : For a project I needed opal glass nuggets from 10 to 15 mm (approximately) and the ready-made were not quite good - limited colors do not allow to create "shadowed" realistic effect. With this small kiln I solved my problem easily. Allows to make 3-5 nuggets at a time even with the simplest microwave I used - 650 watts or so. It's simple, handy, inexpensive and allows to create some small but interesting details for a stained glass project if you need something like a bud or a bee and do not want (or there is just no space) the soldered lines.
Cons : None so far.
Was this review helpful to you?  
10 of 16 people found this review helpful
3 out of 5 stars
  •   Instructions Seriously Lacking!
By on
Pros : Good for firing small pendants and earrings. Much cheaper than a regular kiln. Also, you do not need a special area for a real kiln. It's also quick and relatively easy once you work out the best way to use it.
Cons : The instructions are poor! They only mention firing on full power. I have found this does not work well. I ruined a lot of glass to start with. I have found that 3-4 minutes on 50% power to slowly warm up the kiln and then 3-4 minutes on 75% power works well. This also depends on whether you are fusing 2 or 3 pieces of glass. It is recommended not to fuse more than 6mm in total. It is also fine to have a quick peek to check how the fusing is going. Some instructions tell you not to peek under any circumstances. The other problem I had initially was that the paper I was provided left the piece with sharp edges and a rough bottom. Now that I use Bullseye thinfire paper I have no problems with this.
Other Thoughts : More detailed instructions would have been really useful. Hope all this helps new people to fusing without the enormous amount of frustrations that I have experienced.
Was this review helpful to you?  
33 of 39 people found this review helpful

See all 12 customer reviews
Related Content
Jul 28, 2010
No oneknowstheexactorigins of glass fusing although there is evidence that the Egyptians were familiar withrudimentary techniques. The Romans however arenoted by scholars for developingrefined glass fusing skills. Although technology has changed the way modern glass fuserswork,the technique isessentially the same as those developed by the Romans centuries ago. The basic technique involvesstacking two or morelayers of fusible glass, which are then placed in a kiln and gradually heated to between 1450-1500 Fahrenheit.At these temperatures the layers of glass fuse, or melt together and become one. Unfortunately, glass kilnsare large andexpensive,whichkeeps most Hobbyists from pursuing this art form. Now there are new kiln options, including theThe Fuseworks Microwave Kiln. This device works in most household microwaves and can fuse glass in about 3 minutes. Here are some common questions we get on fusing in this modern-day kiln. The following are Q A complied by Diamond Tech, the manufacturer of Fuseworks
Sep 13, 2013
Heres our list of 5 Favorite New Items from the September 2013 edition of Stained Glass News As always we look forward to receiving our quarterly issue of Stained Glass News. It is always packed with inspiration and highlights of the newest items available for art glass creations. Let us walk you through these exciting new items and see how they can add new dimension and style to your work today. 1. Dichroic Extract Its like glitter, all grown up. Add dichroic to your projects in ways youve previously only dreamed of with this fantastic new product. Its all the dazzle of dichroic, without a backing to limit your applications. With no COE, you can paint it on, sprinkle it, even pick it up in flameworked and blown glass projects. Dichroic Extract is available in all your favorite colors, plus fun sample sets to get started. 2. Fuseworks Gift