Profile - Delphi Gallery

spraydm's Profile

Recent Activity

12" Full Kiln Shelf

Item# 7494

2 of 4 found the following review helpful:

Smooth, even surface, July 30, 2013 5 stars

Pros
I bought one of these to replace the shelf that came with my kiln - which was uneven. This one was smooth and even.

Cons
None

Studio Pro Brass Glass Cutter

Item# 425654

5 of 6 found the following review helpful:

Smooth cutter, July 30, 2013 5 stars

Pros
This is a very smooth cutter, and is really great for free-form cutting.

Cons
I had to get used to the spring action - press down before starting your cut.

Bullseye GlasTac Firing Glue - 4 oz

Item# B8234

5 of 9 found the following review helpful:

Dries clear, no residue, July 30, 2013 4 stars

Pros
This glue dries nice and clear and leave absolutely no residue. The slow drying allows you to reposition, which can be critical to your design.

Cons
It does dry slowly, so you have to leave it and come back much later before trying to move it.

Silberschnitt Pro Circle Cutter

Item# 710511

6 of 8 found the following review helpful:

Cuts perfect circles, July 30, 2013 5 stars

Pros
This is easy to use and makes GREAT cuts. Very smooth to operate.

Cons
You just have to make sure the center suction is firmly sealed to the glass, so always check that before starting your cut.

Easy-Cut Lens Cutter

Item# 7991

10 of 13 found the following review helpful:

Great suppldier support, July 30, 2013 4 stars

Pros
I bought this and the handle broke. Delphi put me in touch with the supplier and they sent a replacement immediately. I haven't had any trouble since. Overall a very good product - I don't see anything better on the market.

Cons
The blade does slip from time to time, but as others here said, just check it before each cut to make sure it is tightened. Add a non-slip surface to hold the glass still - that's a no-brainer. It cuts circles well, but the smaller you go the harder it is to get a clean cut. Use breaking pliers to remove uneven bits, rather than a nipper.

Heart Fusible Pre-Cut Assortment 6 Pack - 90 COE

Item# 30308

3 of 3 found the following review helpful:

Perfect shapes, July 30, 2013 5 stars

Pros
I had some molds and used to try to get nice hearts - with mixed results. I like buying these because they are thinner than the mold ones and they keep their perfect shapes in a tack fuse. They may cost more, but I lost a lot of glass in the imperfect mold process.

Cons
Limited in color options, blue would be a nice addition. Would love to see dichroic and iridescent.

Ponytail Holders - 5 Pack

Item# 85459

1 of 2 found the following review helpful:

Sturdy and beautiful, July 30, 2013 5 stars

Pros
Everyone loves how my glass looks on these sturdy, beautiful holders. I use E6000 glue and they have never come off. Delphi is the only place I can find them.

Cons
None

Stainless Steel Versatile Slumping Mold

Item# 4269

4 of 5 found the following review helpful:

Indispensible, July 30, 2013 5 stars

Pros
I use these to slump barrettes, and I make them in several sizes. Each size has a different curve, and although it's pretty easy to adjust, it was time consuming. To save time I bought extras and set them up for the various sizes, because they aren't that expensive. Time is money! I also use Thinfire Shelf Paper rather than kiln wash.

Cons
None

1" Hearts and Stars Casting Mold

Item# 80658

6 of 7 found the following review helpful:

stars are a bust, August 11, 2012 2 stars

Pros
The hearts come out fine, but the stars are a mess. That makes 1/2 of this mold useless.

Cons

Gallery Home (all items)

Profile

Donna's info

joined:	Oct 15, 2011
location:	Springboro, OH US
display name:	spraydm

	II.2 Complete Blade and Parts Kit Quantity: 2
	Mini Beetle Bits Cutting System Quantity: 2
	Stars Ornament Casting Mold Quantity: 2
	10" x 16" Wissmach Twilight Opal Streaky Quantity: 3
	7/32" Delphi Superior Silver Backed Foil - 1.25 Mil Quantity: 2