Product Reviews
Pros
easy to use, excellent print quality, easy to transfer if you slide the decal off the backer directly onto the glass.
Cons
poor directions, especially concerning the printer options and firing schedule (none actually provided)
Other Thoughts
So after testing this with copy toner from Kinkos/FedEx and Office Max (don't bother, they don't contain the iron oxide needed), the trying an inkjet MICR which would load into my printer so never printed, I bought a new laser printer.
Printer: Canon Laser Printer (ImageCLASS LBP6030w) and the compatible MICR cartridge (for check printing because it contains a high percentage of iron oxide). I did find a website that mentioned that any Canon or HP laser printer would work as long as it does not have the capacity to print in color (they use HP Laserjet P2035). I have not tested the toner cartridge that came with my Canon yet.
Firing Schedule: I have a Paragon CS19 and JenKen 15/6 and have used the below schedule in both.
R1 at 100F, hold at 200F for 30 minutes. (vented)
R2 at 200F,hold at 800F for 15 minutes. (vented)
R3 at 300F, hold at 1280-1300F for 15 minutes
R4 FULL, hold 960F 1 hour.
R5 at 100F to 850F.
R6 at 300F to 600F.
Pros
Shiny, lead free, easy to work with
Cons
Needs wax or clear coat to maintain shine (some as leaded)
Other Thoughts
This is a tin - Bismuth combo. It picks up a little dark oxidation if not coated (much like leaded unwaxed solder).
Pros
Easy to work with, great for decorative solder, Great shine, takes copper patina better than leaded (if you do a good job cleaning), lead free, structurally excellent.
Cons
none
Other Thoughts
Use a product to neutralize the flux and clean well (I like method mint glass cleaner). Add a tiny snip of copper wire and use a paint brush. You can get an even copper patina that is so coppery you'd think that was what you soldered with. I apply rustolium clear coat and my works have been outside in Michigan for 12 months w/o oxidation. You can use painters blue tape over the glass or nail polish remover to take the clear coat off the glass if you want.
Pros
Great color selections
Cons
Other Thoughts
Pros
Easy to cut, fuses beautifully
Cons
luminescent tends to lose the Irid quality when fired up right
Other Thoughts
Pros
1. Nice design/look
2. Inexpensive
Cons
3. Lightweight, as product name says compared to heavyweight versatile stands
Other Thoughts
Pros
Cons
shipping costs
Other Thoughts
golden mirror
Pros
Sturdy metal garden stake. Well made and accepts small panels nicely.
Cons
Lays very low to the ground since.
Other Thoughts
Pros
Produces pieces which need only minimal cold-work. Fast lay-up.
Cons
REALLY pricey. Not sure the recommended shelf paper is needed, don't care for the texture it adds.
Other Thoughts
On-edge, or pattern work where glass doesn't quite meet the edge, will still involve cold-work to get crisp edges but it's quicker than the standard layup.
Pros
Sleek modern look. Large glue surface. Popular with customers.
Cons
I'd like an option for plain only...and larger packs.
Other Thoughts
Tried the other (plain) tube bails. These are better imho
Pros
Functional. Not a lot you can say about a kiln post.
Cons
Other Thoughts
