Product Reviews
Pros
I love the Miniscope refill kit because I already have the pattern, this kit and glass is all that is needed to make a kaleidoscope. Simple to do with beautiful results!
Cons
No Cons!
Other Thoughts
Pros
Easily spreadable with small brushes. Required application to the pattern only (not the form), and was re-positionable while setting
Cons
Took a very long time for the odor to dissipate. Would suggest using it outdoors.
Other Thoughts
Pros
Very reflective and gorgeous bevel.
Cons
None
Other Thoughts
I used these to border a window shutter and due to fitting, had to cut/grind a little off the edges. This worked surprisingly well and didn't take away from the overall look.
Pros
The double-cut gives a project a very elegant look.
Cons
None, except be careful about scratching.
Other Thoughts
I used various sized double cut bevels in window shutters I was making. I had to cut some of them down in order to fit the size. This also was easy to do and still looked good. The double cut allows some wiggle room for adjustments like this.
Pros
Perfect size, good quality
Cons
None
Other Thoughts
Pros
I have used the 3/4" grinder bit for years. After many years of trying first one than another, I decided these are the best for me.
Cons
Other Thoughts
I wish there was a way I could see how much of the bit I've used without havin to move it up or down.
Pros
On first try worked fine for me. Filled it with cut up fusible glass, and it came out even better than I expected.
Cons
None so far.
Other Thoughts
Pros
This came out with a really lovely high shine silver. I used the Magic Outlining Pen - Fine Point, which worked brilliantly. I dipped a paintbrush and then wiped it into the pen well. This drop covered about 6-7 pendants in scroll work before it ran out. (Only one layer is needed for complete coverage) What you paint is what you get so even tiny dots work and don't spread out but if you make a mistake make sure you wipe it off well or else you may end up with silver swipe marks. It should last quite a while as you only need a tiny amount. I was very impressed with the color & shine and ease in drawing via the pen.
Cons
No instructions other than on this website. It smells, work in a ventilated area and wear a mask. It is a brown color before firing so it is hard to see on black and dark glass. It is pricy but if you want silver I'm not sure if there are any other options that work as well.
Other Thoughts
I would buy again.
Pros
I have a lot of fracture - streamer collage glass, when using small pieces, for wind chimes, etc. I use the confetti to balance the colors in all pieces - it's wonderful.
Cons
Other Thoughts
It has colors in all of the different Bullseye patterns - very economical way to use even the smallest pieces effectively.
Pros
This baby is quiet, clean & versatile! I love the fact that I can switch 3/4" to 1/4" & 1/"8 bits with ease. It provides all that is expected from a grinder & more. Clean-up is easy.
Cons
The accessory drawer sticks a bit, but a little silicone lube does wonders!
Other Thoughts
This unit replaced a 30+y/o Glastar which I inherited years ago. It finally developed a leak, after years of moderate use. So I went with the same brand.
Pros
love this glass
Cons
wish it was cut straighter
Other Thoughts
Pros
Makes cutting angles easier and a lot cleaner.
Cons
Handle needs tightened every 4th or 5th cut.
Other Thoughts
Wish it came as a set with the miter box, almost didn't order it as I thought it was part of a set as pictured.
Pros
Easy to create beautiful pieces with little skill. Scraps of dichroic and plenty of clear add depth.
Cons
Too big to wear for a pendant for most women. The prong is delicate. I ruined a similar mold due to glass sticking.
Other Thoughts
I highly recommend using MR-97 Boron Nitride Mold release.