Shop By Category
LAST DAY - Save Up to $1,100 on Kilns

Square Knob Casting Mold

Square Knob Casting Mold by Creative Paradise
$34.95 USD
We're sorry, discount coupons do not apply to this item.
Item# 806166  
Item ships within approximately 7 weeks.
Special Order Item: This is a non-stock item ordered specially for you. Approximate shipment date is subject to change based on manufacturer availability. There are no cancellations on orders once they are placed and this item is non-returnable.

Product Features

  • Create custom cabinet and drawer pulls!
  • Creates four 1-1/2" square knobs
  • Ceramic molds can be used many times


Product Description

Create your own unique cabinet and drawer pulls. Fill mold with glass frit, scrap and powders to create one-of-a-kind cast glass decor. Try combining powders to create a marbled look or accent with dichroic. Mold measures 5" square and creates four 1-1/2" square knobs. See size perspective of mold with quarter images shown.

These casting molds are specifically designed to work with hardware kit #93202 (sold separately).

For complete instructions click on "View User Manual".

Images courtesy of Creative Paradise Inc.

Customers Who Viewed This Item Also Viewed

Customer Reviews

5 out of 5 stars
5 star  
  2
4 star
  0
3 star
  0
2 star
  0
1 star
  0
See all customer reviews
Write a customer review

Product Images from Customers

Be the first to share product images with other customers
5 out of 5 stars
  •   Love the ability to customize
By on
Pros : Want to match just the right color? Want to just have fun? I used glow powder and various frits to make a set of galaxy knobs for my daughter's dresser and it worked perfectly with her room's decor. The bubbles even fit in as stars....
Cons : No weights given for filling, just "mound up the top" which you have to go OVER the top of the mold, or risk not being able to fit in and cover the hardware. Not what I was expecting... and these end up a bit heavy.
Other Thoughts : These get built up backwards from other frit projects since the bottom of the mold is the stem rather than the textured front. This can be a boon to those not used to typical casting, but makes it a bit messier to plan as things melt unevenly. Also, be sure to use a good glue to adhere the hardware (it's going to be twisted a good bit!) and be aware that if you use all clear, you'll see the hardware through the knob.
Was this review helpful to you?  
2 of 2 people found this review helpful
5 out of 5 stars
  •   Makes great pull knobs
By on
Pros :
Cons :
Other Thoughts : Be sure to use fine or medium frit down in the bottom.
Was this review helpful to you?  
1 of 1 people found this review helpful

See all customer reviews
Related Content
My commuting jacket is drying over a kitchen chair, and the cat has come down off the workbench to sniff the sleeve with deep suspicion. Fair enough. Theres a stripe of brown grit up the back, the kind wet roads and mashed leaves throw up all autumn.That grit ends up on brakes too. So heres a short pre-winter check for Defiant riders. Im working from general technique and the JupiterBike product listings, not from my own bike.Why autumn chews through brake padsQuick jargon check. On a disc brake, a metal disc called the rotor is fixed to the wheel hub. Two pads squeeze it to slow you down. They sit in a caliper, the clamp that straddles the rotor.Wet roads carry grit and leaf mush onto the rotor. When you brake, that grit gets trapped between pad and rotor and works like sandpaper, so the same commute wears pads faster
My commuting jacket is drying over a kitchen chair, and the cat has come down off the workbench to sniff the sleeve with deep suspicion. Fair enough. Theres a stripe of brown grit up the back, the kind wet roads and mashed leaves throw up all autumn.That grit ends up on brakes too. So heres a short pre-winter check for Defiant riders. Im working from general technique and the JupiterBike product listings, not from my own bike.Why autumn chews through brake padsQuick jargon check. On a disc brake, a metal disc called the rotor is fixed to the wheel hub. Two pads squeeze it to slow you down. They sit in a caliper, the clamp that straddles the rotor.Wet roads carry grit and leaf mush onto the rotor. When you brake, that grit gets trapped between pad and rotor and works like sandpaper, so the same commute wears pads faster
My commuting jacket is drying over a kitchen chair, and the cat has come down off the workbench to sniff the sleeve with deep suspicion. Fair enough. Theres a stripe of brown grit up the back, the kind wet roads and mashed leaves throw up all autumn.That grit ends up on brakes too. So heres a short pre-winter check for Defiant riders. Im working from general technique and the JupiterBike product listings, not from my own bike.Why autumn chews through brake padsQuick jargon check. On a disc brake, a metal disc called the rotor is fixed to the wheel hub. Two pads squeeze it to slow you down. They sit in a caliper, the clamp that straddles the rotor.Wet roads carry grit and leaf mush onto the rotor. When you brake, that grit gets trapped between pad and rotor and works like sandpaper, so the same commute wears pads faster