Shop By Category
3 Days Only - Up to 70% OFF Superior Bevels
get started : stained glass

Get Started

Getting started has never been easier. Select a category from the pull down or search for more information. This list is pulled from our Blog, Video, and Tips areas. Looking for products? Check out our Start-Up Kits.

Dealer Spotlight: Abstract Stained Glass

Dealer Spotlight: Abstract Stained Glass When John Falibota of Girard, Ohio, told his wife he was going to take a stained glass class, she couldnt stop laughing. John had a life-long fear of cut glass. If a glass broke in the house, he wouldnt go near it for fear of cutting himself. But over time his fear subsided, and in 1984 he and his wife, Marlene, started attending craft shows and eventually opened their very own stained glass store in 1999. Their 1,200 sg. ft. store provided classes and supplies as well as fulfilled custom orders. Seven years later, they moved to an even larger store (2,375 sq. ft.) and added imported blown glass and Russian glass animals to their inventory. Due to the tough economic climate, John and Marlene recently moved again to a smaller store (1,600 sq. ft.). They dropped the imported glass and returned to their roots-teaching, supplies and custom work. They

  • Apr 30, 2010

Stained Glass Start Up Kit Unboxing

Stained Glass Start Up Kit Unboxing Its Back 2 School Season. For all of our glass enthusiasts, make sure you are equipping yourselves with the essentials in our all-in-one stained glass start up kits. Stained Glass Start Up Kit https //www.delphiglass.com/tools-supplies/tool-kits/stained-glass-start-up-kit

Master Beveler Kent Lauer to Teach at Delphi

Master Beveler Kent Lauer to Teach at Delphi For more than 30 years, Kent Lauer has been working with glass. His passion lies with beveled glass in particular, and hes made a great impact on the craft with his cutting-edge (no pun intended) techniques. Living in Southern California, Kent has had the opportunity to work on custom glass for Hollywood stars, movies and commercials. He has written articles for Glass Craftsman magazine and Glass Patterns Quarterly. In addition, hes been teaching his techniques to students around the country for more than 25 years. Delphi is proud to have him teach at its Lansing Creativity Center next month. If you live in the Michigan area, or are planning to travel there this summer, we encourage you to look into taking Kents Faceted Dichroic Glass Pendants class. In this class, students make beautiful, faceted dichroic glass pendants and learn awesome cold working techniques. The brand new hands-on class covers all

  • May 04, 2010

Question & Answer | Delphi Live

Question & Answer | Delphi Live Join in as Roy and Val answer some common questions when it comes to different topics such as fusing and stained glass best practices.

Holding Small Pieces In Place While You Solder

Holding Small Pieces In Place While You Solder 1. Make sure that your pieces are clean and dry. Cut a piece of clear contact paper, remove the backing and lay it sticky-side-up over the pattern. 2. This is a perfect way to hold cut glass, globs, jewels, or marbles in place for tack soldering. As you can see in the photo, you can even move the sheet around and, if you are careful, you shouldn’t disturb the glass at all. 3. Tack solder the pieces to each other as you normally would. Then, remove the contact paper and finish soldering the front before turning the project over and soldering the back. Reprinted with permission from Stained Glass News. All rights reserved.

  • Jun 07, 2010

GST Bevels | Delphi Live

GST Bevels | Delphi Live Our annual bevel sale is going now (March 2025 - April 2025) so we think it’s the prefect time to talk about premium GST Bevel Clusters. They have been designing and creating quality bevel clusters for over 30 years. Hear from Roy and Val as they share all the reasons we love creating with these premium clusters. GST Bevels https //www.delphiglass.com/search?searchtext=gst%20bevel

Regular Solder vs. Lead-Free Solder

Regular Solder vs. Lead-Free Solder I have some questions about Lead-Free Solder. Does it tarnish over time? Can you use patina on it? Does it flow like regular solder? Is it better than regular solder? We are sure that you arent the only one with these questions. Lets start with the question of whether or not its better than regular solder. Since the harm from lead is caused by ingestion, any project that will come in contact with food or food containers should be made with lead-free solder. In addition, anything that is handled, like jewelry or kaleidoscopes, should be made with lead-free solder. Hands have a terrible habit of making it into the mouth before they get washed. So, yes it is better than regular solder in these situations. As far as working with solder, you should be diligent about cleaning your hands after touching any solder. Dont eat, drink, smoke, or do anything

  • May 05, 2010

Delphi Superior Foil | Delphi Live

Delphi Superior Foil | Delphi Live Introducing Delphi Superior Foil. During this Facebook Live Roy and Val are talking about foiling basics. Learn why you would use a color backing, what sizes to use and more. Superior Foil https //www.delphiglass.com/search?searchtext=superior%20foil

Working with Stained Glass on a Schedule

Working with Stained Glass on a Schedule My time is limited and I can only work in 2-4 hour intervals. Are there any preventative steps that I should take to assure that my work will be in good shape when I return? Many hobbyists find themselves in the same position, and this is a very good question. We cant cover every possible scenario, but hopefully we can help. Obviously, there are areas where it wont make any difference if you get interrupted. For instance, pattern prep, glass cutting, fitting, and grinding. However, if you do find that you need to stop in the middle of applying copper foil, youll need to think about how long it will be until you can resume the job. If it will only be a few days, there isnt anything special that youll need to do. But if it will be longer than that (or you live in a particularly humid area),

  • Jul 07, 2010

Textured Glass Showroom Walk-through | Delphi Live

Textured Glass Showroom Walk-through | Delphi Live We had a video request. In this Facebook Live Roy and Val are walking you around our showroom and talking about textured glass. Showing the different styles and their stunning details. Textured Glass https //www.delphiglass.com/search?searchtext=textured%20glass

Fused Stained Glass Pendant

Fused Stained Glass Pendant Sometimes necessity is the mother of invention, and sometimes invention comes when you have nothing to lose. Early in my career, I had three metal-clay-and-fused-glass pendants fail in a single day. The glass cabochons simply shattered and fell away from the silver after the pieces were fired because I had neglected to cut an expansion hole underneath the cabochons. Augghh. Lesson learned. But now I was left with three ugly pieces of silver, each with small pieces of glass permanently fused into bizarre locations on the surfacea loss I could not afford. Weeks later, after tryingunsuccessfully to remove the glass, I decided to try fusing glass in patterns onto the surface of the pendants. The results were surprising, and the Stained Glass process was born This technique begins with any fired metal clay with a flat surface. Small shards of fusible glass are then attached to the silver. After

  • Sep 20, 2010

Reinforcing Stained Glass Windows

Reinforcement is necessary on larger windows. As a rule of thumb, a window more than three square feet should be reinforced. Either reinforcing bar or rod may be used for support. Be sure to consider this when designing the window so that the reinforcement does not intrude or compromise the design of the finished work. In either case the reinforcement is soldered to the back of the panel in one of two ways. The bar should be pre-tinned before use. You will solder the bar in several places at intersecting lines on the window. Rough the areas to be soldered on the bar with steel wool. Apply flux and coat the areas with solder. Doing this will make soldering the bar to the window much easier. Place the bar on edge and solder to the window in the predetermined areas. When using rod, a length of pre-tinned wire is first

  • May 20, 2012

Using a Solder Wick

Using a Solder Wick Use to easily wick away excess solder and achieve the perfect solder lines. Can also be used to remove a piece thats already soldered in place, as shown in action image. Simply flux both project and solder wick, then place wick over desired area, heat with soldering iron and watch the wick absorb the excess solder while sliding it out of the solder line. Ideal for removing solder for stained glass repairs or for simply cleaning up messy solder lines. 5 foot strip packaged in convenient dispenser roll for tangle-free storage.

Protecting Stained Glass from the Elements

Protecting Stained Glass from the Elements I want to make some copper foil and lead projects for use outside. How do I protect them from the elements? If you construct your project using the lead technique, there isnt anything else you need to do. The cementing process weatherproofs the project. If you use the copper foil technique, you will want to make sure that there is something to prevent the copper foil from pulling away from the outer edges of the project when it gets wet. This can be accomplished by using a rigid metal channel (zinc, copper or brass) or by soldering a reinforcing wire around the perimeter of the piece. Another thing you should consider is using mosaic techniques. Either the direct or indirect methods are great for outdoor projects. Your supplier will have information on these techniques if you are unfamiliar with them. Whatever technique you choose to employ, it is best to

  • Aug 09, 2010

Tiny Angel Kit | Delphi Live

Tiny Angel Kit | Delphi Live During this Facebook Live Roy and Daisy walk you through our latest projects created with our exclusive Angel Bevel Kit. Tiny Angel Bevel Kit https //www.delphiglass.com/bevel-clusters/religious-holiday/tiny-angels-bevel-panel-kit

Is My Piece of Glass Cracked?

Is My Piece of Glass Cracked? How can I tell if a piece of glass is cracked? Did you ever notice the workers in your local glass shop tapping on a sheet of glass before they move it? They do that to see if it has any cracks. Cracked glass has a very different sound when tapped than intact glass does. This will be the best way to tell if your glass is broken. However, you should try it out on some other sheets before you try it on a piece that you think may be broken. Once you have heard a cracked piece, you will know what it sounds like. Hold the sheet from the top edge with one hand. Hold it out and away from your feet, just in case. Gently tap the sheet with one of your knuckles. A solid sheet of glass with no cracks will have a solid, clear ringing sound.

  • Aug 17, 2010

Sandblasting | Delphi Live

Sandblasting | Delphi Live During this Facebook Live Roy and Val talk about sandblasting and show you how it’s done. Plus how to use it for stained glass, fusing and more. Sandblaster Cabinet with Gun https //www.delphiglass.com/sandblasting/sandblasters/sandblasting-cabinet-with-gun

Setting Up Your Stained Glass Workshop

Setting Up Your Stained Glass Workshop I am about to set up my new workshop. I was just wondering what you think are the most important things to include? Since every situation is different, we cant give you specific answers, but here are some things that you should give some thought to. We think that the two most important things in a workshop are safety and comfort. You obviously want everything in your workshop to be as safe as possible. Ideally, you will want to have proper ventilation, plenty of lighting, safe storage areas for glass and chemicals (do you have children?), grounded electrical connections, no extension cords, safe disposal for glass and supplies (trash cans as opposed to plastic bags), and easy to clean surfaces (no carpet on the floor). Comfort is the next most important consideration. The height of your work surface is very important. If you arent comfortable, you wont be able to

  • Aug 24, 2010

Studio Pro Table Lamp Kit | Delphi Live

Studio Pro Table Lamp Kit | Delphi Live Roy and Daisy will walk you through the process of creating lampshades for the Studio Pro Table Lamp Kit. We will be showing it done using fused glass as well as stained glass. Shop the lamp https //shorturl.at/p4Mii Download Daisys Patterns https //shorturl.at/fzDQw

The Correct Way to Mitre Lead for Diamonds

The Correct Way to Mitre Lead for Diamonds Can you please tell me the correct way to mitre the lead for diamonds? Diamonds can be tricky. This diagram shows the way we would go about cutting the lead for a diamond. We find the easiest way to decide where to mitre the lead is by drawing lines on the diamond connecting the opposite points. Then, put a piece of lead on the glass and extend that line onto the lead. Now remove the lead and cut it where you marked. Replace it on the glass, lining it up where it belongs and mark the other end of that piece of lead. Cut it, replace it, and continue until all of the pieces of lead are cut. Reprinted with permission from Stained Glass News. All rights reserved.

  • Sep 13, 2010

Creating with Studio One Pre-Cut Kits: Step-By-Step | Delphi Live

Creating with Studio One Pre-Cut Kits: Step-By-Step | Delphi Live We have received feedback requesting step-by-step instructions on creating with the Studio One Pre-Cut Kits. So during our Facebook Live Roy and Daisy walk you through the process. Pre-Cut Kits https //www.delphiglass.com/stained-glass-supplies/pre-cut-kits/

What is Tinning?

What is Tinning? In my reading I keep seeing mentions of tinning. What is it, and how do I do it? Tinning is the term used to describe the action of putting a thin coat of solder over something else, for instance copper foil, a brass vase cap, or a soldering iron tip. One reason may be to protect the metal from the air, which is usually in reference to a soldering iron tip. The other purpose may be to color the metal underneath, which we’ll address here. You may have seen it suggested that you tin all exposed copper foil on the surface of a panel before running a solder bead. (You will need to apply flux before tinning and again before running the bead.) Some people feel that this allows them to run the final bead more easily because all of the foil edges are already covered. Other people prefer to

  • Aug 13, 2010

Glass Showroom Tour - Stained Glass Edition

Glass Showroom Tour - Stained Glass Edition Take a tour of our stained glass section in our Lansing creativity showroom.

Avoid Getting Stiff and Sore

Avoid Getting Stiff and Sore I really enjoy stained glass, but after I work on a project for a while, I get stiff and sore. What am I doing wrong? We all enjoy stained glass and most of us find it to be a relaxing hobby. But did you ever finish a project, step back to look at it and realize that your back hurt, or your hands feel tight, or you have a splitting headache? Did you know that many of these symptoms can be avoided by applying a few simple rules of ergonomics. You most likely have heard the word, but did you know that it’s just a fancy way of saying, “fit the task to the person?” There are many ways to accomplish just that, and you’d be surprised how simple it really is. Most people are so intent on what they are doing (enjoying our favorite hobby. ) that they don’t

  • Sep 28, 2010

Creating Stained Glass with Paper & Fabric | Delphi Live

Creating Stained Glass with Paper & Fabric | Delphi Live Roy and Daisy will walk you through the process of fun ways to incorporate fabric and paper into your stained glass project. Supplies used https //www.delphiglass.com/search/FBLive071724

Hot Summer Colors and What to Do With Them

Hot Summer Colors and What to Do With Them Yellow, red and sizzling orange are three of summer 2011s hottest colors. These colors are stunning in glass. In fact, red has always been a coveted color in stained glass, and remains one of Delphis best-selling hues. According to Jaymes Richardson of Civility Design (www.civilitydesign.com) for HGTV, When you have accents of red, it draws attention to other things you might not even notice in the room, Richardson says. The whole idea is to entice, intrigue [and] invite without clubbing you over the head and dragging you in. Red and orange are great colors for art glass accents like candleholders, bowls, vases, sculptures, etc. And yellow glass accessories are great for brightening a room with little sunlight. Create a pendant lamp in yellow or red for a dramatic pop of color. David Bromstad, host of Color Splash on HGTV says, Hot colors like reds and oranges will energize you and

  • May 23, 2011

Adding Zinc and Handy Hangers to Round Panels | Delphi Live

Adding Zinc and Handy Hangers to Round Panels | Delphi Live Learn from Roy and Daisy how to create a zinc frame to round and oval panels. Plus, see how to add Handy Hangers to them. Zinc Came https //www.delphiglass.com/search?searchtext=zinc%20came%20 Pliers https //www.delphiglass.com/search?searchtext=pliers

Glass Garden Art by our Facebook Fans

Glass Garden Art by our Facebook Fans I am often inspired by the glass work of our customers and Facebook fans. They are always thinking outside the box and using Delphi products in new and interesting ways. Recently we asked our fans to send us photos of glass art from their very own back yards. We received so many amazing projects, we decided to share a few here on our blog. Joleen Siebert, of Magic Gardens Stained Glass, created these two beautiful stained glass Koi fish panels (top left and at right). The larger panel is made up of 120 pieces of Spectrum, Kokomo and Bullseye glass. The smaller panel is made up of 40 pieces of Spectrum and scrap glass. It is framed in copper tubing. Both are foil construction. She designed these pieces from a spectrum pattern and adaptations of photos she found online. Mark Hall of Hallmark Glass created a whimsical birdbath (at left)

  • Aug 04, 2011

Studio Pro Smoke Absorber

Studio Pro Smoke Absorber Hear from our stained glass expert Roy why he loves the Studio Pro Smoke Absorber. Were sure it will be your favorite too.

Contest: Where in the World Do You Read Your Delphi Catalog?

Contest: Where in the World Do You Read Your Delphi Catalog? If you find yourself reading our catalog in the most unusual places, enter our catalog contest, sponsored by Uroboros Glass, for a chance to win a glass pack worth more than $100. How to Enter Email your photo(s) to [email protected], (there is no limit to the number of photos you may submit), by Nov. 18, 2011. Well post an album of all the (appropriate, please) photos on Delphis Facebook page, and our fans will like their favorites. The person who submitted the photo with the most likes as of midnight EST on Nov. 25, 2011 will be the winner. Winner will be notified via email. Winner will be allowed to choose either the Flower Power Stained Glass Pack or the Hot Colors 96 Glass Fusing Pack from Uroboros Glass. Contest open to residents of contiguous US states only. How to Win Our Facebook fans will decide the winner. Whoevers photo

  • Oct 28, 2011

Creating Stained Glass Mirrors

Creating Stained Glass Mirrors In this Facebook live video we are talking about creating a stained glass mirror. Roy and Val walk you through of process of cutting your mirror, sealing it, creating the boarder and assembly. Shop supplies shown in this video. https //www.delphiglass.com/search/FBLive031324

Kachina Stained Glass Celebrates 4th Anniversary in Style

Kachina Stained Glass Celebrates 4th Anniversary in Style Linda and Alan Cook of Kachina Stained Glass are preparing to celebrate their stores fourth anniversary. They dont take the accomplishment lightly. We are extremely thankful that in this market we have been able to keep our stained glass store in Mesa, Arizona open, not all of our competitors have been so lucky. Anniversary festivities will take place on Nov. 5 and 6 at the store. They will be giving away goody bags, holding raffles and offering daily door prizes. If you are in the Mesa area, stop by and enjoy the fun. Kachina Stained Glass, LLC is located at 1762 South Greenfield Road, Suite 101, Mesa, AZ 85206. They can be reached at 480-655-2000. Find a Delphi Elite Dealer in your area. Interested in becoming a Delphi Elite Dealer?

  • Oct 04, 2011

Copper Foil Overlay | Delphi Live

Copper Foil Overlay | Delphi Live In this video we are talking about copper foil overlay for stained glass. Roy and Daisy walk you through of process with tips and tricks along with a how-to demo. Hakko Soldering Iron https //www.delphiglass.com/soldering-supplies/soldering-irons-tips/hakko-fx-601-soldering-iron Copper Foil https //www.delphiglass.com/search?searchtext=Copper%20foil Copper Backed Foil Sheet https //www.delphiglass.com/copper-foil-supplies/copper-foil/edco-copper-backed-foil-sheet Glass Pro Flux https //www.delphiglass.com/soldering-supplies/flux-finishing-chemicals/glass-pro-flux-4-oz

Beginner's Notes: Achieve a Stained Glass Look in Fusing

Beginner's Notes: Achieve a Stained Glass Look in Fusing I saw a free stained glass pattern in the Delphi newsletter that I just loved. I knew if I made it into a stained glass panel, I wouldnt be able to eat off of it. So I set out to create a fused glass platter instead. My husband and I decided to cut all the pattern pieces by hand (thinking about it later, I would have used my Delphi Taurus 3 glass saw). We sandwiched all the fusible pieces between two sheets of transparent 96 COE glass. In the end, I didnt have the heart to slump it into its mold. I made a channel on each side with fiber paper foam and transparent glass, to hang it with.(I have learned to double the channels for the wire loop.) There were some bubbles due to our handcutting and gaps, so the second fusing got rid of some of those. During

  • Nov 30, 2011

Stained Glass Boxes & Hinges | Delphi Live

Stained Glass Boxes & Hinges | Delphi Live Want to create your own custom stained glass box? Roy and Val show you how to construct, assemble and work with the tubes and rods. Stained Glass Boxes book https //rb.gy/v3xntt Box Supplies https //tinyurl.com/2p9npf8a

Don't Miss Delphi's Winter Open House

Don't Miss Delphi's Winter Open House Delphis Winter Open House is one of our most popular events of the year. Free to the public, visitors can attend previews of many of our most popular classes - even new classes. Dont miss this exciting chance to meet our fabulous instructors and network with other artists. When Saturday, January 14th 2012, 10am to 4pm 10 00 am - 11 15 am Free Flameworking Previews Glass Bead Making / Beads on Minor / Intensive Bead Workshop / Intro to Boro/Boro Jewelry / Decorative Blown Glass Spheres / Marble Making 11 30 am - 12 30 pm Free Stained Glass Previews Beginning Lead Came / Lead Came Construction / Cutting Art Glass / Soldering Made Easy Bandsaw Magic / Designing & Installing Kitchen Cabinets Beginning Stained Glass / Copper Foil Studio / Tiffany Lamps / Panel Lamps 12 45 pm - 1 15 pm Free Jewelry Previews Beginning Metal Clay

  • Dec 28, 2011

Lead Came | Delphi Live

Lead Came | Delphi Live Learn about lead came basics. Roy and Daisy will walk you through of process as well as show a few demos. Lead Came https //www.delphiglass.com/search?searchtext=lead%20came%20 Panel Vise https //www.delphiglass.com/tools-supplies/assembly-tools/panel-vise Lead Stretcher https //www.delphiglass.com/lead-came-supplies/came-saws-tools/lead-stretcher

Peacock Lamp Lights Up Our Blog

Peacock Lamp Lights Up Our Blog Choosing a winner for the Light Up Our Blog contest was virtually impossible. With more than 30 unbelievable entries, how could we choose just one? Ultimately this peacock gem stole our hearts. Daisy C. from Tucker, GA will receive a Flower Power premium glass pack from Uroboros. You can read her story below. Well be featuring many other entries on our blog and in our catalogs in the future, so check back frequently and thanks to everyone who entered the contest. View other entries on Facebook or view a slideshow of entries. I am Daisy Comer. I leave in Tucker, GA. I have been working with Stained Glass for about 10 yrs. I started with class at Colonial Stained Glass in Marietta, GA. Donna and Susan taught me well. My shop is in my sunroom on the back of my townhouse. It is a nice setting and I love working

  • Mar 05, 2012

Creating with Bullseye Holly Berry Glass | Delphi Live

Creating with Bullseye Holly Berry Glass | Delphi Live Roy and Val will show you how to cut it and use it for both fusing and stained glass. Bullseye Holly Berry https //www.delphiglass.com/bullseye-glass/fracture-streamers/bullseye-fracture-streamers-holly-berry-on-clear-90-coe Dichroic Flakes https //www.delphiglass.com/search?searchtext=dichroic%20flakes Rapid Fuse https //www.delphiglass.com/fusing-supplies/chemicals/bullseye-glastac-gel-fusing-adhesive-4-oz Boron Spray https //www.delphiglass.com/fusing-supplies/fiber-paper-shelf-wash/zyp-boron-nitride-mold-release-13-oz

Light Up our Blog Series: Katalin Szabo

Light Up our Blog Series: Katalin Szabo Katalin Szabo completed a 9,000 piece jigsaw puzzle about a year ago, and found herself bored by completion. The puzzle lacked the creativity Szabo was seeking. Her husband suggested she learn the art of stained glass and now shes hooked. This was her first stained glass lampshade (we were impressed to say the least). Szabo says she made all the mistakes possible in the process of making her lamp, but learned a lot in the process. What did you learn in the process of making your first lamp? Tell us in the comments section below, and on Friday, May 11, well pick one person to receive Making Stained Glass Lamps book, complete with full-sized patterns.

  • May 07, 2012

Working with Patinas | Delphi Live

Working with Patinas | Delphi Live Dive into using patinas on stained glass projects. Roy and Val will show you how to use each as well and tips and tricks. Novacan Patina for Lead and Solder https //www.delphiglass.com/soldering-supplies/flux-finishing-chemicals/novacan-black-patina-for-lead-and-solder-8-oz

Delphi is Pinterested in Your Glass Art

Delphi is Pinterested in Your Glass Art If you've ever stumbled across a project you love on DelphiGlass.com or read an Artist Spotlight in our catalog and wondered where we get all the project images the answer is simple. Most of them come from people like you - our customers - and at Delphi we love to show off your work. We regularly browse the Delphi Online Artist Gallery for projects and artists that inspire us to share. Open your own Delphi Artist Gallery and upload your projects. You could find your art features in a Delphi email, on our Pinterest boards or in an upcoming Delphi catalog. Delphi's Pinterest boards are a great place to find inspiration and get fresh ideas for your next project. If you want to get creative promote your studio or gallery or just show off your art - let Delphi help. Follow us on Pinterest to keep up on the latest

  • Jan 16, 2015

Stained Glass Spinners | Delphi Live

Stained Glass Spinners | Delphi Live Roy, Daisy and Val show you how we created our spinners as well as assembling plus tips and tricks. Came Notcher https //www.delphiglass.com/lead-came-supplies/came-saws-tools/90-degree-notcher Patina Buddy https //www.delphiglass.com/soldering-supplies/flux-finishing-chemicals/patina-buddy Came Hangers https //www.delphiglass.com/search?searchtext=hangers

Learn from the Best- Spring 2015 Delphi Guest Instructors

Learn from the Best- Spring 2015 Delphi Guest Instructors The Spring 2015 session of art glass classes at Delphis Creativity Center in Lansing, MI is all set to start. This season renowned glass artists Cathy Claycomb and Margaret Zinser join Tim Drier and Carol Shelkin to help expand the scope of your glassworking skills. Get to know each artist and their work, then see which class is right for you. Class sizes are limited so register now to ensure your opportunity to work with these amazing artists. Tim Drier Tim Drier has been a glassblower for 25 years, and applies his scientific glassblowing expertise to artistic flameworking. He concentrates on creating decanters, goblets, vases, and human sculptural forms. Drier has taught flameworking courses at The Studio and the Pittsburgh Glass Center, and has demonstrated at the International Flameworkers Conference at Salem Community College. Check out Tims work on his Corning Museum of Glass page or

  • Mar 04, 2015

Weller 80 Watt Soldering Iron with LED Halo Ring

Weller 80 Watt Soldering Iron with LED Halo Ring We love the light ring on this soldering iron. Order yours https //www.delphiglass.com/soldering-supplies/soldering-irons-tips/weller-80-watt-soldering-iron-with-led-halo-ring

Dealer Spotlight: Avalon Stained Glass

Dealer Spotlight: Avalon Stained Glass Twelve years ago Arlene saw an ad for a two-week workshop on stained glass. Arlene Wright-Correll and her husband Carl Correll had just retired from 43 successful years in business, the last 7 spent building and then running their own B&B and campgrounds on the Appalachian Trail. When Arlene approached her husband about taking the class together, Carl thought she was crazy -- he couldnt even cut glass. But being the good husband he was, he went along with her idea and became what Arlene affectionately calls, the Stained Glass Frankenstein Monster. For 12 years now, Carl has created and taught the art of stained glass. The couple began Avalon Stained Glass School & Creativity Center in December 1998. Between the two of them (currently ages 75 and 77), Arlene and Carl teach approximately 22 workshops in stained glass, leaded glass, etched glass, fused glass and all kinds of

  • Oct 04, 2010

Garden Art | Delphi Live

Garden Art | Delphi Live In this Facebook Live Roy and Val are sharing fun garden art ideas for stained glass, fusing and mosaics. Garden Stakes https //www.delphiglass.com/search?searchtext=garden%20stakes

Beadmaking Basics

Beadmaking Basics When I found Cindy Jenkins book Making Glass Beads back in 1998, I was immediately hooked on the idea of making glass beads. Id never seen handmade glass beads nor had I ever seen anyone make one. I was absolutely fascinated and I still am. Back then, the information was tough to find, but its much more popular now. I hope the following information will ease you into the fun world of making your own glass beads. Glass beadmaking is probably one of the easiest mediums to get started in when it comes to the tools and equipment you will need. Lets start by looking at the basic equipment Torch A good beginning torch is the Hot Head Torch which was made specifically for beadmaking. It burns hot and clean and runs off of a small MAPP gas tank (see description below). Work Surface Find an old table or desk.

  • Oct 06, 2010

Youghiogheny Baker's Dozen Limited Edition Glass Pack

Youghiogheny Baker's Dozen Limited Edition Glass Pack Exclusively at Delphi Glass. Follow the link for more details https /3J3sWma Project by artists Tim and Alice Biza. Pattern by Katz Creations in Stained Glass. Music Denim Musician EnjoyMusic Site https //enjoymusic.ai

Connecting Your Torch to the Work Table

Connecting Your Torch to the Work Table Heres how to safely connect your torch to the work table. 1. Collect the hardware. Youll need an L-bracket, one or two large adjustable hose clamps (big enough to fit around the Map gas tank) and a C-clamp (if you dont want to screw into your work surface). 2. Attach the L bracket. Screw the bracket directly into the table on the surface. If you prefer not to screw directly into the table, you can use a C-clamp to secure the bracket. Make sure it is tight enough to keep the bracket from slipping. 3. Secure the tank with hose clamps. Place both large adjustable hose clamps behind the vertical leg of the L-bracket before screwing the L-bracket to the table front. Place the MAPP gas into the hose clamps and turn the screws until the clamps are snug around the MAPP gas cylinder. Using two clamps will prevent the

  • Oct 07, 2010

Heart Projects You’ll Love #FacebookLive

Heart Projects You’ll Love #FacebookLive During our Facebook Live Roy and Val show you fun Valentine’s day project ideas. Download our free heart stained glass panel https //www.delphiglass.com/stained-glass-patterns/window-panels/free-stained-glass-heart-pattern