Product Reviews
Pros
This stuff is GREAT! I can cut a small piece just big enough for my project. Glass bottom is always smooth after firing. I use a shop vac to suck up the remains after removing my work. I always buy the 24"x24" sheets. GREAT STUFF!!
Cons
Cons? Hmmmmm, running out of paper and waiting for more to arrive? There are no cons..
Other Thoughts
I wish it were cheaper and I could buy by the roll.
Pros
Good Selections, worth the money. all individually packed in plastic pockets and sealed.
Cons
One of the pieces I received was less than the size described because it was obviously from the edge of the sheet as the size was curved off. got about half inch less in size.
Other Thoughts
Wish there was a slightly better Quality Control so that customers get the total area they paid for.
Pros
loved working with this glass i had the score it on both sides to break it
Cons
i had to score it on both sides
Other Thoughts
Pros
loved working with this glass i had the score it on both sides to break it
Cons
i had to score it on both sides
Other Thoughts
Pros
It is easy to use and with 16oz you don't have to worry about running out in the middle of a project.
Cons
Can be awkward to handle in tight places.
Other Thoughts
Pros
Lots of color, and creates a different look than just fusing squares of different textures and patterns of dichro sheet together. The pieces I make with this are usually big sellers.
Cons
Really works best if you fuse this using two layers of black as a base then a clear coat on top, so it does take a bit more glass than the typical two layer fuse and one extra full fuse cycle in the kiln. I just charge more for the pieces.
Other Thoughts
I work with slabs and then use a ring saw to cut pieces up after and then fire polish them. The way I have found that this product works best for me is to place it on top of two sheets (4x4's for me)of either black or cobalt blue glass (the blue is my favorite), full fuse, then cover with a sheet of clear and full fuse again. This creates the least amount of bubbles and covers up the rough edges that can be left behind if you don't clear cap it. I then cut the slab up with a ring saw and fire polish to finish. The pieces are beautiful!
Pros
Good size for jewelry products. Fires well with a torch, reasonable price
Cons
Requires good finger dexterity
Other Thoughts
very happy with results. will buy again
Pros
I love it fired irid down on a texture plate,I used mosaic. Looks like hematite.
Cons
None if you aren't expecting sterling silver look.
Other Thoughts
I was underwhelmed by the irid glasses until I tried them on texture plates. It makes a huge difference, they just come alive.
Pros
Absolutely loved this bevel cluster! Very easy to assemble and merge into a window panel.
Cons
None.
Other Thoughts
Pros
Easy to assemble. Beautiful!
Cons
None.
Other Thoughts
Should pay close attention to the alignment.
Pros
Actually used this on some retasked glass from an old house. The wide flange did a good job covering the edges.
Cons
Difficult to patina. But all zinc is even with the patina made for zinc
Other Thoughts
Pros
I have used this glass in a few projects. Beautiful!
Cons
worked well in several projects
Other Thoughts
Pros
This is much easier and faster than using kiln wash. And, if you let the pieces cool, you can reuse the shelf paper a couple of times.
Cons
Cost.
Other Thoughts
Don't breathe in the used shelf paper particles. Where a mask, or be very careful.
Pros
have and use layout blocks
Cons
great for making a good looking and square works
Other Thoughts
however, my homosote board has seen its best days and its very to locate new boards. could you pass info on ordering another ?