Pros
Easy to use

Cons
Can't do color

Other Thoughts
Bought a MICR (check-printing) toner cartridge for my printer to get correct iron content. Check online to see if there is one available for your printer. Most of the newer laser printers don't have the required iron content in their regular cartridges, but the MICR cartridges need the iron to enable them to be machine-processed. Fired above tack fuse, but below full fuse. 200 deg. ramp to 1100, hold for 20 min., ramp at 500 deg. to 1325, hold for 10 min., drop to 950 and hold for an hour, then 100 deg/hr to 700 deg. Nice deep brown image on flat glass, did not cap it, will probably try fusemaster over-glaze to protect it. Slumped into a wavy dish shape at 200 deg/hr to 1000 deg. then 500 deg/hr to 1280, soak for 20 min., drop to 950 and hold for 1 hour, then 100 deg/hr to 700. Slumped perfectly and did not distort image.

Pros
Read all the other reviews and add this to them. I'm extremely mechanically enclined and work with many tools in many trades. This is a great tool for this trade. This tool makes me look like I know what I'm doing... You get what you pay for and this tool is well worth the money. I left the bit on it for 4 years while I had other projects going. Removing the bit was no problem. The bit, after extended use, still works like new. I can't say enough about this grinder. I'm going to buy their disk grinder next.

Cons

Other Thoughts

Pros
This paper is very easy to work with. The paper feels thick yet it is easy to see through

Cons

Other Thoughts

Pros
Saves fingers from cuts while moving glass and grinding Gives grip Easy to apply

Cons
Comes off easily when wt, other wise have to cut it off, but not really a con

Other Thoughts
Love this stuff...has saved my fingers and grinding grip is more secure

Pros
I have been using this solder for nearly 4 years now and I do like the results. It solidifies very quickly which comes in very handy for tack fusing and use on 3D objects. One tip for using this is to get a temperature control for your soldering iron; I currently use a Hakko with a Mika temperature control to adjust the solder to its sweet spot. I find by setting the temperature control to 80-85% the solder flows well without any issues. Be sure to do frequent cleanings of the soldering iron tip with a cleaning block and you will find this solder works just fine.

Cons
Price

Other Thoughts
I would highly recommend this product; just make sure to use higher temperature settings on your temperature control, than you are used to from lead based solder and it will work fine.

Pros
These are such a help with organizing my glass sheets and best of all I can see all the beautiful colors all the time.

Cons

Other Thoughts

Pros
Love the look, very classy.

Cons

Other Thoughts

Pros
vivid colors, I love them and they are perfect for the animals and backgrounds I make.

Cons
Smaller than the sizes I normally purchase. Will need more than one set to have enough glass.

Other Thoughts

Pros
Excellent spark with a tree of life creation. Unexpected interest created in the finished product.

Cons

Other Thoughts

Pros
quick, easy and cuts very good

Cons
throat height does not allow for complete cut through on larger bottles..can cut by rotating bottle but must be REALLY careful.

Other Thoughts
can modify blade guide by cutting slots for screws gaining about 1 -1.5 inches. would like to see saw with 7-8 in height on blade guide

Pros
I really like the shape of bottles slumped in this mold. I've not had any problems with the mold. I use primo primer on it and it works everytime.

Cons

Other Thoughts

Pros
Makes real nice tea bag holders I use striped glass cut into small squares

Cons
None

Other Thoughts
Buy 4 you will use them all the time!

Pros
Lightweight, heats up really fast. Because of the light weight, you can solder much longer without wrist fatigue. Love this little iron. I would recommend it highly.

Cons
It's so small it drops down into my soldering station ring and rests on the inside of the metal rings which I have heard takes away some of the heat from the iron but I didn't notice any cool down so maybe this isn't a problem.

Other Thoughts
Doesn't come with an instruction manual but you can download the one page sheet from Delphi site. Also, I think the key is a waste of time, just something extra to store somewhere.

Pros
A beautiful silver sheen developes when fired. Very rich looking.

Cons
Color is not as dark as pictured, but still pretty.

Other Thoughts

Pros
I am so thankful someone was smart enough to build this item. Just line up the glass with the rubber "O" ring on the wheel.

Cons
CAN'T THINK OF ANY AS OF YET.

Other Thoughts
I HAVE ARTHUR IN MY HANDS, AND INSTEAD OF IT TAKE ALL DAY, TO APPLY FOIL, 20/30 MIN. IS ALL IT TAKES