Shop By Category
4 Days Only - Save on the Taurus 3 and Max 10
community : product reviews
 
Product Reviews
1
...
381
382
383
...
604
Jen-Ken Pro-Fusion Lite 16 Kiln by Nisey on January 18, 2014 5 stars
Pros
Fast set-up. Pre-set programs. Light weight, relatively to a brick kiln. large firing area, 16 inches square. consistent firing results
Cons
Depth/height only 3 inches. But I knew that before I bought it. So really no cons.
Other Thoughts
Recommend using thin fire shelf paper. In addition, I kiln wash to protect delicate material of kiln. Love the clamshell design, makes it so easy to place glass onto kiln surface.

Diamond Max 2 In 1 Grinder by lishster on January 16, 2014 5 stars
Pros
It's very versitle. You can use the top grinder for odd or rounded edges and the flat grinder for flat edges.
Cons
Yes, it does splash if you fill the water line too high, but I have a Morton splash guard surrounding the grinder and plexiglass beneath my grinder on my work surface area so that water doesn't spread everywhere. Other than that, it works great!
Other Thoughts
I've had my grinder for over 13 years now and have never had a problem with it. I'm not sure if it was manufactured in China, but overall I am very pleased with my grinder.

Diamond Max 2 In 1 Grinder by een65 on January 15, 2014 5 stars
Pros
I have had this grinder for several years and it is my workhorse. Mine is blue and is probably an earlier model. I like the fact that I can grind straight edges using the disc. I have added a Max Slash Shield to contain the splashing from the disc and a face shield to protect my eyes while using the grinding bit. After several years of regular use, the grinding disc separated. I contacted the manufacturer to ask about a glue or epoxy to affix it to the grinder, and was told that they would replace it free of charge because they considered it defective.
Cons
None
Other Thoughts

Hakko FX-601 Soldering Iron by sgbydesign2612160524 on January 15, 2014 4 stars
Pros
Heats up fast, holds the tempature, light weight.
Cons
Heavy electrical cord somewhat defeats pro of light weight. Hampers mobility.
Other Thoughts

Large Sterling Silver Plated Jewelry Bails - 25 Pack by MarthaK on January 13, 2014 5 stars
Pros
I like the large ones of these and they are my favorite. I have used them for years.
Cons
Other Thoughts

Tropical Rain Forest Streakies Glass Pack - 96 COE by none (top contributor) on January 9, 2014 5 stars
Pros
nice selection
Cons
None
Other Thoughts

Bullseye Southwest Splendor Value Glass Pack - 90 COE by Allison N on January 8, 2014 4 stars
Pros
a good mix of colors and opaque vs transparent glass
Cons
more like 4x8 than 5x8
Other Thoughts
Like the mix I received; but none were 5 inches in width, though almost all were 8 inches long. Every piece had an uneven edge (both shape and thickness) which made the usable glass even less. Otherwise I like the pack

Spectrum Light Orange & White Wispy by rosalabill on January 7, 2014 5 stars
Pros
This is the most beautiful color of orange with wisps of white. Easy to cut. I absolutely love this glass.
Cons
Other Thoughts

8.5 oz Pink Champagne Transparent Medium Frit- 96 COE by JewelsbyMissM on January 7, 2014 4 stars
Pros
Good as filler for deep colors. In small and medium molds it is also nice as a stand alone. nice color after firing
Cons
only that it seems to be on back order often
Other Thoughts

Hakko FX-601 Soldering Iron by Miny (top contributor) on January 6, 2014 5 stars
Pros
Yes the heating is good and steady, but what I love the most is that I could really enjoy soldering a 616 piece large panel without the hand fatigue and the pain, as I have a wrist injury (teared up cartilage). The dry brass sponge is a time saver too and keeps the solder tempt steady and clean of oxidize.This is my favorite soldering iron. I wont change it for any other.Oh and for the tiny key I just keep it in the iron station and "No Problema"
Cons
Other Thoughts
The previous soldering iron that I had was a torture on my wrist even before I had the hand injury. The solder at the end wasn't looking to good either because of this.

Large Cone Flower Mold by none (top contributor) on January 5, 2014 4 stars
Pros
Love the deep drape it makes. I've used it twice and I'm excited with what it does. Still need to practice to get a perfect result.
Cons
First time I had a terrible time getting the glass off the mold. I soaked it in water and the next morning the glass came off with a strong tug. The mold dried and was good to go again.
Other Thoughts
The second time, I used two thicknesses of thin fire paper over the top even though I have many layers of kiln wash on the mold. The glass came off easily.

Firefighter Helmet Bevel Cluster by ruthiewhitesell on January 5, 2014 5 stars
Pros
Perfectly shaped and easy to work with.
Cons
Other Thoughts

8.5 oz Cobalt Blue Opal Medium Frit- 96 COE by megan3norder on January 1, 2014 5 stars
Pros
love this color blue! so fun!
Cons
none
Other Thoughts
will buy again!

8.5 oz Yellow Opal Medium Frit- 96 COE by megan3norder on January 1, 2014 5 stars
Pros
love this color! so bright and fun!
Cons
none
Other Thoughts
will buy again!

Studio Pro 8" Running Pliers by megan3norder on January 1, 2014 5 stars
Pros
love these! perfect for breaking glass!
Cons
none
Other Thoughts
will buy more of these to have for friends to use when they come over!

1
...
127
128
129
...
202