Product Reviews
Pros
Be very careful in handling glass so as NOT to remove foil backing. Read instructions on this website for how to fire. My thoughts on tac fusing may not be working because the glass doesn't fully fuse to the layer underneath the royal glass. Perhaps air or water can get between the layers and cause a bad effect. I've always taken it up slowly to a full fuse and never had any come off or fade or not come out looking awesome. I do not have an automatic control unit to watch the heat, I do it manually.
Cons
Other Thoughts
Pros
While I agree with the above comments that it is costly and metallic "can" rub off IF you get it wet BEFORE working with it; but I really love this glass (all colors) for jewelry and highlights on various pieces. It always catches my customer's eye and sells very well. The two pieces I made where the metallic kind of smudged, I put it back as best I could and those two sold faster than any of the others. Love this glass, Can't wait until they get it in other colors like purple, blue or red! My jewelry customers would go ballistic!
Cons
Pricy when using a large piece on a 10 x 10 item, as the Gallery gets 50% of my price. Makes it had to sell those pieces.
Other Thoughts
Pros
this little kit has everything that you would need to get started and make wonderful enameled jewelry. You can plug in the kiln and start enameling. It may seem that the instructions are not clear, but enameling is really that easy. You just plug in your kiln, wait for it to get hot - about 15 minutes, then you clean your metal and shift the enamel onto the metal blank. You put the metal into the kiln and watch to see that it is all smooth and shiny. Take it out of the kiln and let it air cool. Then you continue putting on others layers of enamel. It is fun and easy.
Cons
The instructions included could be better. But purchase another book with this kit and it will be well worth it.
Other Thoughts
This kit has been given a bad rap. It's a great deal and will be perfect for a beginner. You need to be a self learner and have the ability to be brave and just try something without tons of instruction.
Pros
Sturdy
Less chance of bottle or blade slipping and misdirecting cut
Worth the money
Cons
Learning curve (for me as I am "bottle-cutting-challenged"
Cuts too much off of bottle bottom
Other Thoughts
Kudos, Ray. And thank you for your gracious responses! A wonderful inventor and owner!
Thank you Delphi for carrying a superior product at a reasonable price!
Pros
This product is easy to use and works great for the price
Cons
none
Other Thoughts
Pros
With a little practice this makes foiling very fast and easy! Don't give up if you don't get it right away. The extra effort to learn it is worth it!
Cons
SLIGHT learning curve and tiny pieces are best done by hand.
Other Thoughts
MUST use the right wheel for each size foil. VERY easy to change wheels and load foil.
Pros
Love this foiler! Very simple to use and so much faster than doing by hand! I am a table foiler lover too!
Cons
Not a thing!
Other Thoughts
Worth the very meager price! HIGHLEY recommend!
Pros
These are much easier to use than high temp wire. They are the perfect size for my ornaments, lay flat on the glass and fuse beautifully
Cons
none
Other Thoughts
Pros
they are a nice tight bobby pin...making them good for young childs hair as well as adult hair. Great stocking stuffers with dichro buttons glued on to give them bling.
Cons
Other Thoughts
Pros
A smaller mold is good as I can't use all the product of many larger molds.
Cons
You must use Fiber Paper - 1/4 inch and bended around corners or the glass will be extremely difficult to get out.
Other Thoughts
I also have had problems getting thin enough slices. I use a tile saw for most patterns because the Taurus 'balks' and these slices are pretty thick..
Pros
I like the assortment of dichroic. Some I have some I don't. Makes me want to make some more jewelry just to see what the new glass looks like fired. The sizes are ok for jewelry but not much more.
Cons
I truly hate getting anything that doesn't have a name. I can't reorder a larger size if I don't know what the name is of the dichroic. It can't be that hard to put a list of the glass in the pack. I could figure out which is which.
Other Thoughts
Pros
Good size, solid construction should last for many firings, nice design. It did make a beautiful plate which I re-slumped to a bowl.
Cons
Takes a lot of time to fill the voids precisely with colored frit. Once fired, the mold held on a bit to the glass even with MR97. The back of the plate had too severe an edge and deep relief in the design...almost sharp. I used a diamond pad to soften the edges.
Other Thoughts
I chose to use all frit instead of using a solid top sheet. It turned out really well.
Pros
Easy way to add an embellishment. Use with full fuse. I added the stars to angles I made for Christmas.
Cons
Other Thoughts
Pros
This is the ultimate mold!!!
Cons
Other Thoughts
Pros
This grinder does the job and has held up well for several years.
Cons
Other Thoughts