Product Reviews
Pros
Striking product.
Cons
Green pigment is water soluble. Don't try to grind it before it is fused like I did! The green rinses off.
Other Thoughts
Slightly softer than Bullseye so make sure any seams in the underlying glass are tight or it will sink and leave a thin spot. DON'T GET IT WET before firing!
Pros
Colors mix like paint. Nice color assortment.
Cons
A little thick out of the tube but works fine when thinned with water.
Other Thoughts
Use them like acrylic paints. Fired to 1300 without any problems burning off. Worked better when applying multiple thing layers vs. on thick layer.
Pros
good flux except it stained the coral I was tring to solder to a peice.
Cons
Other Thoughts
Pros
great value and Made in the USA! works great
Cons
Other Thoughts
Pros
Great value for the price, and it is made in the USA!Easy to use.
Cons
none
Other Thoughts
Pros
I started using this foiler and the time I spend foiling has been cut in half, literally. It took some practice and a little getting used to as far as adjusting it so it foiled evenly, but once I had it down, I was able to breeze through foiling with the greatest of ease!
Cons
I had a little trouble initially adjusting it and I find myself not using it for tiny pieces (which I am slowly learning to avoid anyway!) I still hand foil the teeny pieces like leaves on flowers or even some edge pieces.
Other Thoughts
I accidentally put an older roll of foil that I had sitting around, on the foiler and there was some adhesive or something sticky on the roll. It HAS to be good quality foil which comes off the roll easily or it will disappoint you. Other than that, I LOVE this new tool!
Pros
Can remove links to adjust size. Really nice bracelets for the price!
Cons
Can not think of one.
Other Thoughts
Pros
Nice variety
Cons
few broken ones
Other Thoughts
Pros
The pieces were not all uniform size (2x2 or 4x4). Nice selection
Cons
Too many pieces of Black Cherry which turns out black when fused (useless)
Other Thoughts
Pros
This is a fabulous mold. Its really true...your piece will not need any cold working! The sky is the limit with this mold!
Cons
None!
Other Thoughts
I used these molds when I took a class from Patty and every piece came out of the kiln with smooth edges! Wonderful!!
Pros
Nice size pendant. Worked up great.
Cons
None at present
Other Thoughts
Pros
easy to use---only need to cust one circle for the other layer. Very good price!
Cons
Other Thoughts
I really love the convenience. Shippping for one piece is really high due to packaging, & need to have its own box shipped, but you can increase the quantity of circles a lot with very little change in shipping!
Pros
The assortment lets you design with single or multiple flower paterns. Varied sizes within the package.
Cons
Bigger package would be nice.
Other Thoughts
Pros
Takes only a little time to heat. I used a heat gun. Once cooled the glass stuck very well. I spread adhesive on the wall and on the back of the mesh for best results.
Cons
First package I got did not work very well because there wasn't as much glue on the mesh as the second package I used.
Other Thoughts
Use the enclosed paper when heating or the mesh will stick to your work area. If this happens just heat again until loose
