Shop By Category
4 Days Only - Save on the Taurus 3 and Max 10
community : product reviews
 
Product Reviews
1
...
377
378
379
...
604
Ruby Paste Flux - 2 oz by [email protected] on April 3, 2014 5 stars
Pros
when you put it on you can do a large area and still see where it is. i like that it doesn't run all over your project. the cost is fair also and i have less waste because it stays in place. that makes it more cost effective.
Cons
none
Other Thoughts

Mastercraft 60/40 Solder - 1 lb. by [email protected] on April 3, 2014 5 stars
Pros
i really like the fact that it gives me a longer time to adjust the solder line.
Cons
none
Other Thoughts
i wish they made all the solder in different colors an not have to use any patina or make more colors of patina.

Glass Tools Value Kit by debbiemay509 on April 3, 2014 4 stars
Pros
good value for the price.
Cons
The plastic pliers
Other Thoughts

Handy Foiler With Smooth Roller by tsart42 on April 2, 2014 4 stars
Pros
The foiler is especially useful for foiling textured glass with the different widths on the handle.
Cons
Would like to have a pointed end in order to get into those hard to adhere grooves.
Other Thoughts
If I'm not mistaken, the older design had a pointed end.

Professional Box Maker by mm32935 on March 30, 2014 5 stars
Pros
Worked exactly as I expected.
Cons
Smaller than expected; will need the wedges for larger projects
Other Thoughts

1" X 3" Rectangle Bevel by GracieMarie (top contributor) on March 29, 2014 5 stars
Pros
A must for cabinets and doors, an elegant finish for hanging art. A wide choice of sizes to fit any project.
Cons
Other Thoughts

1" x 2" Rectangle Bevel by GracieMarie (top contributor) on March 29, 2014 5 stars
Pros
A must for cabinets and doors, an elegant finish for hanging art. A wide choice of sizes to fit any project.
Cons
Other Thoughts

Fusing Photo Paper - 10 Pack by hnathlm on March 28, 2014 5 stars
Pros
Easy to use
Cons
Can't do color
Other Thoughts
Bought a MICR (check-printing) toner cartridge for my printer to get correct iron content. Check online to see if there is one available for your printer. Most of the newer laser printers don't have the required iron content in their regular cartridges, but the MICR cartridges need the iron to enable them to be machine-processed. Fired above tack fuse, but below full fuse. 200 deg. ramp to 1100, hold for 20 min., ramp at 500 deg. to 1325, hold for 10 min., drop to 950 and hold for an hour, then 100 deg/hr to 700 deg. Nice deep brown image on flat glass, did not cap it, will probably try fusemaster over-glaze to protect it. Slumped into a wavy dish shape at 200 deg/hr to 1000 deg. then 500 deg/hr to 1280, soak for 20 min., drop to 950 and hold for 1 hour, then 100 deg/hr to 700. Slumped perfectly and did not distort image.

Glastar All Star G8 Grinder by scidhumouse on March 27, 2014 5 stars
Pros
Read all the other reviews and add this to them. I'm extremely mechanically enclined and work with many tools in many trades. This is a great tool for this trade. This tool makes me look like I know what I'm doing... You get what you pay for and this tool is well worth the money. I left the bit on it for 4 years while I had other projects going. Removing the bit was no problem. The bit, after extended use, still works like new. I can't say enough about this grinder. I'm going to buy their disk grinder next.
Cons
Other Thoughts

Tracing Vellum by LisaHill on March 25, 2014 4 stars
Pros
This paper is very easy to work with. The paper feels thick yet it is easy to see through
Cons
Other Thoughts

Safety Tape by mzwhalen on March 24, 2014 5 stars
Pros
Saves fingers from cuts while moving glass and grinding Gives grip Easy to apply
Cons
Comes off easily when wt, other wise have to cut it off, but not really a con
Other Thoughts
Love this stuff...has saved my fingers and grinding grip is more secure

Mastercraft Lead-free Solder - 1 lb by aslan96 on March 22, 2014 5 stars
Pros
I have been using this solder for nearly 4 years now and I do like the results. It solidifies very quickly which comes in very handy for tack fusing and use on 3D objects. One tip for using this is to get a temperature control for your soldering iron; I currently use a Hakko with a Mika temperature control to adjust the solder to its sweet spot. I find by setting the temperature control to 80-85% the solder flows well without any issues. Be sure to do frequent cleanings of the soldering iron tip with a cleaning block and you will find this solder works just fine.
Cons
Price
Other Thoughts
I would highly recommend this product; just make sure to use higher temperature settings on your temperature control, than you are used to from lead based solder and it will work fine.

Studio Pro Glass Organizer by kimcook (top contributor) on March 21, 2014 5 stars
Pros
These are such a help with organizing my glass sheets and best of all I can see all the beautiful colors all the time.
Cons
Other Thoughts

Van Gogh Bronze and Blue by kimcook (top contributor) on March 21, 2014 5 stars
Pros
Love the look, very classy.
Cons
Other Thoughts

NOT FOR INDIVIDUAL SALE - Land and Sea Glass Pack by kimcook (top contributor) on March 21, 2014 4 stars
Pros
vivid colors, I love them and they are perfect for the animals and backgrounds I make.
Cons
Smaller than the sizes I normally purchase. Will need more than one set to have enough glass.
Other Thoughts

Clear Garden Leaves Bevel Cluster by DonnaA.Smith on March 19, 2014 4 stars
Pros
Excellent spark with a tree of life creation. Unexpected interest created in the finished product.
Cons
Other Thoughts

1
...
377
378
379
...
604