Shop By Category
Final Hours - Save on the Taurus 3 and Max 10
community : product reviews
 
Product Reviews
1
...
422
423
424
...
605
Fusing Photo Paper - 10 Pack by frankpr on January 28, 2013 4 stars
Pros
Great for pictures or graphics. Easy to use.
Cons
Not good for projects that need full fuse or draping. Slumping results are very good if the shapes are not too severe. Fusing above 1350°F will degrade or burn off the image. Also, the movement of liquid glass deforms the image.
Other Thoughts
The picture seems to lighten as the temperature goes up. My best results were fusing to about 1300°F-1350°F. Use only a black and white image for printing. If using a color picture, make sure it has good contrast. Use on light colored glass. When fused uncapped, the image will turn a light sepia tone. Capped, the image is more reddish or auburn. If using the HP1020 printer, set the paper setting type to "Heavy" and run 4 to 5 sheets on regular paper right before printing on the photo paper to ensure the printing temperature will "fix" properly the iron oxide to the photo paper. Take the glass temperature up slowly to about 1100°F and then soak for about 20 minutes to burn off the binder material. Then ramp the heat to a max of about 1300°F - 1350°F, depending on the kind of project being done. Have had excellent results on flat pieces and in slumping plates.

Papyros Shelf Paper - 20-1/2" x 20-1/2" Sheet by Jackie L on January 28, 2013 5 stars
Pros
Papyros paper lasts me thru 3, sometimes 4 firings most times. It does not get all powdery.
Cons
It does leave the bottom of the glass a bit rougher than thinfire paper.
Other Thoughts

Liva Stained Glass Polish - 12 Oz by klsprech (top contributor) on January 28, 2013 5 stars
Pros
nice polish and price is good.
Cons
Other Thoughts

Gryphon Wet Belt Sander by kroening on January 26, 2013 5 stars
Pros
works well out of the box, belts are easy to get from Delphi or Griffin and easy to change, makes very quick work of grinding and beveling, price is right, not to heavy to move around tilts easily and stays wet
Cons
the metal shelf does rust so I will dry it off and cover it with duct tape, does spray water but what wet grinder or tool doesn't
Other Thoughts
this does what I want it do at a good price and very quickly

Heart Millefiori Assortment - 96 COE by sandymicks on January 25, 2013 5 stars
Pros
Fabulous product to work with. Colour intensity is great
Cons
small package
Other Thoughts
Larger package same price :)))))

Teardrop Trio Earring & Pendant Jewelry Mold by lalaroro on January 24, 2013 5 stars
Pros
Great price! I like the shape, the holes for attaching to jewelry, and the fact that it has the three reservoirs.
Cons
None
Other Thoughts
I have more expensive jewelry molds, but I like this one better. You MUST use MR97 or you will have a problem getting your piece out of the mold.

Antique Silver Variety Art Bails - 5 Pack by ambucchino (top contributor) on January 24, 2013 4 stars
Pros
I like these because they are large and will take a chain with a larger clasp. They also look good on a larger cabochon.
Cons
They are not dainty looking so be careful how you use them.
Other Thoughts
A nice substitute when the bright silver bails need to be toned down.

Royal Antique Green - 90 COE by spisano on January 20, 2013 4 stars
Pros
Striking product.
Cons
Green pigment is water soluble. Don't try to grind it before it is fused like I did! The green rinses off.
Other Thoughts
Slightly softer than Bullseye so make sure any seams in the underlying glass are tight or it will sink and leave a thin spot. DON'T GET IT WET before firing!

Glass Painting Acrylic Enamel Assortment by spisano on January 20, 2013 5 stars
Pros
Colors mix like paint. Nice color assortment.
Cons
A little thick out of the tube but works fine when thinned with water.
Other Thoughts
Use them like acrylic paints. Fired to 1300 without any problems burning off. Worked better when applying multiple thing layers vs. on thick layer.

Ruby Paste Flux - 2 oz by klsprech (top contributor) on January 20, 2013 5 stars
Pros
good flux except it stained the coral I was tring to solder to a peice.
Cons
Other Thoughts

Mastercraft 60/40 Solder - 1 lb. by klsprech (top contributor) on January 20, 2013 5 stars
Pros
great value and Made in the USA! works great
Cons
Other Thoughts

Mastercraft 50/50 Solder - 1 lb by klsprech (top contributor) on January 20, 2013 5 stars
Pros
Great value for the price, and it is made in the USA!Easy to use.
Cons
none
Other Thoughts

Table Foiler by LHerath on January 20, 2013 5 stars
Pros
I started using this foiler and the time I spend foiling has been cut in half, literally. It took some practice and a little getting used to as far as adjusting it so it foiled evenly, but once I had it down, I was able to breeze through foiling with the greatest of ease!
Cons
I had a little trouble initially adjusting it and I find myself not using it for tiny pieces (which I am slowly learning to avoid anyway!) I still hand foil the teeny pieces like leaves on flowers or even some edge pieces.
Other Thoughts
I accidentally put an older roll of foil that I had sitting around, on the foiler and there was some adhesive or something sticky on the roll. It HAS to be good quality foil which comes off the roll easily or it will disappoint you. Other than that, I LOVE this new tool!

1
...
422
423
424
...
605