Pros
I teach mosaics, so the 10 Nippers I own are in constant use. They are great for cutting small ceramic shape tiles as well as shaping vitreous glass. Sometimes problematic with stained glass that is too thin to fit between the wheels. The wheels DO come loose with usage, but are easy to tighten. Wheels dull quicker than I would like but replacements are inexpensive. Basically a solid and reliable studio tool.

Cons
The plastic coating on the handles frequently split and come off - so I just re-wrap them with duck tape. Not a great solution but it works.

Other Thoughts

Pros
WOW! Great to use blade. Why didn't I switch to this sooner? Super fast, smooth cutting. Like previous review, almost like machine is new. Much smaller kerf (gap). Can use side of blade like a grinder to perfect edges not cut. Liked being able to fully see my cutting line again, since it doesn't need that adapter to keep from wobbling like regular blade does. Cut 20 Cardinals wings in a FRACTION of time it take to cut a couple with normal blade!

Cons
Wonder how long it lasts since you only really go from the front on cutting instead of all around. From back is MUCH slower (like normal blade) and wobbles a bit. A little tight to initially get in the channel when installing.

Other Thoughts
Should probably include instruction on set up. Not sure if I'm supposed to use the stability adapter or not, but found blade pretty stable without it. If lasts long enough to justify expense, will definitely buy again!!!!

Pros
I've used this Mastercraft 50-50 solder for 3.5 years and have had very good success with it. It can be temperamental regarding the heat however.

Cons
Possibly the way this solder is temperamental to the heat or lack thereof.

Other Thoughts

Pros
I've tried several different consistencies, and it seems to work best when really thick.

Cons
It can flake right off of the glass when you are trying to carve it and clean it up, but I've found that I can put a little more wet medium down and sort of 'glue' the piece that fell off back on to the glass.

Other Thoughts
It would be nice if it would mix to a consistency that was really smooth - i expected it to draw on the glass more like those 'puff paints' or glitter glue does, but its not that smooth. I recommend making it super thick and using as small of a hole in the bottle cap as possible while still getting it to flow out. Cleanup and carving with various sizes of xacto knives works best. Also, rather than carving pieces away to clean the edges, you can push the edges inward to make them sharper. That helps prevent too large of a chunk from getting cut away by accident. all in all, a fun new way to expand your creativity!!

Pros
The larger size is perfect for the standard bar of soap, and the deep groves are a definite bonus!

Cons
none

Other Thoughts
I will be buying several to have ready to use.

Pros
Perfect use for scrap and bad ideas. Creates areas of color which add interest. EASY to do!

Cons
There are 5 distinct areas in the finished piece, but I think they're interesting.

Other Thoughts
Use a lot of white or clear scrap - darker colors want to dominate. You absolutely must have kiln posts (4) and glass dams (4). I use a 1" kiln post and 4 8" dams to support the pot and fit my kiln.

Pros
This is a nice little dish but the actual measurement of it is 3-3/4" by 3". It is a small rectangle, not a square. If you're looking for a small square dish, look elsewhere.

Cons
Incorrect measurement in Delphi's description

Other Thoughts

Pros
This is a silver-plated copper bracelet meaning it won't rust like silver-plated steel; a not uncommon issue. The finish is nice, it works well and is great for the price point. I order 20 at a time!

Cons
Sometimes the clasp has to be tightened; an easy job with a small pair of pliers. It's only silver plated...not pure sterling, but what do you expect at this price?

Other Thoughts
I always etch the discs and the back of my glass pieces with my Foredom tool, clean everything with alcohol and then glue the pieces on with E-6000. I've never had a piece come off!

Pros
This is much quieter than the hot head torch and the ability to adjust the oxy content beats the foil system for Hot Head any day. I recommend if you are new to lampworking and want to play with reactive glasses. You won't get the same intense reactions as an oxy torch, but it beats trying to fiddle with foil and make a bead at the same time. We also find it easier to clean than a Hot Head. Been using it for about 5 years and still works great.

Cons
The built in igniter is junk and breaks after a few uses. Not really a drawback since the Hot Head needs to be ignited by hand as well.

Other Thoughts
Great torch at a great price. We think it's perfect for beginners with less problems than the Hot Head. We've had disagreements in our classes about who gets to use the Fireworks torch.

Pros
Works great and is easy to use.

Cons
None

Other Thoughts

Pros
The best!

Cons
None

Other Thoughts

Pros
Love this!! easy to use and fun. Great with all the scraps I had left from my stained glass projects. Used the glass to make great earrings and pendants.

Cons
Just too Small and not enough kiln paper included

Other Thoughts