Pros
keeps my small work area cleaner and drier

Cons

Other Thoughts
I used to use a cardboard shield, but this works much better

Pros
easier to center foil, saves time overall

Cons
takes practice to get it right, still need to burnish the edges, corners can be tricky

Other Thoughts
learning was a challenge, but worth the effort

Pros
very detailed. able to fuse wires for antenna.

Cons
butterfly turns out beautifully but is heavy and kind of big for incorporating into projects

Other Thoughts
would like a smaller size as well

Pros
nice definition on the body and wings. Able to slump on back side of mold

Cons
none

Other Thoughts

Pros
Released easily with MR97, five thin coats for the first application and three thereafter. Make sure you fill the edges evenly. Used combo of medium and fine frit to fill the edges and broken up odd cuts. I already have orders from coworkers who really like this even if it is not slumped. Have created 6 castings so far and each has been great, no spurs. Provided fusing schedule has worked well.

Cons
None, good way to use up scraps!

Other Thoughts
Wish they had a larger version.

Pros
I love this mold. The shape of the hole lends itself to several creative alternatives for using this as a focal piece. I have never been disappointed by Delphi molds. I use MR97 and these pieces fall out of the mold after firing.

Cons

Other Thoughts

Pros
Does the job

Cons
Can only miter in one direction. Need to flip piece over and remark to get cut in opposite direction. Used for ten year and motor finally burned out. Under powered and belt driven.

Other Thoughts

Pros
Nice rich green color. Great for leaves, trees, etc. Cuts easily. Retains color when fired.

Cons
None

Other Thoughts

Pros
Nice "limey" green color. Cuts easily. Retains color when fired.

Cons
None

Other Thoughts

Pros
fast precise cuts, intricate cuts, quiet, easy to clean.

Cons
not really a con, but I do wish there was more room between the blade and motor it would make it easier to cut larger pieces.

Other Thoughts
I've been using the Taurus 3 for about 5 months I really love the saw; It's made a huge differance in my fused glass projects I now have more options for intricate cuts on a piece. I wouldn't hesitate to recommend the Taurus 3 saw.

Pros
Works great when using clear glass. Great adhesion

Cons
none

Other Thoughts

Pros
works well with zinc channel. consistent finish

Cons
none

Other Thoughts

Pros
works great for medium sized panels. Accepts 4mm glass well

Cons
none

Other Thoughts

Pros
strong yet light weight. Works well with most large panels.

Cons
none

Other Thoughts

Pros
easy to work with, flows smooth

Cons
none

Other Thoughts

Pros
light weight and easy to work with. Consistent heat with no fluctuation

Cons
none

Other Thoughts

Pros
great clarity and consistent quality

Cons
none

Other Thoughts
creates an elegant border that balances well with most any design

Pros
Delphi M3900 double strength mirror glass is really nice to work with. Cuts cleanly without losing the mirror surface backing. So cleanly that you can cut the line the first time and avoid grinding most of the time. I combine it with Spectrum SilverCoat with dazzling results.

Cons
None

Other Thoughts
Be sure to seal the edges before wrapping with foil.