Shop By Category
Final Hours - Save on the Taurus 3 and Max 10
community : product reviews
 
Product Reviews
1
...
444
445
446
...
605
Layout Block Bundle by glsslvr (top contributor) on August 10, 2012 5 stars
Pros
A perfectly squared up panel is a necessity to me, so I use my steel square tool to get perfect 90 degree angles while pinning the layout blocks down. Also, if you're keeping your panel within a certain size, your outside dimensions are there to work within! I never work without my layout blocks.
Cons
Can't think of a single bad thing!
Other Thoughts
I have an abundance of these in all available lengths. I wish they came in circular pieces too!

24" x 24" x 1/2" Homasote Board by glsslvr (top contributor) on August 10, 2012 5 stars
Pros
My homosote stays on my work table. It is ugly after years of laying out and soldering on it. I can't imagine how you do stained glass without this product.
Cons
Other Thoughts

Deluxe Magnifier Lamp by glsslvr (top contributor) on August 10, 2012 5 stars
Pros
I have one of these positioned between my grinder and my saw. It's amazing how much better my pieces fit together when I can actually see what I'm grinding off! I literally NEVER grind without the light and magnifier.
Cons
Lets see....better lighting, magnified view....nope, no cons!
Other Thoughts
I worried at first about water splashing on the hot light, but so far haven't had any issues with it.

Mr. Splash Grinder Station by glsslvr (top contributor) on August 10, 2012 5 stars
Pros
It's amazing how much ground glass "slurry" this back splash catches. Every once in awhile, when I actually notice the build up on it, I take it outside and hose it off. Voila! Almost like new.
Cons
None. I've used the same one for years and years.
Other Thoughts

Morton Mini Surface Plus - 2 Pack by glsslvr (top contributor) on August 10, 2012 5 stars
Pros
This isn't rocket science. I use one grid under my grinder and one for my cutting surface. It catches all those nasty little shards. You know, the ones that stick in your fingers when you accidentally wipe your hand across the work table.
Cons
None!
Other Thoughts
I've used the same 2 grids for years. Occasionally I carefully carry them out to the trash and dump them out. Follow up with a good spray with the garden hose and they're like new.

Taurus 3 Ring Saw by glsslvr (top contributor) on August 10, 2012 5 stars
Pros
I think the best addition to my studio has been this saw. I suppose a purist wouldn't approve, but I save glass and aggravation by taking my difficult cuts to the saw. I've had mine for 4 years and am on the second blade.
Cons
The replacement blades are expensive. However, if you watch for them on sale and take care to use your saw correctly, the expense isn't really so bad.
Other Thoughts

Stained Glass Finishing Compound - 12 oz by glsslvr (top contributor) on August 10, 2012 5 stars
Pros
I love this finishing compound. It cleans any remaining gunk...glue, marker lines, whatever....from the glass. Both the glass and your solder lines shine after a good polishing with this compound.
Cons
It removes a little of the patina. Black comes out a pretty gunmetal color. Copper on the other hand really brightens and shines.
Other Thoughts
It's a little hard to get the residue out of small pieces and tight areas. I've found using a dampened Q-tip works wonders. Don't kid yourself, though. The wonderful shine comes from elbow grease as well as the Finishing Compound!

Tinning Block by glsslvr (top contributor) on August 10, 2012 5 stars
Pros
I keep my Tinning Block close while soldering and use it frequently, especially if it's a large panel. It REALLY makes a difference in how easily your solder flows. I've been using the same block for years and years.
Cons
None!
Other Thoughts
I haven't actually tried this, but my local stained glass shop said you can rub a wet paint brush on your Sal Ammoniac and use it to give 3-D items cut from 24 gauge sheet copper that nice blue-green patina.

Kwik-Clean Flux Cleaner - 16 Oz by glsslvr (top contributor) on August 10, 2012 5 stars
Pros
I'm a big fan of scrubbing my panels in the sink with Dawn. In reality though, they don't all fit in the sink! Kwik-Clean is the answer. I went through the first bottle and ordered the giant economy size. It works incredibly well and feels like you're doing nothing more than spraying water!
Cons
Other Thoughts

Solder Wick by glsslvr (top contributor) on August 10, 2012 5 stars
Pros
My son first told me about Solder Wick. It is a life saver...well, okay a time saver...when you accidentally flood a small piece with solder. Haven't we all had that happen? Nothing worse than trying to uncover a tiny piece of glass filled with solder. Solder Wick just mops it all up like magic!
Cons
You have to be a little careful as it gets HOT when full of hot solder.
Other Thoughts

Glas-Snapper Running Pliers by glsslvr (top contributor) on August 10, 2012 5 stars
Pros
I received this as a gift and didn't use it for a long time because I was so familiar with my trusty old pliers. When I finally tried them I was pleasantly surprised. It easily and neatly breaks pieces too small for standard running pliers. So much easier than trying to hold a small piece with your fingers, or another pliers, while you snap it off. A great addition to any work shop.
Cons
As good as it is, it still can't break the very tiny pieces....has to have enough glass in the "jaws" to be able to stress the score.
Other Thoughts

Uroboros Cobalt Blue Opal - 90 COE by thadenmosaics on August 10, 2012 5 stars
Pros
Easy to cut, I love this for mosaics - nice rich blue color!
Cons
Other Thoughts

Oceanside Mariner Blue Opal - 96 COE by thadenmosaics on August 10, 2012 5 stars
Pros
Easy to cut, I love this for mosaics - nice rich blue color!
Cons
Other Thoughts

Oceanside Medium Blue Opal - 96 COE by thadenmosaics on August 10, 2012 5 stars
Pros
Easy to cut, I love this for mosaics - nice rich blue color!
Cons
Other Thoughts

1
...
148
149
150
...
202