Shop By Category

Bullseye Tekta Clear Double Thick - 90 COE

Bullseye Tekta Clear Double Thick - 90 COE by Bullseye Glass Co.
Unit Size* Price Qty 
medium 12" x 12"
$29.75
sale $20.75 USD
large 16" x 24"
$78.95
sale $54.95

Item# B110068   In Stock

Product Features

  • Superbly uniform, flat, clear and lead free
  • Ideal for base or cap glass
  • Each sheet has four trimmed edges
  • Double thick, 6mm
  • 90 COE


Product Description

Bullseye's Tekta glass is the ultimate clear sheet glass for kilnforming. It's easy-to-work-with, uniform, flat and affordable. Each sheet has four trimmed edges, and is an ideal base or cap glass. Double thickness 6 mm. 90 COE.

Tekta is manufactured on a production line at the Bullseye Glass Co. factory in Portland, Oregon, where the production is carefully monitored to insure that the glass is formed, tested, and packaged to the highest possible standards.

For stained glass it offers a smooth surface on both sides. With double the thickness of regular stained glass, it's ideal for cabinet inserts and other projects that take a more durable product.

Crab plate by artist Suzanne Brueher. Copper Celtic Cross by artist Teresa Shea. Circle display created with a texta base by artist Sheila Rosa. Pendant created by artist Ann Yates. All from Delphi's Online Artist Gallery.

Photo above is a general representation of glass colors. Colors may vary. Sizes are approximate.

Customer Reviews

4.7 out of 5 stars
5 star  
  2
4 star
  1
3 star
  0
2 star
  0
1 star
  0
See all 3 customer reviews
Write a customer review

Product Images from Customers

Be the first to share product images with other customers
5 out of 5 stars
  •   clear glass
By on
Pros : need i say more?
Cons :
Was this review helpful to you?  
5 of 8 people found this review helpful
4 out of 5 stars
  •   clear glass
By on
Pros : It didn't break in shipping.
Cons : It was a little thicker then I needed. I could have used a 5mm or 4mm.
Was this review helpful to you?  
4 of 8 people found this review helpful
5 out of 5 stars
  •   A must have for larger pieces!
By on
Pros : This glass is perfectly clear and very smooth. It is easy to work with and cuts cleanly. The thickness eliminates the need to layer, which reduces bubbles and saves time. It fuses beautifully and the smooth edges reduces waste.
Cons : Smaller pieces are harder to cut due to the thickness, but for the purpose of anything larger than a few inches, it is perfect.
Was this review helpful to you?  
6 of 12 people found this review helpful

See all 3 customer reviews
Related Content
My commuting jacket is drying over a kitchen chair, and the cat has come down off the workbench to sniff the sleeve with deep suspicion. Fair enough. Theres a stripe of brown grit up the back, the kind wet roads and mashed leaves throw up all autumn.That grit ends up on brakes too. So heres a short pre-winter check for Defiant riders. Im working from general technique and the JupiterBike product listings, not from my own bike.Why autumn chews through brake padsQuick jargon check. On a disc brake, a metal disc called the rotor is fixed to the wheel hub. Two pads squeeze it to slow you down. They sit in a caliper, the clamp that straddles the rotor.Wet roads carry grit and leaf mush onto the rotor. When you brake, that grit gets trapped between pad and rotor and works like sandpaper, so the same commute wears pads faster
My commuting jacket is drying over a kitchen chair, and the cat has come down off the workbench to sniff the sleeve with deep suspicion. Fair enough. Theres a stripe of brown grit up the back, the kind wet roads and mashed leaves throw up all autumn.That grit ends up on brakes too. So heres a short pre-winter check for Defiant riders. Im working from general technique and the JupiterBike product listings, not from my own bike.Why autumn chews through brake padsQuick jargon check. On a disc brake, a metal disc called the rotor is fixed to the wheel hub. Two pads squeeze it to slow you down. They sit in a caliper, the clamp that straddles the rotor.Wet roads carry grit and leaf mush onto the rotor. When you brake, that grit gets trapped between pad and rotor and works like sandpaper, so the same commute wears pads faster
My commuting jacket is drying over a kitchen chair, and the cat has come down off the workbench to sniff the sleeve with deep suspicion. Fair enough. Theres a stripe of brown grit up the back, the kind wet roads and mashed leaves throw up all autumn.That grit ends up on brakes too. So heres a short pre-winter check for Defiant riders. Im working from general technique and the JupiterBike product listings, not from my own bike.Why autumn chews through brake padsQuick jargon check. On a disc brake, a metal disc called the rotor is fixed to the wheel hub. Two pads squeeze it to slow you down. They sit in a caliper, the clamp that straddles the rotor.Wet roads carry grit and leaf mush onto the rotor. When you brake, that grit gets trapped between pad and rotor and works like sandpaper, so the same commute wears pads faster