Shop By Category

Heart Trio Earring & Pendant Jewelry Mold by Creative Paradise

$21.95 USD
Item# 80749
In Stock Usually ships in 1 to 2 business days.

Product Features

  • Fits in small kilns
  • Ceramic molds can be used many times
  • Creates unique glass jewelry sets in 1 firing
  • Finished pendant measures 1-1/2" wide x 1-1/2" long
  • Finished earrings measure 1-1/4" wide x 1-1/4" long


Product Description

Create Cast Glass Pendants and Earrings
Fill pendant molds with glass frit, scrap and powders to create one-of-a-kind cast glass jewelry sets. Try combining powders to create a marbled look or accent with dichroic. The possibilities are endless!

Ceramic molds can be used many times. Coat molds with ZYP Boron Nitride Spray or casting mold primer before use. See size perspective of mold with quarter and dime images shown. Mold measures 4" wide x 4-1/2" long. Finished pendant measures 1-1/2" wide x 1-1/2" long at the widest points. Finished earrings measure 1-1/4" wide x 1-1/4" long at the widest points.

Mold uses 10 grams of frit or scrap glass in large heart and 6 grams of frit or scrap glass in each small heart.

Images courtesy of Creative Paradise Inc.

Delphi Tip: The amount of frit added into the mold defines the shape of the finished piece. For detailed designs, use a generous amount of frit.

Customer Reviews

4 out of 5 stars
5 star  
  2
4 star
  3
3 star
  2
2 star
  0
1 star
  0
See all 7 customer reviews
Write a customer review

Product Images from Customers

Be the first to share product images with other customers
3 out of 5 stars
  •   Don't fill past top of post
By on
Pros : Even heart shaped pendant and earrings
Cons : Can be difficult to remove items from mold due to straight sides
Was this review helpful to you?  
0 of 1 people found this review helpful
4 out of 5 stars
  •   Nice mold
By on
Pros : Worked well. Kept shape well and good size.
Cons : None
Was this review helpful to you?  
3 of 5 people found this review helpful
3 out of 5 stars
  •   Good Mold, Poorly Shaped
By on
Pros : I tried this mold originally with Primo Primer, and the cast pieces did not fuse properly (they had little spikes at the top where the frit settled). After consulting Delphi, I switched to using MR-97 and the pieces turned out beautifully smooth and popped out of the mold easily. I would certainly recommend using MR-97 as the release for this mold even though it costs a good deal more than Primo Primer. The hole in the mold is the perfect size to hang the cast pieces, and cords and thin chain easily fit through it.
Cons : The cast pieces are not particularly heart-shaped (the indent at the top of the hearts is not pronounced enough), which is a disappointment. Also, the "earring" sized cast pieces far too heavy to be worn as earrings, and I personally found the pendant sized cast piece a bit large to wear on a necklace as well (I would certainly call it statement jewelry). Having said that, the earrings made nice pendants and the pendant made a nice ornament to hang in a window.
Other Thoughts : If you are considering using a mold which will make holes, I recommend Delphi's Simple Round Beads Mold instead- it casts 6 pieces instead of 3, and I consider all of the pieces it casts to be wearable sizes for pendants.
Was this review helpful to you?  
25 of 27 people found this review helpful

See all 7 customer reviews
Related Content
Feb 04, 2016
Frit Molds are becoming increasingly more popular, especially with all the new styles of jewelry molds coming out. Getting a beautiful finished project can be tricky at times. Issue #1 Glass tends to stick; and create sharp daggers on the sides of the glass project. This can happen when the glass separator is getting thin or worn away. Boron Nitride MR-97 is the answer. It is a versatile product that can also be used on stainless steel molds as well. Think of it like teflon on your frying pan. It will not allow the glass to stick to the mold. Projects pop right out and are ready to wear. You do have to follow the instructions and reapply as directed. Watch a video on how to use Boron Nitride MR-97. However if you do get spurs on the sides of your project, simply use a wet hand sanding pad
Feb 04, 2016
Frit Molds are becoming increasingly more popular, especially with all the new styles of jewelry molds coming out. Getting a beautiful finished project can be tricky at times. Issue #1 Glass tends to stick; and create sharp daggers on the sides of the glass project. This can happen when the glass separator is getting thin or worn away. Boron Nitride MR-97 is the answer. It is a versatile product that can also be used on stainless steel molds as well. Think of it like teflon on your frying pan. It will not allow the glass to stick to the mold. Projects pop right out and are ready to wear. You do have to follow the instructions and reapply as directed. Watch a video on how to use Boron Nitride MR-97. However if you do get spurs on the sides of your project, simply use a wet hand sanding pad