Shop By Category
4 Days Only - Save on the Taurus 3 and Max 10

1" Coarse Twofers Grinder Bits - 2 Pack

1" Coarse Twofers Grinder Bits - 2 Pack by Aanraku Studios
$54.95 USD
Item# 639117   In Stock

Product Features

  • 2 Superior Quality Bits at 1 Low Price
  • Coarse Grit for Aggressive Grinding
  • Diamond Coating Guaranteed Not to Peel!
  • Doubled Plated for Longer Product Life
  • Large 18MM Abrasive Height for Uniformed Grinding


Product Description

Two Superior Quality Bits at One Value Price
Aanraku's Twofers Grinder Bits offer superior quality at a low-cost. The diamond abrasive grinding surface is double plated for strength, durability and long life. It's large 18mm bit height gives you a larger grinding surface, designed to maximize bite and allows for the uniform grinding. Diamond coating guaranteed not to peel!

60 diamond mesh grit and 1" diameter. Use it to quickly and aggressively grind away at the glass. Fits Techniglass, Gryphon, Glastar and Inland grinders.

Delphi Tip: Getting the Most from Your Grinder Bits
Grinder Bits can be expensive, so make sure that you're utilizing all of the diamond coating. When you first install your bit, line it up so the bottom of the grit lines up with the top of the grinder work surface. When the exposed diamond coating is no longer effective, loosen the set screw and drop the bit down so the used portion is under the work surface exposing fresh grit that's ready to be used.
 

Product Details

  • 60 Grit

Customer Reviews

4.7 out of 5 stars
5 star  
  2
4 star
  1
3 star
  0
2 star
  0
1 star
  0
See all 3 customer reviews
Write a customer review

Product Images from Customers

Be the first to share product images with other customers
5 out of 5 stars
  •   Course bits
By on
Pros : Quick grinding. Less work and finger/hand fatigue
Cons : To much pressure could chip glass
Other Thoughts : Love them to grind large area
Was this review helpful to you?  
3 of 4 people found this review helpful
5 out of 5 stars
  •   super fast shaping!
By on
Pros : Put on this bit for your initial shaping, especially for bowls, plates. Does tend to chip - so be mindful of your line and switch to a finer bit when you are near the line. Saves hours of time!
Cons : If you don't use a finer bit, you will have to increase the temperature because your glass will have chips. Bye Bye perfect circles with crisp edges!
Other Thoughts : Remember to wear eye protection and also consider wearing a face shield and use an extra large grinder shield for safety.
Was this review helpful to you?  
5 of 8 people found this review helpful
4 out of 5 stars
  •   Two for one is a great deal!
By on
Pros : Great deal for price and power. I am glad I bought these. I am still on my first bit after 5 projects--some which required extensive grinding.
Cons : It seems that now the first bit is wearing fast.
Other Thoughts : Will buy again.
Was this review helpful to you?  
3 of 6 people found this review helpful

See all 3 customer reviews
Related Content
My commuting jacket is drying over a kitchen chair, and the cat has come down off the workbench to sniff the sleeve with deep suspicion. Fair enough. Theres a stripe of brown grit up the back, the kind wet roads and mashed leaves throw up all autumn.That grit ends up on brakes too. So heres a short pre-winter check for Defiant riders. Im working from general technique and the JupiterBike product listings, not from my own bike.Why autumn chews through brake padsQuick jargon check. On a disc brake, a metal disc called the rotor is fixed to the wheel hub. Two pads squeeze it to slow you down. They sit in a caliper, the clamp that straddles the rotor.Wet roads carry grit and leaf mush onto the rotor. When you brake, that grit gets trapped between pad and rotor and works like sandpaper, so the same commute wears pads faster
My commuting jacket is drying over a kitchen chair, and the cat has come down off the workbench to sniff the sleeve with deep suspicion. Fair enough. Theres a stripe of brown grit up the back, the kind wet roads and mashed leaves throw up all autumn.That grit ends up on brakes too. So heres a short pre-winter check for Defiant riders. Im working from general technique and the JupiterBike product listings, not from my own bike.Why autumn chews through brake padsQuick jargon check. On a disc brake, a metal disc called the rotor is fixed to the wheel hub. Two pads squeeze it to slow you down. They sit in a caliper, the clamp that straddles the rotor.Wet roads carry grit and leaf mush onto the rotor. When you brake, that grit gets trapped between pad and rotor and works like sandpaper, so the same commute wears pads faster
My commuting jacket is drying over a kitchen chair, and the cat has come down off the workbench to sniff the sleeve with deep suspicion. Fair enough. Theres a stripe of brown grit up the back, the kind wet roads and mashed leaves throw up all autumn.That grit ends up on brakes too. So heres a short pre-winter check for Defiant riders. Im working from general technique and the JupiterBike product listings, not from my own bike.Why autumn chews through brake padsQuick jargon check. On a disc brake, a metal disc called the rotor is fixed to the wheel hub. Two pads squeeze it to slow you down. They sit in a caliper, the clamp that straddles the rotor.Wet roads carry grit and leaf mush onto the rotor. When you brake, that grit gets trapped between pad and rotor and works like sandpaper, so the same commute wears pads faster

You may also like

item: 5424
Waffle Grid Work Surface - 6 Pack
$89.95 $66.95
26% off
item: 5425
Waffle Grid Work Surface - 2 Pack
$36.95 $24.95
33% off
item: 54254
Waffle Grid Work Surface - 4 Pack
$63.95 $46.95
27% off
item: 1919
Delphi Tote
$9.95 $5.00
50% off
item: DUSAA
item: 1466